Filter Products
Filter Results
$149.20 - $251.17
$119.08 - $285.96
Filter by Mounting Location
$149.20 - $251.17
$119.08 - $285.96
Videos
for Backpack Blower Racks
Help Articles
for Backpack Blower Racks
Expert Answers
for Backpack Blower Racks
The Lockable Blower Rack for Utility Trailers #RA-19 is 39-1/2 inches tall and 13-1/2 inches wide. The 12 inch mesh sides will not support this rack, so you will need further bracing to your trailer like a rail to give you the stability needed to…
view full answer...For just a single blower pack rack you would want the part #RA-4. The Rack Em Backpack Blower Rack measures 41-3/8 inches tall, and 19-3/8 inches wide. Measuring from the top of the rack downward, the mounting holes are at 7-1/2, 17-3/8, 27-1/4 and…
view full answer...We definitely have something! For your Stihl blower, I recommend the Rack'Em Storage Rack for Enclosed Trailers - Adjustable #RA-39 along with the Utility Trailer Tower Kit for Pack'Em Ladder Rack or Rack'Em Blower Rack…
view full answer...I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…
view full answer...You have a Lippert 3500 lb axle with 10 inch brake assemblies/hub drums. We can't order custom axles, but we do offer a Dexter #7359765-EB off-the-shelf axle that's very similar, the only difference is that the leaf spring seat center…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.
view full answer...The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work…
view full answer...For your Sure Trac ST9614 HLODOD-B-140 trailer I recommend adding the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 #UF48-979002. I believe these will work well to stabilize your trailer for loading. They can be adjusted using…
view full answer...The #UF48-979002 feature oversized footplates that are 4-1/2" wide by 9" long, so you could use them without leveling blocks. However, it's not uncommon for people to use leveling blocks like #A10-0918 or even wooden blocks under these…
view full answer...To ensure that your spindle is not sticking out of your hub farther than it should, I would recommend verifying that all of your bearings and seals are seated correctly and the hub is tightened down correctly. When tightening the hub to the spindle,…
view full answer...I do have a solution for you, however the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers #63080 is specifically designed to work with Draw-Tite 2" x 2" trailer hitch receivers. Because the collars on the hitch…
view full answer...