Will Blower Rack for Utility Trailers Be Compatible with 12 Inch High Mesh Sides

Question

Question:

Hey, Thanks for your response. I however do have a very solid top rail to bolt it in to. I guess my main concern is the rack not being able to sit flush against the rail due to the mesh. Will it be ok resting against the mesh and then bolting it through the top rail, or do you have any better suggestons? Picture attached. Thanks

asked by: Corey

0

Expert Reply:

The Lockable Blower Rack for Utility Trailers # RA-19 is 39-1/2 inches tall and 13-1/2 inches wide. The 12 inch mesh sides will not support this rack, so you will need further bracing to your trailer like a rail to give you the stability needed to mount this rack.

expert reply by: Jason S

0

click to enlarge

Corey

2/1/2019

Hey, Thanks for your response. I however do have a very solid top rail to bolt it in to. I guess my main concern is the rack not being able to sit flush against the rail due to the mesh. Will it be ok resting against the mesh and then bolting it through the top rail, or do you have any better suggestons? Picture attached. Thanks

Reply

Jason S.

2/1/2019

Thanks for the photo and further description. You will nave no problem mounting the blower rack to your trailer. The mesh is welded to the frame so it will be secure and the frame of the rack will be plenty sturdy with that mesh between it and the frame rail of your trailer. There won't be any issue with resting against that metal mesh.

Reply

Answer 1

The Rack'em Lockable Blower Rack for Utility Trailers part #RA-19 is designed to be installed on an open trailer. The photo you have attached looks very similar to that of an open trailer so I see no issues. I recommend using one bolt to…

view full answer...

Answer 2

There is no recommended center to center distance for the Pack Em Trimmer Rack, #PK-6, but they must be mounted a minimum of 3ft apart. Trimmers come in different sizes and lengths, so it is best to mount the racks to fit your specific trimmers.…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I do have an option for you but the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate part #VGD-10-4000 does not have a spot for the factory backup camera. Therefore you would either need to find a way to mount this yourself, go without, or…

view full answer...

Answer 6

For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…

view full answer...

Answer 7

The Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV does not come with great instructions. In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV, you will need to…

view full answer...

Will Blower Rack for Utility Trailers Be Compatible with 12 Inch High Mesh Sides

Product Page this Question was Asked From

Continue Researching