Videos
for Backpack Blower Racks
Help Articles
for Backpack Blower Racks
Expert Answers
for Backpack Blower Racks
The Lockable Blower Rack for Utility Trailers #RA-19 is 39-1/2 inches tall and 13-1/2 inches wide. The 12 inch mesh sides will not support this rack, so you will need further bracing to your trailer like a rail to give you the stability needed to…
view full answer...The Rack'em Lockable Blower Rack for Utility Trailers part #RA-19 is designed to be installed on an open trailer. The photo you have attached looks very similar to that of an open trailer so I see no issues. I recommend using one bolt to…
view full answer...We definitely have something! For your Stihl blower, I recommend the Rack'Em Storage Rack for Enclosed Trailers - Adjustable #RA-39 along with the Utility Trailer Tower Kit for Pack'Em Ladder Rack or Rack'Em Blower Rack…
view full answer...I reached out to my contact at Dexter Axle who said that your axle is rated for 3,500 lbs and it uses inner bearing #L68149, outer bearing #L44649, and the grease seal #58846. All of these can be found in the kit #BK2-100 if you are needing to…
view full answer...Two Door Latches that I would recommend are the same thing, just in two different colors. TheGlobal Link RV Entry Door Locking Latch Kit comes in Polished Chrome #295-000002 and black #295-000019. The Dimensions are 3.47 inches wide x 4.28 inches…
view full answer...You have a Lippert 3500 lb axle with 10 inch brake assemblies/hub drums. We can't order custom axles, but we do offer a Dexter #7359765-EB off-the-shelf axle that's very similar, the only difference is that the leaf spring seat center to…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.
view full answer...The Replacement LED for Tow-Rax Recessed Lights #TWPWLS110V50W that you referenced most likely would work fine on your trailer that has flood light buckets already installed in it. This is designed to fit internal bucket dimensions of 10-5/8"…
view full answer...For your Sure Trac ST9614 HLODOD-B-140 trailer I recommend adding the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 #UF48-979002. I believe these will work well to stabilize your trailer for loading. They can be adjusted using the…
view full answer...To ensure that your spindle is not sticking out of your hub farther than it should, I would recommend verifying that all of your bearings and seals are seated correctly and the hub is tightened down correctly. When tightening the hub to the spindle,…
view full answer...It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does the width appear to…
view full answer...