Videos
for ATV Ramps
Help Articles
for ATV Ramps
Expert Answers
for ATV Ramps
What will help prevent the bottoming out is a ramp set that is longer and has a bit of an upward bow like the #288-07489 has. Without knowing the length of your current ramps I can't say if these would be an improvement in that area.…
view full answer...The longest folding ramps we have for you is the Arched Loading Ramp Set part #288-07432 for 1 or part #288-07432-2 for 2 which are 90" long. The 90" length will ensure the angle that will be required to load the generator…
view full answer...For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…
view full answer...Yes, the Curt Custom Base Plate Kit #C36JR is confirmed to fit your 2020 Ford Expedition 4wd. It will also allow for you to use a Blue Ox Tow Bar #BX7420. Do ensure you install a Charge Line Kit #RM-156-25 as the battery will while being flat towed…
view full answer...The mounting bracket for the #TV34FR is actually identical to the bracket on the #TV64FR that you were looking at. The holes are 1" apart on center vertically, and 5-1/2" apart horizontally. I have attached a picture for your…
view full answer...The ramp set part #288-07489 that you referenced has a combined weight capacity of 3,000 lbs for both. Individually each has a 1,500 lb capacity and each ramp has three prongs that lean on the trailer. So each of them is rated for 500 lbs…
view full answer...Yes you can just swap out the bars on your Equal-i-zer Weight Distribution System w/ 4-Point Sway Control #EQ64FR with the Replacement Spring Bar for Equal-i-zer Weight Distribution Systems #EQ90-02-1499.
view full answer...We have ramps that will work perfectly for loading your 1690lb UTV into the bed of your truck. I recommend the Arched Loading Ramp Set #288-07432-2 which is 90" long x 18" wide and has a combined weight capacity of 3000lbs. The…
view full answer...For most golf carts you want to go with a 1,000 lb capacity loading ramp. I would however recommend the Erickson Arched Ramps part #EM07486 as they have a 3,000 lb capacity, an aluminum construction which will make them lightweight, and straps that…
view full answer...The shock absorption from the Gen-Y Torsion 2-Ball Mount #325-GH-1324 will help cushion abuse on your trailer tongue and the tow vehicle. However, you need to make sure you have enough tongue weight for this to be effective. The optimal ride tongue…
view full answer...I reached out to Mad Ramps about the MAD-MOUNT Wall Mount Brackets for Mad-Ramps Pivoting ATV/UTV Ramps part #MR27DR and they informed me that the brackets are both 36" long x 2-1/2" tall. I have attached a photo below with this as…
view full answer...Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes,…
view full answer...