T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(2676 reviews)
Price: $45.39
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118467
Retail:$59.99
Our Price: $45.39
You Save: 24%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2676)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118467
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting, splicing or tapping
- Locate connection point in rear cargo area
- Plug in connector
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Protective connection terminals resist corrosion
- Comes with dust cap for 4-way flat connector
- 10-Amp mini fuse included
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5.6 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located in your rear cargo area, either behind the driver's-side trim panel or in the spare tire compartment. You will need to remove some interior paneling to access this harness. Once you've plugged in the connector, insert the provided fuse into the in-line fuse holder.
Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
118467 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
- 2018 - 2019 Subaru Crosstrek
- 2018 - 2024 Subaru Crosstrek excluding Hybrid
- 2020 - 2024 Subaru Crosstrek excluding Hybrid
- 2016 - 2017 Subaru Crosstrek non-Hybrid models
- 2016 - 2017 Subaru Crosstrek non-Hybrid models
- 2009 - 2024 Subaru Forester
- 2009 - 2024 Subaru Forester
- 2013 - 2024 Subaru Outback Wagon
- 2013 - 2024 Subaru Outback Wagon
- 2010 - 2012 Subaru Outback Wagon excluding Sport
- 2010 - 2012 Subaru Outback Wagon excluding Sport
- 2013 - 2013 Subaru XV Crosstrek
- 2013 - 2013 Subaru XV Crosstrek
- 2014 - 2015 Subaru XV Crosstrek non-Hybrid models
- 2014 - 2015 Subaru XV Crosstrek non-Hybrid models
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118467
Average Customer Rating: 4.8 out of 5 stars (2676 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Chris05/29/2022
Excellent product as usual from etrailer. This is probably the third wiring adapter I’ve brought from etrailer & they’re always plug & play. The only thing that varies is where the connector is located in the vehicle. Luckily Subaru places them in an easy to reach location. Out new 2022 Outback was the easiest yet. The instructions say to “Store the 4-Flat connector in the spare tire compartment when not in use”. I don’t like the idea of it being closed in the tailgate when in use so I run it through an oval I cut in the spare tire well using a grommet and silicone sealant to ensure it says water tight. The extra wiring is secured to the back side of the bumper and just enough lead hanging out to connect to my utility trailer.
by: Adam 01/26/2024
2010 Subaru XV Crosstrek
Very nice quality hitch and wiring harness. 24 Subaru Crosstrek. Easy half hour install on the hitch and 10 minute plug and play on the trailer harness. Very helpful folks at etrailer and super fast shipping
by: Welsey11/09/2023
Hitch came in great shape! Got the car apart the fist time and the hardware was wrong??. I called customer service and they shipped me the right one very quickly. Hitch went on easily with minor issues. The trailer harness was literally a plug in job works perfect. On the Subaru wilderness I was able to use a straight hitch. Over all very pleased.
by: Lindsey07/27/2023
2016 Subaru Outback Wagon
Installing this was SO EASY. I am not an electrician or a mechanic and have never modified any car before, but watching the installation video on the website was super helpful and I pretty much couldn't have done it without the video! I installed this in 30 minutes. I bet a person could do it even faster than that if they were more experienced than I am!
by: RW03/29/2023
2019 Subaru Outback Wagon
Looks good; not installed yet, which will be easy with the quick connector mated to the one provided in the vehicle.
Rw
3/30/2024
It works fine in our 2019 Outback. It takes patience to fish out the vehicles installed connector if you dont want to remove the interior panel, risking damage to clips, fasteners, etc. But once done, its out of sight, out of mind, and most importantly, out of the way!
by: David 04/25/2024
Installed hitch and wiring all went as expected a smooth easy install, everything works as advertised , the you tube video made the installation easy and the instructions were clear and understandable. We enjoy E-Trailer , will be ordering again soon . Thanks David
by: MontereyJake01/11/2024
Subaru Outback Wagon
I bought a Curt hitch for my Subaru Outback to allow me to mount a bike rack on it. Therefore I didn't think I'd need the tail light kit when I had it installed. I was wrong.
So adding the light kit later I wanted to install myself if possible. The guys at etrailer.com were great. The kit I thought I needed wasn't quite right for my needs, and they guided me to the proper model. It was inexpensive and easy to install-way easier than I ever imagined. The videos on-line clearly showed to process, and I think I got a professional looking job. Kudos to the etrailer team.
by: Paul 04/20/2024
2019 Subaru XV Crosstrek
Very easy install the wiring kit on 2019 Subaru Crosstrek. I watched the e-trailer video first, ordered the part and trim tool in the video. It took 15 minutes to install.
by: Mike01/31/2024
Subaru XV Crosstrek
I purchased this hitch and a wiring harness for my Subaru Crosstrek to haul a small aluminum boat. The installation of the hitch was fairly easy, the lighting harness was easier!
I am quite pleased with the product and would recommend it to friends.
by: David02/27/2024
he module in the middle was smaller than my last replacement, which failed (my Forester is getting old and I had a water leak that gets into the area where the module sits, which has since been sealed). The output wires leading to the 4-pin connector are labeled with their function, which helped me splice the existing wiring to the 4-pin connector, since the new harness has no body grommet under the spare tire, and it didn’t appear to be a standard grommet – I realize that would make the part unreturnable, but that was not an issue for me in this case. The bottom line is that the Subaru harness is a lot more expensive, and serves the same purpose, as this one, and the only thing the Subaru harness would add would be that grommet under the spare tire.
by: Jim in Florida12/13/2023
The most difficult part of installing this trailer wiring kit was removing all of the junk I accumulated in my rear compartment to access the connector harness.
Once I did it only took like 3 minutes to completely install and put the floor back in place.
It works flawlessly, but here's a little hint - do not allow your trailer 4-pin connector to be stored outside without a rubber insulating boot on ot to prevent corrosion or wasps from making a mud nest inside it. I use aluminum foil wrapped around in and dielectric grease.
Hope this helps.
by: Dean03/30/2024
Subaru Outback Wagon
Fits great under my 2022 Subaru outback. It is hardly noticeable. I definitely would recommend this hitch. Great product for the price.
by: Chuck 03/27/2024
Best price; best hitch for my vehicle; website easy to navigate and order; excellent diy installation videos; my shipping was free and received my order quickly.
by: John 12/03/2022
2018 Subaru Forester
well haven't put it in yet but the video tells me it should not be hard. I know i did the trailer hitch for my subaru forester that went easy.
John
12/4/2023
Awesome
by: Kevin12/20/2023
The installation process was fast and exactly the way it was described. The wiring harness is exactly as explained and there is plenty of length. It’s perfect for my homegrown jet ski trailer that needed a longer connection. After a year it still looks new.
by: James03/24/2024
2020 Subaru Outback XT. Easy to install. Used some silicone sealant to secure the module where it would be out of the way and not liable to be damaged. Works well.
by: Bob 02/26/2024
2021 Subaru Forester
rapid delivery. Mechanic said the install went perfectly. I have the bike rack on the hitch and ready to go.
by: Tracy02/07/2024
the wiring harness is working well. Spends a lot of time riding around since our towed vehicle is continually used. Initial setup was daunting but we have a great installer Terry's Auto in Fullerton, Ca.
by: Steven12/20/2023
Subaru Outback Wagon
Great 2" hitch for my '23 Subaru Outback Wilderness edition. Very low profile and looks professional & unobtrusive on the vehicle. I was able to install myself in about 2 hours. The installation video on etrailer website is extremely helpful as a step by step guide.
by: Larry D12/19/2023
2022 Subaru Forester
Perfect fit and connection! I ordered this for my 2023 Subaru Forester Wilderness edition. MUCH thanks to Ryan and the eTrailer team for the awesome installation video. The installation was plug and play and took me all of five minutes. Because I don't own a trailer, I chose not to pass the wiring through the grommet, leaving it inside the spare tire well to keep it clean and in good shape.
Thanks again eTrailer!
by: Virgil 03/19/2024
Not your all fault but box came busted up and will have to inventory items and paint the hitch. I don’t know about other areas but UPS here is typically rough on packages
by: Ted07/21/2022
2018 Subaru Outback Wagon
Everything delivered as ordered with easy installation instructions, and working perfectly. The etrailer website was very helpful in selecting what hardware was needed. A bit disappointed the Curt wireless controller doesn’t seat more securely in the 7- way, but the provided safety strap should keep it in place. Would definitely recommend etrailer and will use it again.
Ted
7/22/2023
Controller works perfectly when in place. I do now use zip ties to hold it securely in 7-way, which is inconvenient but manageable. Would recommend product to anyone, with that caveat.
by: Kevin 10/24/2023
2022 Subaru Outback Wagon
Love the "no-drill" installation and the fact you can only see the 2" receiver. very clean look unlike other products I see out there. Tow my ATV, boat, trailer, etc with no worries. The trailer connector was an easy plug-in to my vehicle's electrical connection. Videos made the install pretty easy
by: Frank 02/03/2024
The installer stated this was the easiest installation he has ever done.
The hitch, and the wiring worked to perfection.
Could not be happier with your product.
by: Caleb 09/09/2023
Installed pretty well, hardest part was trimming a portion of the bumper for clearance. Only thing i noticed was the hitch inside the receiver has a tad bit of room to move with a trailer being pulled causing noise from the gap. I may try wrapping the hitch with tape to take the gap up. It may be because the hitch sits low on the bumper which causes this not exactly the hitch's design...overall a good hitch system. vehicle connector works great and plugged in easily
25
2676
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended Trailer Wiring Harness for 2019 Subaru Crosstrek For your 2019 Subaru Crosstrek I highly recommend the Tekonsha T-One Vehicle Wiring Harness # 118467, which will plug right into the factory port that's either located behind the driver's-side trim panel or in the spare tire compartment in the rear cargo area. I like the Tekonsha harnesses because they use a superior converter box that's known for its durability and long lifespan. This will provide you with a fully-functional 4-Way connector to power the basic signal lights on your trailer....
view full answer... - Could 4-Way Connector of Tekonsha 4-Way for 2022 Subaru Outback be Routed Through Trunk FloorWe don't have a video that details how to run the 4-way of the # 118467 through the trunk floor as that's not how the harness was intended to be installed. To pull this off you'll need to find a grommet or hole in the truck (you may have to drill one and come up with correct side grommet) and then route the 4-way out of that.
view full answer... - T-1 Connector from 2006 Subaru Forester Not Compatible with 2010 ModelThe T-1 Wiring Harness you currently have, part # 118461 is for the 1998-2008 model years only. Unfortunately, Subaru changed the connector that the T-1 plugs into beginning with the 2009 model year. For your 2010 Forester, you would need part # 118467.
view full answer... - Tip for Finding Harness to Install Trailer Wiring on 2015 Subaru Outback WagonThanks for the tip! We normally only post questions and answers in this section but the info you gave is very helpful so we definitely want it to be accessible to our customers! "I removed the luggage tie down fitting by the wheel arch, which provided a hole to see through as well as allowing the side panel lining to spring out from the side so that I could get my hand in. Sure enough the harness plug was there secured with a small piece of blue tape. I then was able to make the connection,...
view full answer... - Finding Trailer Wiring Install Connector for 2020 Subaru Outback for Tekonsha Trailer WiringSounds like you did find it. We've heard the trailer wiring harness the 2020 Subaru Outback has for installing the # 118467 can be buried a bit and that you have to reach pretty far back to get it so based on what you described you have found it. I attached an install video link to this page that shows how we found it on a similar 2019 Outback. Here's text from a review we got from a customer detailing their experience finding the harness as well: "The only problem I had was in "finding"...
view full answer...
- Can Tow Ready Trailer Wiring Harness be Used on a 2013 Subaru Outback with a Backup CameraThe only exclusion for trailer wiring harness # 118467 is that it will not fit Sport models of the 2013 Subaru Outback Wagon. Installation of the harness should not affect the operation of the camera nor should the camera have any effect on the wiring harness. All 2013 Subaru Outbacks will have the factory connection point. Sometimes, though, Subaru likes to move it around so it may not be in the exact spot the harness instructions indicate. If it is not then other places to look or forward...
view full answer... - Plug and Play Trailer Wiring Harness for a 2013 Subaru Outback 2.5 PremiumIt sounds like the shop installed a hardwire harness with a powered converter that would require a direct connection to the vehicle battery. Harness # 118467 does not require a connection to the battery because the power wire is part of the factory wiring this harness plugs into. The wire you are talking about under the car should have been secured with loom clamps, or even zip ties. Perhaps this shop needs to take a look at the FAQ article I wrote which I have linked to the right on different...
view full answer... - 4-Way Trailer Wiring Kit Recommendation for 2018 Subaru Outback WagonThe 4-way trailer wiring kit I recommend for your 2018 Subaru Outback wagon is the Tekonsha kit part # 118467 because it installs very easily and has the most reliable converter box of all of the kits we offer. This means it will be less likely to fail and will last the longest. I attached an install video for this kit on a similar 2018 Outback as yours for you to check out as well.
view full answer...
- Recommended Vehicle Wiring Harness For 2017 Subaru OutbackFor your 2017 Subaru Outback I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 as in our experience the Tekonsha harnesses are very well built and tend to be the most durable. They are the go to for our installers any time one is available for a vehicle. I included a video of the # 118467 for you to take a look at.
view full answer... - Install Video and Instructions for Trailer Wiring in 2015 Subaru ForesterI attached a link to the install instructions for the Tekonsha trailer wiring kit part # 118467 you referenced as well as a link to an install video that shows this kit installed on a 2016 Subaru Forester similar to your 2015 model also on this page.
view full answer... - Trailer Wiring Recommendation 2018 Subaru ForesterFor your 2018 Subaru Forester the trailer wiring harness I recommend is the T-One part # 118467. The reason I recommend it for you is because of all the kits we offer the T-One harnesses have proven to us to be the most reliable option. I attached a review video for this harness for you to check out as well.
view full answer... - Trailer Wiring Recommendation for 2014 Subaru Outback WagonFor trailer wiring for your 2014 Subaru Outback Wagon the Tekonsha kit part # 118467 is the correct kit to use. Tekonsha harnesses have proven to be the most reliable from our experience so they are what we recommend the highest. I attached an install video that shows the harness installed on a 2014 Outback just like yours.
view full answer... - Trailer Wiring Recommendation for 2013 Subaru ForesterFor trailer wiring that plugs into the vehicle wiring port of your 2013 Subaru Forester we have the Tekonsha kit part # 118467 which is a confirmed fit. It comes with the 4-way connector that plugs into the trailer wiring as well. Of all the trailer wiring brands the Tekonsha kits tend to be the most reliable. Check out the install video I attached for more info as well. In the video is a 2013 Subaru Forester just like yours.
view full answer... - Do I Have all of the Components with the T-One Vehicle Wiring Harness # 118467?Thanks so much for the photos! From the part number on the converter box, you have the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 (for non-hybrid 2020 Subaru Crosstreks). From your photos and the product photos we have, you do have all of the components of the connector. With the # 118467, this harness does not include any additional like fuses/relays/etc. If you are having trouble installing the 4-way, feel free to respond to this answer with the issues...
view full answer...
- Trailer Wiring Harness Recommendation for 2014 Subaru ForesterFor trailer wiring for your 2014 Subaru Forester I recommend the Tekonsha kit part # 118467 because this brand of harness tends to be the most reliable over time when compared to other brands. Realistically you won't be blowing the fuse of this kit on a regular basis so needing easy access to it would not be as big of a deal as you would think. I would be surprised if you were to ever blow this fuse. Most likely you will install the harness and never have to worry about the fuse as that...
view full answer... - Location of Trailer Wiring Harness Connector on 2009 Subaru ForesterTo install a trailer wiring harness on your 2009 Subaru Forester, you would need to access the connector located under the cargo floor in the rear of the vehicle. Remove the cargo floor that covers the spare tire, and remove the foam tray located in the center and on the drivers side of the cargo floor. The connector is located over near the drivers side wheel well, as shown in the instructions I will link you to. I will also link you to an install video showing the trailer wiring harness...
view full answer... - Trailer Wiring Recommendation for 2017 Subaru Outback WagonFor your 2017 Subaru Outback Wagon we have trailer wiring that plugs into the connector at the rear of the vehicle like with the Tekonsha harness part # 118467 which I recommend the highest. This installs easily and has the most reliable converter box. I attached an install video for this for you to check out as well.
view full answer... - Wiring Harness for a 2022 Subaru Forester I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118467 for your 2022 Subaru Forester. This custom-fit T-One connector plugs into your vehicle's wiring harness in the spare tire compartment. It does not require any cutting or splicing of wires. It provides a 4-way flat trailer connector at the back of your Subaru to power your trailer's signal lights. I have linked an installation video and a picture.
view full answer...
- Recommended Solution for Trailer Wiring Harness for 2017 Subaru Outback Limited WagonUnless there is a factory tow package wiring plug available on the vehicle, there's not a way to add one after the fact. For that reason, I recommend using the Tekonsha T-One # 118467 to install the 4 way on your 2017 Subaru Outback Wagon; even though it will have the 4 way dangling out of your rear hatch when you're using it, it doesn't damage the harness and is the only available solution unless you were to cut a hole in the bottom of the vehicle. I've linked the installation of this...
view full answer... - No Power to Trailer Wiring Harness on a 2013 Subaru OutbackThe first thing you will want to check is the in line fuse on trailer wiring harness # 118467. If it is blown or missing that could be the root of the problem. Installing this harness can be a little tricky if the vehicle has factory backup sensors. Make sure you are plugging it in at the correct locations. I have included a picture that should help. To test the harness you will use your test light and test the wires going into the converter from the vehicle. If there is no power going...
view full answer...
- Fuse Type and Rating Supplied in TowReady T-One Vehicle Wiring Harness # 118467 for 2013 SubaruAccording to my contact at TowReady the red fuse supplied in their T-One Vehicle Wiring Harness # 118467 for the 2013 Subaru Outback Wagon is a 10-amp mini fuse commonly available at auto parts stores.
view full answer... - TRAILER LIGHTS REMAINING ON AFTER 2010 SUBARU FORESTER HAS BEEN SHUT OFF It sounds like the converter box is not stopping the power coming from the vehicle to the trailer. I suggest checking your trailer wiring on any of the trailers you have connected wiring to before you pull them again. Bad trailer wiring is typically what will cause the malfunction. A wiring problem on one of the trailers has likely caused the converter box to short out. The converter box did what it was supposed to do by preventing back feed to the vehicle wiring. The short has allowed...
view full answer... - Tips for Finding Trailer Wiring Install Harness for 2017 Subaru OutbackI attached an install video that shows the trailer wiring harness part # 118467 installed on a 2017 Subaru Outback like what you have. In it you can see exactly where to find the harness on your vehicle. There are several panels that need to come out and you will need to reach pretty far to find it in some cases.
view full answer... - Location Of Trailer Wiring Harness Connector On A 2023 Subaru Outback WagonWhen installing a trailer wiring connector on your 2023 Subaru Outback Wagon I recommend The T-One Vehicle Wiring Harness # 118467 because it has a stronger power converter box over the other wiring options for your vehicle. The harness plugs into your vehicle's wiring harness, which is located in your rear cargo area, either behind the driver's-side trim panel or in the spare tire compartment. I attached an installation video of the wiring being installed on a 2022 Subaru Outback Wagon....
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Bradley B
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video by:
Andrew K
Video by:
Andrew L
Video by:
Alan C
Video by:
Jonathan Y
Video by:
Michael B
Video by:
Thomas T
Video by:
Ethan H
Video by:
Cooper S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chris
5/30/2023
It’s been a year now and it still works like a charm with NO issues