It looks like the 2020 Ford Explorer comes stock with the raised rails. For this, I recommend the Thule WingBar Edge Crossbars - Silver # TH53RE or Black # TH69FE, coupled with the Raised Rail Feet # TH69SC.
The fact that they have a t-track on top means that you have a wide variety of accessories that you'll be able to mount to them. I spoke with a Thule representative and they assured me that the raised rails of your Explorer would ensure that you will have no problem with the rack... view full answer...
For your son's 2019 Ford Explorer I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76034 due to it having the highest maximum tongue weight rating at 675 lbs and highest maximum trailer weight rating at 4500lbs. This doesn't nessacarly mean the vehicle is capable of that much weight, as you will need to check the owner's manual to verify the maximum Ford lists based on the options the vehicle has, but does mean it is a very strong trailer hitch receiver.
For wiring it will... view full answer...
With just the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118540 installed not connected to a trailer there would not way it would just put an amperage draw on the electrical system. Current has to go somewhere to draw from the battery so it just being installed without powering lights it can't drain the battery. view full answer...
To add a 4-way to your 2014 Ford Explorer what you need is the wiring kit part # 118540 which is a confirmed fit and plugs right into the connector at the rear of your vehicle. I attached an install video for this for you to check out as well. view full answer...
Most factory crossbars tend to have a bit of an arch to them like what you are noticing on your 2016 Ford Explorer. This will not be an issue as it relates to the fit of a cargo basket (or other roof-mounted accessory). The only thing you might want to do is simply position the basket in the center of the roof so it doesn't lean any to one side or another.
I recommend going with the Thule Canyon XT# TH859XT that you referenced. Its dimensions of 49 inches long and 40 inches wide are very... view full answer...
We have great options for trailer hitches that fit your 2013 Ford Explorer like the Draw Tite part # 76034 which has higher towing capacities than our other options. For trailer wiring you'd then want the # C56093 which is a custom fit option that will install easily.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also... view full answer...
For carbon framed bikes you need to carry them with a bike rack that only touches the bikes by the tires since the frame material is delicate and easily damaged. So for that you could use the very popular and easy to use Kuat NV part # BA22B which is widely considered to be the best bike rack for carbon bikes.
Then when you are ready to expand it to a 4-bike rack you'd just need the part # BA02B and you'd be set. view full answer...
Electric bikes, or e-bikes, are more popular than ever and they are a fast-growing category within the bicycling world. You are absolutely right that e-bikes tend to be pretty heavy, especially when their battery packs are installed; these alone can easily weigh 20-lbs or more and increase the total load of an e-bike to a weight that many otherwise excellent bike racks simply cannot handle. Most bike racks top out at 35-lbs per bike.
The smart people at Thule, one of the world's premier... view full answer...
The Tekonsha Primus IQ Trailer Brake Controller part # TK90160 is an excellent option for a 2017 Ford Explorer and what I recommend using. It has boost features for increased aggression, an easy to read display, and integrated safeguards/diagnostic checks. It will offer plug-in-play installation when used with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3035-P. There will be no additional wires that need to be run for the above to work. view full answer...
Great question.
Without cutting a hole you wouldn't be able to get enough clearance for the jacks to work. I would strongly recommend using them on the outside to prevent clearance issues and probable damage.
However, I think you would be better off going with the Stallion Stabilizer Jacks - 7" Drop Leg Travel - 22-1/4" - Qty 2
# 288-01892-2 you can mount them underneath and then they can fold up and out of the way. view full answer...
Good question.
It is not possible to flat tow, four wheels down, your 2021 Ford Explorer. Per the 2021 Ford Explorer owners manual.
If you have a front wheel drive version you can dolly tow it, front wheels up. Using the Demco Kar Kaddy SS Tow Dolly with Disc Brakes - Foldable - 4,800 lbs # DM9713045. The standard ST model is 4701 pounds if this is the case make sure you keep it unloaded so you won't exceed the weight limit on the Kar Kaddy.
If you have rear wheel, all wheel or four... view full answer...
In order to use a Blue Ox tow bar with a Roadmaster base plate on your 2014 Explorer, you will first need the Roadmaster XL Base Plate Kit, part # 4427-1A. The # 4427-3A will not work with the Aventa tow bar.
The tow bar adapter you will then need is part # RM-033. This adapter mounts to the plates on the 4427-1A base plate kit and your Aventa,, part # BX7450 or part # BX7445.
For a cost savings, you may want to consider the Blue Ox Base Plate Kit, part # BX2632. This would require no... view full answer...
For the 2013 Ford Explorer we don't have any hidden trailer hitches but our best option is the part # e98867 which has great towing capacities, installs easily, and is priced the best.
If you wanted trailer wiring too the Tekonsha kit part # 118540 would be the correct kit that is the easiest to install. view full answer...
I do have a great option for you, however the B&W Companion Slider 5th Wheel Hitch # BWRVK3400 likely won't work on a flat bed truck because the gooseneck hole would be too far recessed in the bed. It's designed to fit into the hitch ball hole for the B&W Turnoverball Gooseneck Hitch that fits standard truck beds, so it's just not sized appropriately to connect to a recessed hole like what you would find on most flat bed setups.
A much better option will be with the B&W Companion Flatbed... view full answer...
Yes, the Curt Wiring Harness part # C56172 that you referenced has been confirmed to fit the 2014 Ford Explorers.
I attached an install video for this product for you to check out as well. view full answer...
I have a solution for you, but there are no hitch mounted cargo carriers that allow you to install a bike rack into the end of them. That would be too much leverage on the hitch and would add quite a bit of distance the rear of your vehicle.
Instead you would want a straight shank cargo carrier like the part # CC-100 and then use a towing rack like part # C18013. This will attach to the shank of the cargo carrier and will allow you to transport 2 bikes. See review video.
Or...you could... view full answer...
Yes, you can order just the install hardware for the hitches we carry. All you need is the part # RHK.
On the product page for RHK you will need to enter the part number of the hitch and then select the manufacturer and we will ship you out the correct install hardware.
I checked your order notes and it looks like you ordered the Curt hitch part # C13386. view full answer...
I have a solution for you. The only roof rack system we have available that will work with your 2016 Ford Explorer's bare roof is the Seasucker Monkey Bars - 48" # 298-SX6000B. The height of the Seasucker Monkey Bars is just under 4-1/2 inches from the top of the roof to the top of the crossbars. One great feature is the mounting vacuum cups. The vacuum cups secure tightly to the roof's vehicle and gives your vehicle 150 pounds of maximum carrying capacity. The Monkey Bars has the easiest... view full answer...
We can offer you a choice of universal-fit towing mirrors for your 2004 Ford Explorer XLS. These are available in clip/clamp-on, door-mount and fender-mount types that can all be seen by clicking on the included link.
In the clip-on variety that attach to your existing mirrors I recommend the K-Source # KS3891 which is sold as a single unit. This installs without tools. For a wider-view option you can use a door-mount mirror like CIPA # 11650 as long as your doors do NOT have plastic... view full answer...
An adapter bar might be required to hold your children's size bikes in the Thule Passage 2 Bike Rack # TH910XT. This rack will accommodate some children's bikes, but I cannot guarantee a fit for your bikes because bike frames come in many shapes and sizes.
One reason you might need an adapter is if there is not enough room in the bike's frame for the carrier's arms to fit through. The arms of the bike rack measure 14 inches from center of arm to center of arm. If the arms cannot fit through... view full answer...
Go To Results