Review of Demco Flat Mount Trailer Coupler - Fixed Coupler - DM69FR Video

You would be able to go to the larger tire size of 235/75R17.5 like the part #P35175 to replace what you have and you would have additional weight capacity which could help with the blow outs you are having. You did mention all of the usual…

It sounds like you are trying to pair the Curt Echo part #C51180 to the Bluetooth on your phone which is why the app is not recognizing it. You want to go into your settings on your phone and make sure you disconnect the Bluetooth from the Curt…

The Curt Channel-Mount Coupler part #C25328 is designed to be used with an adjustable channel such as the Curt 3-Position Adjustable Channel Bracket part #C48610 which has an inside width of 3". Therefore, the width of the but end on the…

There are a couple of handles that you can use for your Fulton T1801 winch. For a 9 inch long handle use #F501109. For an 11 inch handle use #F501101. The longer the handle the easier it is to crank.

The hole in the handle is slotted, and is meant to replace the handle on a Dutton-Lainson DL1400 or DL1402 winch. The proper replacement for your Fulton T1801 winch would be the Fulton Replacement Winch Handle, part #F501109 or #F501110 depending on…

For the Demco Trailer Coupler - Flat Plate Mount #DM99VR, I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers #FA86-0015-318. This lock comes with a universal design and includes 2 keys.

Correct, there will need to be a small amount of wiggle room or play between the trailer coupler and hitch ball which is to allow the trailer to track and turn smoothly. If the connection point between the trailer coupler and hitch ball was too tight…

The etrailer A-Frame Trailer Coupler w/ Round Jack Hole #CA-5280-RB uses the standard a-frame angle of 50 degrees. The length from the rear of the coupler to where the coupler meets its narrowest point is approximately 9" long. I have include…

Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…

I spoke with my contact at Dutton-Lainson, the manufacturer, about the hardware requirements for Coupler #DL13728. She told me that to mount the coupler, you will need two, 1/2 inch bolts, that are 3-1/2 to 3-3/4 inches long. With this type of…

I went out to the warehouse and pulled a Bulldog trailer coupler, #BD4425000317, to determine what the best lock for it would be. The best option would be a simple latch lock like #2847DAT. This will prevent the latch from opening. I have included a…

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…