Powerbuilt Tools - Vehicle Tools - ALL643216 Review Video

When installing the head unit of your Equal-i-zer weight distribution system such as #EQ37101ET to your Equal-i-zer shank #EQ90-02-4900 you will need to use the bottom two holes to mount the shank. I have added a cutout of the installation…

Yes, you can swap the 2" hitch ball #HT33853 on your 6K Husky Center Line Weight Distribution #HT32215 with the 2-5/16" hitch ball #HT39386 since your newer trailer has a larger coupler size. You just need a 1-7/8" socket…

The Tow Ready 2 inch Hitch Ball #19258 includes a 1-1/8 inch nut. I just went out to our warehouse to check. It sounds like it'll work great for you.

We can get your 2022 Forest River R-Pod RP-193 set up with a weight distribution hitch with sway control, and while we don't offer the Recurve, we do have an option that is better, from Fastway: - Fastway e2 Weight Distribution w/ 2-Point…

The socket needed for the Fastway e2 is the 1-7/8" 12pt Thin Walled Socket #ALL643216.

To replace the Extend/Retract Switch for Lippert Electric Trailer Jack #LC49MD you'll just need to keep track of how the original was hooked up and replicate that. Unfortunately Lippert doesn't have a wiring diagram but we do have a photo we…

For a large socket that will fit the 1-7/8 inch nut on ball #19286 you can use #EQ70-00-4800.

Part #EQ70-00-4800 is a 1-7/8 inch socket with an outer diameter of around 2-3/8 inches.

The Replacement Head for Husky Weight Distribution Systems part #HT31516 does not come with a hitch ball or sway control ball but you can add them using part #HT39386 for hitch ball and part #C40093 for the sway control ball. We also have replacement…

The distance from the top of the pin hole to the bottom of the steel plate for the Stake Pocket Tie-Down Anchors part #PK-SPTD is 1-3/4" which you can see in the attached photo.

Yep! The 1-7/8" 12pt Thin Walled Socket #ALL643216 does work with the e2 Fastway round bar weight distribution systems. This socket costs considerably less than the Equal-i-zer socket and works just as well so it's what we normally…

Based on the pictures you attached (thank you!) it looks like you have the Equal-i-zer Weight Distribution Shank #EQ90-02-4100 that allows for a drop of up to 3 inches from the top of the hitch receiver opening. The adjustment portion of the shank…