The ski and snowboard racks we offer are not designed to hold the ski poles as well but they can be used in such manner, you would just want to bump up to the next size. Since you mentioned that you had trouble closing the latch on your previous carrier, I recommend using the Yakima FreshTrack Ski and Snowboard Carrier part # Y03093 because the latch can be secured at multiple points for the perfect amount of tension on the skis. This is shown in the review video I have attached for you... view full answer...
We can get your 2018 Mitsubishi Outlander set up for towing with a hitch and wiring harness, and let's go ahead and start with the hitch, and what you will need is the following:
- etrailer Trailer Hitch Receiver # e48KR
With the hitch set, the next thing you will need is the wiring harness, and there are two different harnesses for your 2018 Mitsubishi Outlander PHEV, with the correct one depending on if you have the Factory Tow Package or not.
- WITHOUT Factory Tow Package: Vehicle... view full answer...
Since you have the factory tow package on your 2018 Mitsubishi Outlander the trailer wiring kit you'll want is the T-One part # 118277. I recommend this kit because it plugs right into the factory trailer wiring connector your vehicle has at the rear of it and also because it has our most reliable converter box of all of the kits we offer. I attached an install video for this kit for you to check out as well. view full answer...
For your 2019 Mitsubishi Outlander I highly recommend the Curt Class III Receiver Hitch # C13163. This custom hitch is going to line right up to existing holes in the Outlander's frame rails for a simple bolt-on (no-drill) installation.
The hitch itself will provide you with a 2" receiver and it features a 4,000 pound towing weight capacity along with a 600 tongue weight limit. It's assembled right here in the USA and all the needed hardware is included. I have attached an installation... view full answer...
For your 2018 Mitsubishi Outlander I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13163. This hitch has a class III rating with 2" receiver tube opening so it can be used with virtually any hitch mounted bike rack without issue. It is a bolt-on fit with no drilling or cutting required. view full answer...
The Derale Series 8000 Plate-Fin Transmission Cooler # D13503 that you referenced is a universal fit supplemental transmission cooler. As long as you have room for it in front of your radiator/ac condenser it would work just fine on your 2007 Mitsubishi Outlander. The dimensions of this cooler are 11" Wide x 8-3/4" tall x 7/8" deep. I attached an install video for you to check out as well.
It sounds like you are trying to replace your factory cooler with this one. While this isn't the... view full answer...
For your 2012 Mitsubishi Outlander with raised side rails that run from front to back I would recommend the Thule Aeroblade Edge Roof Rack part # TH7503-TH7503.
This will fit secure to the raised rails of your vehicle and will provide you with an OEM looking roof rack that will be very quiet.
You will want to be sure you check the roof capacity of your vehicle that is listed in the owners manual of your vehicle and be sure not to exceed this figure with the weight of any roof cargo. view full answer...
An anti-rattle hitch lock that uses a regular hex-head bolt should fit your Curt trailer hitch # 13581. Take a look at # SR25219. The head will be approximately 3/4 inches wide so measuring from the center of the hitch pin that would be 3/8 of an inch. If you have 3/8 of an inch from the center of the pin hole to the bar on your hitch then this lock would work.
Another option is to use a regular hitch lock such as # C23519 and a stand-alone anti-rattle device like # BX88224. view full answer...
Only the Curt hitches that aren't rated for use with a weight distribution system will have the stabilizer strap recommendation when used with a non-supported load like a cargo carrier.
The Curt hitch part # C13163 would not require the use of a stabilizer strap in any situation.
For a cargo carrier our most popular option is the Pro Series carrier part # 63153. view full answer...
According to Yakima, their ski and snowboard rack # Y03092 should fit the factory crossbars on a 2012 Mitsubishi Outlander. This economical roof-mounted rack holds 4 pairs of skis or 2 snowboards and uses Same Key System (SKS) lock cores to secure your gear to the carrier as well as the carrier to your crossbars.
If your Outlander still needs a roof rack, I recommend taking a look at the Rhino-Rack 2500 Series Roof Rack with Vortex Crossbars # RRVA137B-2, # RRRLKVA, and # DK228. This is... view full answer...
We do not carry the vehicle-side plug for a European 7-way round plug like you said is on your trailer. You will need to find one locally.
You can use the tail light converter like part # 118158, and along with a 4-way harness like part # 18004, you can make an adapter that will work for you. I have attached a photo with all of the wires for input and output noted you can check out. view full answer...
For your 2020 Mitsubishi Outlander I recommend the Curt hitch part # C13163 as it has plenty of towing capacity and installs relatively easy. I attached an install video for you to check out as well.
For trailer wiring the easiest to install and most reliable option is the Tekonsha part # 118482.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise... view full answer...
The Roadmaster Adapter part # RM-076 has only been tested for flat towing situations so I cannot recommend you use it to give you additional ground clearance with your cargo carrier on your 2009 Mitsubishi Outlander.
The best recommendation I could give you would be to get the Curt Multipurpose Ball Mount # D210 and use the top opening to give you additional an additional 6 inches of rise.
I attached a review video for you to check out also. view full answer...
For a trailer hitch confirmed as a fit for your 2018 Mitsubishi Outlander we have the Curt hitch part # C13163 which would fit and work well. This is a Class III hitch with plenty of towing capacity at 4,000 lbs trailer weight capacity.
For wiring you'd then want Tekonsha kit part # 118482 which is a confirmed fit and will work well. This is our most reliable brand/option that we have so it would be a great choice.
If you wanted to do some towing you might be interested in etrailer ball... view full answer...
The Hollywood Racks Over-the-Top 3 Bike Rack # HRF2-3 is indeed what I recommend for your 2008 Mitsubishi Outlander but it will absolutely also fit your 2017 Honda CR-V that doesn't feature a spoiler. In fact this particular rack is confirmed to fit the CR-V and it will work great because the rack's high-rise frame and multiple strap mounting options also make it an ideal carrier for vehicles with a rear hatch door even if they don't have a spoiler. This is a great option to transport your... view full answer...
I have a few recommendations but all of the roof rack systems for your 2020 Mitsubishi Outlander will run across the roof from driver side to passenger side and not front to back.
If your Outlander has flush mounted rails that run front to back I highly recommend the Thule WingBar Evo Roof Rack System that uses the 53" Thule WingBar Evo Crossbars # TH711400, Evo Flush Rail Feet for Thule Crossbars # TH710601, and Fit Kit # TH186016. The reason I prefer this system is due to the aero bar... view full answer...
It sounds like you have 4 on 4 bolt pattern wheel and tire combination that is 16-1/2 inches overall diameter, 6.5 inches overall wide and mounts on an 8 inch rim.
If the above is correct the Kenda 165/65-8 Bias Trailer Tire with 8 inch White Wheel - 4 on 4 - Load Range C, item # AM3H200, would be the correct tire and wheel replacement, as long as the .1 inch extra width will not interfere with the trailer framing or fenders. The correct replacement tire only for a 8 inch x 3-3/4 inch... view full answer...
First thing you'll need for your 2003 Mitsubishi Outlander is a trailer hitch like the Curt hitch part # C12293 which is a confirmed fit and will work well. Next you'll need trailer wiring. Which for that you'd want the # C55565 which is a confirmed fit too.
For a ball mount you'd then want the part # 3591 and for hitch balls part # 19258 for a 2 inch ball and part # 19256 for a 1-7/8 inch ball. view full answer...
I have a recommendation for you but like you said an adapter that allows for a rise in the shank and has a receiver for a bike rack is not available. What I recommend is to use an extra-long ball mount # BM20 in the rise position to be a 3/4-inch rise (the tongue weight of the trailer will pull it down some closer to level).
Then you can use a towing bike rack such as the # C18013. I have included links to video reviews of all of these products for you. view full answer...
You can add a 7-Way to your 2019 Mitsubishi Outlander PHEV as long as you have a 12V battery somewhere. If you aren't sure, I recommend asking your local dealer if you have a 12V auxiliary since the main PHEV battery appears to be 300V. Assuming you do, you can use the Universal Installation Kit for Trailer Brake Controller # ETBC7L.
This kit comes with the adapter, wiring, and everything else you need to upgrade your existing 4-way to a 7-way. For a brake controller, you can use the Curt... view full answer...
Go To Results