Recommended Trailer Hitch for 2019 Mitsubishi Outlander
Question:
Hello. which trailer hitch do you recommend for my 2019 Mitsubishi Outlander. It is not the PHEV model. Thank you.
asked by: Gloria
Expert Reply:
For your 2019 Mitsubishi Outlander I highly recommend the Curt Class III Receiver Hitch # C13163. This custom hitch is going to line right up to existing holes in the Outlander's frame rails for a simple bolt-on (no-drill) installation.
The hitch itself will provide you with a 2" receiver and it features a 4,000 pound towing weight capacity along with a 600 tongue weight limit. It's assembled right here in the USA and all the needed hardware is included. I have attached an installation video that you can use for reference.
I'm not sure what you plan on using the hitch for but if it's to do some towing you will also need to add a trailer wiring harness. If your Mitsubishi doesn't have the tow package (which would already include a harness) the Tekonsha T-One # 118482 will work perfectly. This will plug into factory ports behind the rear tail lights and run up to the vehicle's battery to provide you with a 4-Way connector to power a trailer's basic signal lights.
I have included the written installation instructions that you can also check out.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Install Photo of the Curt Hitch C13398 On a 2018 Mitsubishi Outlander PHEV
- Q&A: Trailer Hitch that Fits 2019 Mitsubishi Outlander Non-PHEV
- Q&A: Do I Need A 7-Way To Tow an Aliner Ranger Trailer With a 2007 Toyota RAV4
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does eTrailer Ship to Canada
- Q&A: Base Rails and Brackets Needed to Install the Older Demco Hijacker FWH24PA in a 2017 Ram 2500
- Q&A: Trailer Hitch for 2018 Mitsubishi Outlander PHEV