Videos
for E-Track
Help Articles
for E-Track
Expert Answers
for E-Track
The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.
view full answer...Hey Frank, each of the tracks that come with the CargoSmart X-Track Cargo Organizer Pro Bundle - Matte Black - Steel - 667 lbs - 5foot Long #3481788-P are 5 foot long. How to install it will depend on the application. Wood screws through studs…
view full answer...With plywood walls that are as thin as yours, it's possible that they may not support what you are looking to do. The only way you will be able to utilize the Erickson Horizontal E-Track #EM59150 (2 feet) or #E19148…
view full answer...I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck…
view full answer...There may be a solution for you though the Traffic Cone Holder for E-Track or Rack'em Spare Tire Holder #RA-26 does not have a specific weight rating for one of the brackets. There are a couple options for you to…
view full answer...We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are…
view full answer...Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.
view full answer...If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…
view full answer...You can absolutely install E-Tracks like the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4 #e42VR you were looking at in your Forest River Enclosed Cargo Trailer yourself. Now…
view full answer...In order to achieve the full capacity of the ratchet straps and the track, the direction of the pull should be parallel to the direction that the e track is running. How much the capacity would be diminished by pulling 90 degrees to the side will…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...Self tappers like the part #SL99FR would work great as they have drill bits on the end which would make it through the metal of your studs and then attach.
view full answer...