Optimal Direction of Pull When Using E Track
Question:
When useing E trac does it matter which direction tie down straps pull when mounted on floor. Should pull be the direction that trac runs or can pull be up to 90 degrees.
asked by: Nick H
Expert Reply:
In order to achieve the full capacity of the ratchet straps and the track, the direction of the pull should be parallel to the direction that the e track is running.
How much the capacity would be diminished by pulling 90 degrees to the side will depend on the weight of the load. If the load is close to the capacity of the straps, pulling out 90 degrees could damage the clip that locks the strap into the track or possibly damage the track itself.
You may also be interested in purchasing a E-Track 2 inch D-Ring, part # E59143.
I attached a link to a review video of this product to the right for you to check out also.
Products Referenced in This Question
Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs
- E-Track
- E-Track Anchor
- 1200 lbs
- Erickson
more information >
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Search Results: etrack
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4
- Shop: Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Shop: CargoSmart Rope Ring for E Track or X Track - 2,000 lbs
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long
- Video: etrailer Horizontal E-Track Review
- Shop: etrailer Horizontal E Track - Galvanized Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: Snap-Loc E-Track Wood Screws - Qty 20
- Search Results: x track
- Search Results: e track rails
- Search Results: e65vr
- Video: Customer Interaction with the Erickson Adjustable Wheel Net
- Video: Erickson E-Track E-Chock Wheel Chocks Review
- Shop: Gooseneck Hitch
- Search Results: gooseneck hitch
- Video: Review of Gen-Y Hitch Trailer Hitch Ball - Gooseneck Hitch GM Short Bed OEM 5 Inch Offset - GY55XR
- Video: Gen-Y Spartan Shock Absorbing Gooseneck Coupler Review
- Video: B and W Four Inch Offset Gooseneck Hitch Ball Review - 2021 Ram 2500
- Video: Review of etrailer E Track - E-Track Rails 4 Pack - e42VR
- Search Results: sway control ball plate
- Q&A: Horizontal or Vertical E-Track for the Floor of an Enclosed Trailer
- Search Results: e track anchor
- Q&A: Best Direction To Attach Load When Using E-Track Cargo Control System
- Q&A: What Screws do You Recommend to Use with the CargoSmart X-Track Cargo Organizer?
- Q&A: How to Connect Backup Lights When Trailer Isn't Wired For Backup
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: Are the Erickson Horizontal E-Tracks Strong Enough for a 5,000 lb Vehicle
- Q&A: Can Wheel Nets or Wheel Straps be Used With Wheel Chocks on E-Track
- Shop: Suspension Enhancement