Filter Products
Filter by Coupler Size Compatibility
$119.20 - $119.20
Videos
for Flat Mount Trailer Coupler
Help Articles
for Flat Mount Trailer Coupler
Expert Answers
for Flat Mount Trailer Coupler
EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…
view full answer...The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…
view full answer...I called Cequent, the manufacturer, and have an answer for you regarding the Bulldog Cast Head Coupler with Wedge Latch - 2-5/16 inch Ball - Flat Plate Mount - 20,000 pounds, #BD4420000317. The bolt holes are 5/8 inches. This Coupler can also be…
view full answer...You would be able to go to the larger tire size of 235/75R17.5 like the part #P35175 to replace what you have and you would have additional weight capacity which could help with the blow outs you are having. You did mention all of the usual suspects…
view full answer...That is not normal wear for the L-Brackets on your Blue 2-Point #BLU75FR to be that worn. It looks like you have too much angle in the head, so I recommend trying to tilt the L-brackets a little to try and get the bar less on just that one edge, and…
view full answer...I don't have the length of the spring bar arms on the Blue Ox 2-Point Weight Distribution System like part #BLU75FR but I can tell you that the frame brackets will need to be installed between 25-27" back on the frame from the center of the…
view full answer...The big things we are looking for on the label are the weight capacity, hub face (HF) length, and the spring center (SC) distance. Your axle is a 4,400 lb 85" HF and 68-1/2" CS Dexter axle. I will tell you up front that we do not carry a…
view full answer...I reached out to Timbren and they do not recommend using the Timbren Axle-Less Trailer Suspension System #TASR7KS01 for triple axle applications because of weight balancing. Although ideally it would work if the load was perfectly balanced, there are…
view full answer...Yes, for 5,200 standard trailer axles we have the hub part #8-219-4UC3-EZ which is a fit for 5,200 lb axles and has the bolt pattern of 8 on 6-1/2 inches like you said you need.
view full answer...The Demco Trailer Coupler - Flat Plate Mount - eZ-Latch - Black - 2-5/16" Ball - 21,000 lbs #DM69FR has a max tongue weight rating of 5-10% of the GVWR of the trailer, so since it is rated for up to 21000lbs the tongue weight rating would be up…
view full answer...To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…
view full answer...The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a picture below…
view full answer...