Thanks for the picture! For your 2023 GMC Sierra 1500 with adaptive ride control you'll want the Air Lift LoadLifter 5000 Air Helper Springs item #AL57388. This air bags have a 5,000 lbs load leveling capacity that will…

The Firestone In-Cab Pressure Gauge #F2196 will work with the AirLift systems. If you can tell me the part number of which AirLift kit you have I can try and help you with that system if you'd like.

Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the #14125A outer and #25580 inner bearing found in the Timken #TMK92VR.…

The vast majority of trailers on the market use a standard coupler (installed on top of the trailer frame) which is compatible with the B&W Continuum Weight Distribution System w/ Sway Control #BW28FR. Underslung…

Thanks for reaching out, Randy! It sounds like you're looking for something like the In-Cab Air Pressure Monitoring Gauge #F2196 which is a generic kit that can tie-in on the output side of your tank. Any gauge that…

The socket needed for the Fastway e2 is the 1-7/8" 12pt Thin Walled Socket #ALL643216.

Hey Isaac! While we don't have one specific all in one kit we do have every component you will need to update your trailer's lighting and brakes. I recommend using the Trailer Wiring Kit item…

Both the Air Lift LoadLifter 5000 Air Helper Springs #AL57234 and Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88234 are a fit for your 2019 Ford Ranger, and the difference between the two is really only what…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150…

I would be happy to! Weight distribution systems are selected based off of tongue weight which is typically between 10% - 15% of your trailer's total weight. This would put yours between 250 lbs - 375 lbs.…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

Yep! The 1-7/8" 12pt Thin Walled Socket #ALL643216 does work with the e2 Fastway round bar weight distribution systems. This socket costs considerably less than the Equal-i-zer socket and works just as well so…