Review of Redline Gooseneck Trailer Coupler - Coupler Head - 291300 Video

I spoke with my contact at Redline and he informed me that the height of this Gooseneck Coupler Head, #291300, is 2-7/8 inches, the flange is 4-7/8 inches, and the thickness of the lip flange is 3/8 of an inch. Check out the picture I put together…

The Bulldog Gooseneck Coupler Head Repair Kit #BD1542S01 is specifically for the #BDGN240200 coupler head. This is the Bulldog GN24 which is the same as the Fulton GN24.

On a 7-Way connector the suggested minimum wire gauge for the White (ground) wire, the Red or Black (power) wire, and the Blue (brake power) wire is 12 gauge. The minimum wire gauge for the remaining Green (right turn/brake) wire, the Yellow (left…

While I was unable to confirm who manufacturers the Defender 2 brake away system on your 2021 Big Tex 60EC. I do agree that the Bright Way Push-to-Test Trailer Breakaway Kit #3802346 does look identical minus the decal and they have the same wiring…

The Bulldog Coupler Repair Kit BD0287740300 is designed for a round coupler so if you have a square tube you'll have better luck with the Gooseneck Coupler Head Kit #GC-HEAD. This is designed around etrailer and RAM round and square gooseneck…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

A goose neck hitch ball, or the center of a 5th wheel hitch head for that matter, will be located either right over the rear axle or an inch or so forward of it. You do not want a goose neck hitch ball to be located behind the rear axle since this…

There are differences in them but we do have what you are looking for and they can in some situations be used together. The Replacement Trailer Hub Bearing you have part #02475 and Replacement Race for 02475 Bearing part #02420 are designed to work…

TruRyde spindles, like #TRU57FR are made of automotive quality high strength steel.

The shaft of the B&W Turnoverball Adapter, #BWGNXA4025, measures 4-1/4 inches long from the base and it is 2-1/2 inches by 2-1/2 inches square. This adapter was specifically designed to fit in a B&W Turnoverball gooseneck trailer hitch.

I do have a solution for you. But first, the Bulldog Gooseneck Coupler Repair Kit #BD0287740300 is designed to fit certain model Bulldog couplers all of which have 4 inch diameter tubes. I spoke with my contact at Bulldog to determine if a 3-1/2 inch…

According to the manufacturer the Gooseneck Coupler Head Kit #GC-HEAD is made from mild cast steel.