I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading,…

We have some confusing pictures on our site for the Gen-Y Aluminum Loading Ramps part #GH34FR and I apologize for that. The actual ramp has a slot mount style on one end and a tapered end on the other which you can use either end depending on what…

I was able to verify that the weight capacity for the Aluminum Car Hauler Ramp Set #288-07503 that you referenced is indeed 6,000 pounds (not kilograms) for the pair and 3,000 pounds per panel. The recommended maximum height of 16 inches is simply…

No, I am sorry we do not. The only ramps we have available are ones like Item #288-07503 that are detachable. We do not manufacturer them either.

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The hook portion of the Gen-Y Hitch Aluminum Loading Ramp Set #325-GH-R84 that gets set on to the rear of the trailer is 14 inches in width. The depth of the hook, or how wide the opening of it is 2 inches.

For your 3,000-pound compact John Deere tractor, I recommend the Gen-Y Hitch Aluminum Loading Ramp Set - 84" Long x 14" Wide - 6,000 lbs #325-GH-R84. Not only does this set provide you with 6,000 pound of maximum weight capacity, it also…

I do have a solution for you, but the Aluminum Car Hauler Ramp Set #288-07503 that you referenced has a max height of 16" for loading equipment. I did speak with my contact at Gen-Y Hitch who said that their aluminum loading ramps don't have…

I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as it could cause the ramp to not be secure and will be a pretty…

The shock absorption from the Gen-Y Torsion 2-Ball Mount #325-GH-1324 will help cushion abuse on your trailer tongue and the tow vehicle. However, you need to make sure you have enough tongue weight for this to be effective. The optimal ride tongue…

If you are only putting brakes like the #TRU36FR on one axle, we recommend doing the front axle for a few reasons. First, the front axle technically will bear more weight than the rear. Most trailers it would be about 60% on the front axle and 40% of…