Recommended Trailer Hitch and Wiring Harness for 2018 Mitsubishi Outlander

Question

Question:

I have a 2018 Mitsubishi Outlander. I am looking for a tow hitch with lights and wiring harness for the vehicle! I will be towing 2 to 4 lawn mowers, snow blowers and such! Please let me know what I need for this!

asked by: Gilbert D

0

Expert Reply:

We can get your 2018 Mitsubishi Outlander set up for towing with a hitch and wiring harness, and let's go ahead and start with the hitch, and what you will need is the following:

- etrailer Trailer Hitch Receiver # e48KR

With the hitch set, the next thing you will need is the wiring harness, and there are two different harnesses for your 2018 Mitsubishi Outlander PHEV, with the correct one depending on if you have the Factory Tow Package or not.

- WITHOUT Factory Tow Package: Vehicle Wiring Harness # C59496
or
- WITH Factory Tow Package: Vehicle Wiring Harness # C77KR

expert reply by: Kyle S

0

Answer 1

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Answer 2

The only part of the Curt Trailer Hitch Receiver part #C13398 that will be visible once installed on your 2018 Mitsubishi Outlander PHEV will be the receiver tube opening. Therefore, the majority of the hitch will actually be hidden. I do have an…

view full answer...

Answer 3

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 4

We have the Curt hitch part #C13163 that fits your 2019 Mitsubishi Outlander non-PHEV but the #C13398 only fits the PHEV models.

view full answer...

Answer 5

Draw-Tite confirms that their Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - 2" #DT52GR is a fit for the 2021 Hyundai Kona EV. There aren't any permanent modifications required, but there is an underbody panel and fascia that will…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13163 excludes the PHEV. However, there is a 2018 Mitsubishi Outlander PHEV fit and it is #C13398. This will work well for bike racks and other accessories. If you will be towing, I…

view full answer...

Answer 7

The 2018 Mitsubishi Outlander PHEV does not have a custom compatible wiring harness from any of our manufacturers. I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT to…

view full answer...