Filter Results
$133.95 - $133.95
$133.95 - $133.95
$133.95 - $133.95
$133.95 - $133.95
Videos
for Backpacks
Help Articles
for Backpacks
Expert Answers
for Backpacks
I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…
view full answer...Unfortunately, Atwood no longer has the repair kits available. They were bought out and the company that now owns them stopped producing the repair parts you need. I recommend the A-Frame Trailer Coupler - Yoke Latch #CA-5210-B for your replacement…
view full answer...Most A-Frame Trailer Couplers have a standard of 50 degrees. I produced a short video for you showing the angle of the etrailer A-Frame Coupler, part #CA5400. I have also linked an FAQ on trailer couplers.
view full answer...Thanks for all the detailed information! Given the taller height of your 2019 Chevy Silverado 2500, I recommend the 10" rise or 6" drop Equal-i-zer Weight Dist Shank item #EQ90-02-4900 you were looking at. I…
view full answer...For your 1993 Ford E350 Van the only style of trailer wiring we have is the kind that installs inline with the vehicle taillights like the T-One kit part #118343. With this kit you'd unplug your vehicle taillight connectors and plug…
view full answer...The hub you have is a 3,500 lb idler hub that has a 5 on 5 inch bolt pattern so you'd want the part #AKIHUB-550-35-K and you'd be set! This comes with bearings, lug nuts, a grease seal, and a grease cap/dust cover. Or,…
view full answer...I did a little digging on your grease seal number and it looks like the 16074-224 has an inner diameter of 1.5 inches and an outer diameter of 1.987 so the correct part number you would need is the #10-9.
view full answer...The correct tire chain adjusters for 12x16.5 Skid Steer Tires will be the Titan Chain Multi-Arm Rubber Tire Chain Adjusters part #TCMA2. These fit 14" - 24" diameter wheels so the 16.5" wheels you…
view full answer...You are correct that the bike racks we offer are designed to work with hitch receivers that have either 1-1/4 or 2 inch openings. I spoke with one of our other Experts who said a hitch that had a 1/2 dimension was used several years ago on some…
view full answer...When installing the etrailer #e98844 on your 2020 Toyota Highlander, you'll need to scrape the undercoat so that the mounting flange of the hitch and the vehicle's frame member are in direct metal-to-metal contact. If…
view full answer...I spoke with LockRack and they said the bolt for the Universal Crossbar Adapter for Lockrack Watersport Carrier #LR53FR measures 1-3/8" long and takes a 3/16 or 5 mm hex key.
view full answer...The issue is that the Roadmaster converter #RM-732 is designed for going the opposite direction that you are wanting. This is designed to take a separate system and combine the circuits and you are wanting to take a combined circuit and separate…
view full answer...