Expert Review Video:
Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
350 Pound Tongue Weight
3500 Pound Towing
Weight Distribution Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Trailer Wiring:
Features:
...rust resistance Sturdy, square-tube design Ball mount, pin and clip sold separately Made in the USA Mounting hardware may be imported Specs: Receiver opening: 2" x 2" Rating: Class III Maximum...
Installation Notes:
No drilling required for installation
Access holes may need to be enlarged by drilling, filing, or rotary tool
Exhaust must be temporarily lowered for installation
Heat shield must be modified or trimmed for hitch installation
Tech Tip:
Hands-free Liftgate sensor areas will be limited to either side of vehicle near exhaust pipes. Hitch does not fit vehicles with factory hitch.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
525 Pound Tongue Weight
3500 Pound Towing
Weight Distribution Towing Capacity:
525 Pound Tongue Weight
5000 Pound Towing
Trailer Wiring:
Features:
...separately) Sturdy, square-tube design Ball mount, pin and clip sold separately Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight : 3,500 lbs Maximum GTW when used...
Installation Notes:
No drilling required for installation
Access holes may need to be enlarged by drilling, filing, or rotary tool
Exhaust must be temporarily lowered for installation
Heat shield must be modified or trimmed for hitch installation
Tech Tip:
Hands-free Liftgate option will work with this hitch.
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
350 Pound Tongue Weight
3500 Pound Towing
Weight Distribution Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Trailer Wiring:
Features:
...Ball mount, pin and clip sold separately Hitch assembled in the USA Mounting hardware may be imported Specs: Receiver opening: 2" x 2" Rating: Class III Maximum gross trailer weight : 3,500 lbs...
Installation Notes:
No drilling required for installation
Access holes may need to be enlarged by drilling, filing, or rotary tool
Exhaust must be temporarily lowered for installation
Heat shield must be modified or trimmed for hitch installation
Tech Tip:
Hands-free Liftgate sensor areas will be limited to either side of vehicle near exhaust pipes. Hitch does not fit vehicles with factory hitch.
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...From what I could find it looks like your 122R (red) and 122Y (amber) lights measure…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I&…
view full answer...Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…
view full answer...Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846.…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...Filter Products (6)
Contact and Help
What our customers are saying:
My Hitch was delivered very quickly. I was surprised to see it so soon. When i installed in on my car, it couldnt have been easier. It is a one person job. Took me about 20 minutes, and it was all together. Thanks for a great product, and great customer service. I will be doing business with you again in the future!
Kevin
Elizabethtown, KY