Filter Products
Filter by Coupler Size Compatibility
$112.28 - $112.28
Videos
for Flat Mount Trailer Coupler
Help Articles
for Flat Mount Trailer Coupler
Expert Answers
for Flat Mount Trailer Coupler
The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram.
view full answer...Yes, the Timbken bearings part #TMK73VR and #TMK23VR are made in the USA.
view full answer...The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…
view full answer...I called Cequent, the manufacturer, and have an answer for you regarding the Bulldog Cast Head Coupler with Wedge Latch - 2-5/16 inch Ball - Flat Plate Mount - 20,000 pounds, #BD4420000317. The bolt holes are 5/8 inches. This Coupler can also be…
view full answer...You would be able to go to the larger tire size of 235/75R17.5 like the part #P35175 to replace what you have and you would have additional weight capacity which could help with the blow outs you are having. You did mention all of the usual suspects…
view full answer...That is not normal wear for the L-Brackets on your Blue 2-Point #BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and…
view full answer...I don't have the length of the spring bar arms on the Blue Ox 2-Point Weight Distribution System like part #BLU75FR but I can tell you that the frame brackets will need to be installed between 25-27" back on the frame from the center of the…
view full answer...To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…
view full answer...In order to use 17.5" diameter trailer wheels you'll need to upgrade to 9/16" lug studs. There are no other options as all wheels this size use this size or larger since they are designed for more weight. In order to do this you'll…
view full answer...For the Demco Trailer Coupler - Flat Plate Mount #DM99VR, I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers #FA86-0015-318. This lock comes with a universal design and includes 2 keys.
view full answer...In order to remove the hub/drum on your trailer you will want to first remove the spindle nut. Once the spindle nut is removed you are going to want to take a hammer and tap the outer portion of the drum as well as the hub face a few times to break…
view full answer...There is no specific torque rating when reinstalling the castle nut after packing the bearings. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can…
view full answer...