The correct replacement key for your SportRack roof cargo carrier, is the Replacement Key for Thule Racks and Carriers # THKEYN141.
Since Thule makes the SportRack cargo carriers, this will work for you. view full answer...
The 4-way trailer connector on your 2013 Kia Sorento should have a powered converter which reduces the draw on the vehicle's lights. It draws the power for the trailer's lights directly from the battery. So you won't have any problems adding a 5-way connector.
You can use an adapter like # 20036 that converts the 4-way to a 5-way. Your 4-way plugs right in and then the extra blue wire gets tapped into the reverse light circuit on your Sorento.
If you don't already have a 4-way trailer... view full answer...
Exactly what is included on a vehicle that has a "tow package" can vary considerably from one auto maker to another, and also from model to model and year to year. If necessary your local Kia dealership can look up your VIN to find out all of the equipment that was installed on your specific car at the factory.
For wiring, if you do NOT have the tow package you can use Curt kit # C59236 or if you DO have the tow package instead use # C56332. Videos for both harnesses are linked for you... view full answer...
According to page 5-59 of the online version of the owner's manual for your 2012 Kia Sorento, the max weight you can tow with the 3.5L engine is 1,588 lbs when using a brake system. Even though Class I trailer hitches exceed this weight rating I highly recommend going with a Class III trailer hitch that has the 2" receiver because it gives you a lot more versatility in how you can utilize the trailer hitch.
For your application I recommend the Draw-Tite Max-Frame # 75684 because it is... view full answer...
It looks like your questions have been answered from when you originally asked other than a recommendation for a brake controller. I suggest the Prodigy P2 # 90885 because of how reliable it is and how easy it to use. You'll also need some additional parts to install it.
On your 2011 Kia Sorento you'll first need a 4-way trailer connector. The # C56332 will provide this for you. It plugs directly into your Kia's wiring using a plug along the frame rail at the rear of the vehicle.
Once... view full answer...
Yes we do have replacement hardware kits for this Curt # 13408 hitch.
You will want to go to the product page of Replacement Hardware Kit for Trailer Hitches # RHK and enter in your hitch item number, for examle, # 13408. Then select the hitch manufacturer and add to cart.
Always make sure to replace the mounting hardware when transferring a hitch to another vehicle.
I have attached a demonstration video for the hardware. view full answer...
WeatherTech Cargo Liner # WT40797 is intended for the 5-passenger version of the 2016 Kia Sorento but we do have the cargo area mat meant for your 7-passenger. Black mat # WT40766 will fit from the back of your 2nd row seats all the way to the rear of the cargo area.
For matching black front floor mats use item # WT447701. For 2nd row floor mats use # WT447702.
Due to their high-quality thermoplastic material the WeatherTech mats may be a little stiff when you unpack them. They will benefit... view full answer...
I have the the Tow Ready Mounting Bracket 4-Pole Flat, # 18144, is a 4-Way connector holder that will attach to the hitch or the bumper.
If you did not want to drill into the hitch or bumper to attach your mounting bracket then I have the Tow Ready No-Drill Mount Bracket, Short, # 18140. This bracket will attach to the trailer hitch with a hose clamp and the Tow Ready, # 18144, mounting bracket would attach to this bracket.
I am sending video links on the Tow Ready mounting bracket... view full answer...
I can definitely help you out with all the part numbers needed for your 2023 Kia Sorento for the Curt Echo Under-Dash brake controller. I do want to mention there is not a plug-in option for any brake controller for your Sorento so it does have to be hardwired, and what you need to add the 7-way and Echo is the following:
- Curt Echo Under-Dash Wireless Brake Controller # C27JR
- Universal Wiring Adapter for Curt Trailer Brake Controllers # C51515
- Universal Installation Kit for Trailer... view full answer...
All of the 4-pole trailer wiring harness kits we offer for the 2014 Kia Sorento, shown on the linked page, are the powered converter type. This means that a secondary 12V power connection for the harness is made directly to the vehicle battery, which provides the actual power to illuminate the trailer lights. This harness type does isolate the car's wiring from any potential faults or shorts on the trailer.
The specific powered harness you need depends on how the car was equipped from... view full answer...
For a rubber hitch cover that'll work with your etrailer Trailer Hitch Receiver # e28AR you can use the etrailer Rubber Hitch Cover for 2" Trailer Hitches # 22282. view full answer...
What you are experiencing when trying to install The Curt Hitch # C13513 onto your 2008 Kia Sorento is that the weld nuts are packed with corrosion and/or road grime. This happens on any vehicle that has seen at least one winter. You will need to clean out the weld nuts so the bolts can be properly threaded freely.
I would recommend spraying some lubricant like WD-40, and using a Wire Brush # DW00254. Doing this will take some patience. I attached a few helpful links below that will help... view full answer...
For your 2016 Kia Sorento I suggest the Curt # C13195. This is a Class III hitch that will fit 2 inch ball mounts and accessories. It's designed specially for your Kia.
If you're going to be towing a trailer you'll also need wiring to power the trailer's lights. If your Sorento has the tow package use # C56332. If not use # C56256.
I've attached install videos of the hitch and both harnesses.
Depending on your trailer you may want an adjustable ball mount. I've linked our selection... view full answer...
I recommend using the Thule Load Bar Adapter for Peloton and Echelon Bike Racks # THXADAPT9, which was confirmed by my contact over at Thule. You could also use the Thule XADAPT2 AeroBlade and Xsporter Load Bar Adapter for Roof-Mounted Carriers # XADAPT2 as Jamieson mentioned, but it takes some modification of your platform. view full answer...
I contacted our representative at Yakima about mounting your older model PowderHound Ski Rack to the factory crossbars of your 2011 Kia Sorento. He informed me that you will need to use the Yakima Universal MightyMounts, part # Y03590.
The item you referenced, Replacement Mounting Hardware # Y8860040, will only work with the newer model PowderHound.
I have linked instructions and a video review of the Yakima Universal MightyMounts, part # Y03590. view full answer...
The Rhino-Rack Pioneer Platform Rack # RR97AB is confirmed to fit your 2017 Kia Sorento and comes with everything you need to install it on your vehicle.
The custom legs will attach to your flush factory side rails on your vehicle's roof. The rack has a low-profile, aerodynamic design that will help reduce wind noise and drag. The aluminum frame is powder coated with reinforced nylon connectors for durability. view full answer...
The 2022 Kia Sorento Roof Rack by Thule includes:
Thule WingBar Evo Crossbars - Aluminum - Black - 50" Long - Qty 2 item # TH711320. These premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. The WingBar Evo crossbars are made of anodized aluminum with internal BoxBeam structures. These structures strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum, they won't rust or corrode... view full answer...
When it comes to installing a trailer hitch on your 2022 Kia Sorento Hybrid I recommend The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C34ER. This hitch has a gross towing weight up to 4,000 pounds and has a gross tongue weight up to 600 pounds, which will be great for carrying a bike rack. Make sure to check your vehicle's manual to get the proper towing capacity for your vehicle. . This hitch has a concealed cross tube that will give it a sleeker look after the hitch... view full answer...
If you have the factory tow package you can use the Tekonsha # TK24FR. Even though you do not have a factory hitch installed, it is still possible you have the tow package. If you have the tow package you can find the connector underneath the vehicle, on the passenger's side, on top of the frame rail near the rear tire. This can also be seen in the instructions below for the # TK24FR.
If you do not have the factory tow package you will need to start by adding the Tekonsha T-One Vehicle... view full answer...
The Draw-Tite 2-inch Class III hitch # 75684 is an ideal choice for towing with your 2011 Kia Sorento 4-cylinder. You'll just want to check your owner's manual to confirm the car has the required towing capacity for your particular camper trailer when it is all loaded up.
Along with the hitch you will need a couple of other towing components so for the most flexibility I suggest the etrailer.com Ball Mount Kit # 989900 which includes 2 hitch balls and 2 ball mounts along with the required... view full answer...
Go To Results