Part Numbers: RP30075,RP30035
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Non-binding, round-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately.
Features:
Specs:
Note: This fifth-wheel trailer hitch will not fit pickups with beds shorter than 6'. It also will not fit trucks with flareside/stepside bed. A minimum 13" extended trailer pin box is recommended. If using a slider, hitch will not adjust to lowest height setting.
Unlike the more economical slide-bar models, the rounded, 2-piece jaw on this fifth-wheel trailer hitch inhibits rattle and movement by securely wrapping around your trailer's king pin, resulting in easier hookup and a safer, quieter ride.
Most often used on trucks with 6' beds, this roller helps to eliminate clearance problems during slow-speed turns. When you are towing a fifth-wheel trailer, your hitch must be situated on the cab side of your truck's rear axle. However, at slow speeds you can use a roller to slide the fifth-wheel hitch (and the trailer) toward your truck's tailgate and past the rear axle, creating enough space between the cab of your truck and the trailer to permit less-restricted turning.
California residents: click here
Install your fifth-wheel trailer hitch with this universal, 10-bolt kit. Rails, brackets and hardware included. Rails mount on top of truck bed floor. Not for use on Reese Elite Series (or Signature Series) models.
Features:
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (581 Customer Reviews)
Fifth-wheel trailer hitch provides excellent jaw-to-king-pin contact with a 2-jaw latching system. Non-binding, round-tube slider helps to eliminate clearance concerns during slow-speed turns. Rails and installation kit sold separately. Install your fifth-wheel trailer hitch with this universal, 10-bolt kit. Rails, brackets and hardware included. Rails mount on top of truck bed floor. Not for use on Reese Elite Series (or Signature Series) models.Was looking for a bolt on kit for bare frame rails for a hotshot truck. These require support in the middle (at least one center bolt in each rail). Ended up having a fabricator weld a plate for support and mount the rails to that. But I guess that's reasonable for a universal kit.
This hitch has a feature or two we didn't even expect. It was an easy install and is performing great. Plenty of maneuverability and rock stable. etrailer's service was incredible and stayed on top of the delivery until we got it. We thought they went the second mile to make sure we got our hitch.
This Universal Rail Kit installed with relative ease and the included instructions were clear and easy to follow.
Best value for the money! I have used this hitch for a season now and I must say, it's worked out great. I use a Teflon plate with it and this hitch doesn't have much play in it going down the road. I have not had any issues with it sliding when locked.
I am very impressed with the fit and finish. Packaging from etrailer.com was inadequate. UPS man unloaded the package, rang the doorbell and drove away before I got outside. There was a lock washer laying on the ground and a bracket was hanging out of the box. We opened the package and inventoried everything, and to my amazement everything was there. Ordering process was very easy and my order shipped quickly. While on my lunch break at work I added 6 items to my cart and printed it so I could complete the order when I got home. About 4 hours later 3 of the 6 items increased in price. This hitch increased in price by $2, not a big deal I guess. I was able to find this item about $12 cheaper at another retailer and I provided this information to etrailer.com. Within a few hours they refunded me 110% of the difference. I am installing this on a 2002 Dodge Ram 1500 short bed and the instructions are lacking. Maybe a professional installer who has done this many times would not have any problems, but the instructions leave some things to your imagination.
Jeff L.
1/29/2018
Working great after one year of use. Use it to tow a 30 gooseneck trailer and it has worked as advertised. I bought a used 5th wheel hitch and although I have never used it, it fits perfectly in the rail system.
Worked perfect used with airlift AL57298. Didn’t see any picture of universal rails and air bag kit working togther.
Good product everything fit as it should.good instructions. Good value and free shipping
Received yesterday, well packaged will know more when I get it on truck
The kit arrived very quickly, in fact shipping was moved from "5 to 7 days" to "3 to 5 days"and arrived in 5 day. During Christmas rush this was great, and really appreciated. I ask a technician friend to install it for me. It went together very nicely.
I am rating this as EXCELLENT, do to the ease of installation an the escallation of the shipping arrangement. Thank You for a great product and great service.
LGK
satisfied customer
Larry K.
1/3/2015
Working great! No problems at all. Rating is still Excellent.
Installed these rails with the short bed Reese bracket kit for 2015 or newer f150. Installation went well. Instructions were pretty straight forward but measurements from end of bed were not quite right and put the rails too far forward of the underbed brackets by about 2". I actually measured off the cross rails under the bed of the truck after I had installed the brackets.
Helpful hint: after getting a hole drilled on either side of the front rail to secure it to brackets under bed, put the hitch on both rails which will line up the rear rail exactly right then drill the rest of your mounting holes.
The included spacers are not quite thick enough and have come out from between the rails and bottom of the bed a few times even after I tightened bolts so much, bed started to bend. Have to find some other Shem's to make it tight enough.
I would recommend these rails eventhough it took a little bit to get them in the right location.
PS - Be very careful when drilling holes on driver side as you are right over the gas tank.
I sent an email and was very pleased to get a response the next day, It was a universal kit RP30035, I had to make spacers for 3 of the frame brackets, the gaps were all over the map no matter how much I squared it up, all in all I'm pleased.
Greg
6/5/2022
couldnt be more pleased, they were very helpful.
Worked perfectly for my application, installation was easy and it has worked with no issues.
GREAT GREAT GREAT EXPERIENCE AND EVERYTHING THAT GOES WITH THIS WEB SITE.....PRODUCT TO PRICING TO SERVICE.....
I've had this system installed in my 1996 Ford F150 for a year now. I did the installation myself and found it to be relatively easy. I had to remove the rear tires to give better access to the frame, but after I did that drilling the needed holes and bolting in the brackets was straight foward. I use these rails with a gooseneck plate and have had no trouble pulling anything yet.
Original package was damaged by UPS somewhere during transport and delivery. etrailer made it very easy to get the missing part (smaller mounting bracket fell out of box somewhere) and instead of just sending the one part they re sent the bolt kit, all four mounting brackets, and a new pull cord. So basically the entire assembly other than the base rails. Could’nt be happier and will post pictures as soon as it’s installed
I installed this kit in my 2006 Silverado 2500HD to hold a Reese 16k sliding hitch. The kit is very well built and had more parts than required to complete the installation. Once installed, works great and am very pleased!
The work itself is cumbersome and a couple things to be aware of. First, I squared and centered the rails as required. Before I drilled in the bed, I set the hitch in the rails and they moved slightly and had to recenter. This only tops a few minutes but I recommend setting the hitch in the rails before drilling. Second, the alignment for the front chassis brackets was challenging. You have to drill the bottom two bolt holes to ensure you can get a wrench in the nuts as the frame is enclosed there and reaching around the tank and brake lines. The instructions were not specific as to which holes to drill.
We received are parts and they were exactly what we order. Will recommend etrailers to friends. Already recommended them to family
Excellent quality products from Reese along with great service and pricing from e-trailer. I did run into some availability issues from the manufacturer with my initial order but Kelsey informed me quickly so we could modify my order. My order was shipped very promptly as promised. Thank you Kelsey for the amazing customer service!
Great 5th wheel trailer hitch product. Great customer service.
Installation went as printed, took two of us 4 hrs. instead of 2, but I am a perfection freak, centered within 1/32" . Have not used it yet, but will be shortly. Installed to specs provided. Will purchase next hitch from etrailer, Did not call for help, but good to know they were there if needed.
purchased just the rails for 5th wheel receiver as we bought a used camper and the Reese Easy Loader came with it but owner did not want to remove rails from their truck. Technician was excellent in helping with installation and emailed us directions specific to my truck. Shipping was quick and install went well. We had room to use 12 bolts vs 10 so we did. We did install 1" forward in bed as we had room to do it. Better more forward when hauling. The knurled bolts were too short for our truck bed and we called and let them know. We had our own that were longer so no delay in install.
Cindy B.
8/14/2017
Fantastic!! In fact we just removed the hitch for the first time and rails are no issue in truck bed. Easy ineasy out after rails installed.
once i finally got the bottom platform to fit it went together quite well. It is really heavy for a 74 year old to wrestle around but i have a 40 year old son to help. Have never had to slide it back to back the fifth wheel up but have not had any close quarters to deal with. I would imagine that one of these made out of aluminum would be really expensive and probably not as strong.
My fifth wheel hitch kit was easy to install and has worked great!! I tow my camper around the Upper Peninsula of Michigan while fishing Lake Superior and Lake Michigan and I have no worries about my fifth wheel hitch doing its job and getting my camper where I need it! Thank you for a great product that allows me to spend more time on the water!
M G.
6/15/2018
The Reese Fifth Wheel Installation Kit that I purchased has been great. I have had no issue with it and it does everything I need it to do. Great Product!
Product is as it was described. Straight forward installation. Only problem I had was minor shipping damage. The ear of the 5th wheel plate was bent from it being dropped I would guess. Better packaging would've solved this...
I installed the kit on a 1997 Dodge 2500. Everything worked exactly as the instructions indicated for my model. I had an existing gooseneck hitch installed, so I needed to make a few modifications to install this kit, but everything worked great.
Dave W.
8/5/2016
The fifth wheel rails have worked great!
Ask the Experts about this Fifth Wheel Hitch
Do you have a question about this Fifth Wheel Hitch?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Karl B.
12/23/2013
Where can I get instructions on how to install the rp30035 on my 2008 chevy Silverado one ton dually, 8 foot bed.