I do have an option for you but the Curt Trailer Hitch Receiver part #13390 on your 2015 Subaru Legacy already has the highest ground clearance (10-1/4") of any other trailer hitch receiver we have confirmed to fit your vehicle.…

For your 30 foot 5th wheel I really like the frame mount skid wheels that can swivel. For that the Ultra Fab kit part #UF48-979011 would be your best option. I attached a picture that shows these attached to a trailer frame as well. These…

The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, #UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, #UF48-979013, 7-3/4 inches. I have attached a photo for you showing these…

I do have an option for you. Due to the length of your 5th wheel and size of your bumper, we do not have a bolt-on option available. That being said, you can use the Ultra-Fab Steel Jumbo Roller for Trailers and RVs #UF48-979023 which is a weld-on…

We do not have the CAD drawings or blueprints for the Ultra-Fab Steel Roller, part #UF48-979020, but I have attached a photo of the roller with dimensions shown. The mounting bracket measures 1-1/4 inches from the center of the hitch pin hole to…

I certainly do. For this you are going to want to install skid wheels which will take some of the brunt off your trailer. For this I recommend using the Ultra-Fab Steel Jumbo Roller part #UF48-979023. These skid wheels will need to be welded on the…

From the sounds of your situation the Ultra-Fab Skid Wheels #UF48-979014 seem to be a great solution. Sure beats damaging your driveway. These are designed to attach to 2-1/2 inch square hitch tube on the motorhome. If you don't have this…

The Roadmaster Rollaway Trailer Hitch Protector #RM-050 will likely work with your trailer hitch that has the tabs on the bottom of the receiver as there does not look like there is going to be any interference. So long as the tabs are completely…

Adding skid wheels to your open car trailer is indeed what I recommend to help prevent the trailer from dragging when going up a steep driveway. These are designed specifically for this very purpose and will work well. I recommend taking a look at…

The current Torklift tie down part #TLD3101 that you have installed on your 1997 Dodge Ram 3500 only fits if you have the factory hitch. If you go with the SuperHitch part #TLD1100 you would need to change your rear tie down to the part #TLR3503.

I went out into our warehouse and pulled a set of the Ultra-Fab Rotating, Hitch Mounted Skid Wheels #UF48-979014 and found that the distance from the bottom of the wheel to where the bottom plate will be is 5-3/4 inches. Since the bumper you plan…

We do have a trailer hitch receiver that fits your 2024 Nissan Pathfinder, from Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C46DR