Expert Answers about Toyota Sequoia

• Recommended Axle To Replace Axle On Boat Trailer W/ Uncommon L44649/LM11749 Bearings
• I have a replacement axle option for you, but we do not have any hubs that use inner bearing # L44649 and outer bearing LM11749 and I was unable to locate any from any other vendors. This is a bearing combination typically found on older trailers and replacement parts are no longer made so the hubs are pretty few and far between. Besides searching resale websites for some new old stock to pop up, your best bet is to replace the axle with one that uses a standard bearing combination. More...
  view full answer...


• Trailer Hitch, Wiring and Accessories to Tow a Pop-up Camper Trailer with a 2002 Toyota Sequoia
• I will be happy to set you up with everything you will need to tow a trailer with your 2002 Toyota Sequoia. First, you will need a trailer hitch. I have included a link to the trailer hitches that we offer for your vehicle. The most popular option is Draw-Tite trailer hitch # 75126. This is a Class III hitch with a 2 inch receiver. The 2 inch receiver has the widest range of accessory options. It also has a tongue weight capacity of 500 pounds and a gross trailer weight capacity of 5,000...
  view full answer...


• Recommended Way to Reduce Rear End Sag When Towing Lance 1575 Travel Trailer 2006 Toyota Sequoia
• The Black SumoSprings Solo Custom Helper Springs # SS78DR having he higher weight capacity of 1,800lbs will not compress as far as the Blue # SS68DR with the same amount of weight. Do remember that with these on your 2006 Toyota Sequoia since the black springs are stiffer you will get that back as a firmer ride when you are unloaded. The best way to help with your rear sag is with a Equal-i-zer Weight Distribution System # EQ37060ET. This will allow you to transfer the weight from the...
  view full answer...


• 2021 Toyota Sequoia Front Mount Hitch and Bike Rack Recommendation for e-Bike
• Yes, you can use any of the 2" hitch mount bike racks once you install a front mount hitch on your 2021 Toyota Sequoia. I recommend checking out the Curt # 31198 because the Curt hitches tend to have a thicker powder coat so it will hold up to the elements better. For a bike rack I recommend checking out the RockyMounts HighNoon FC Solo Bike Rack for 1 Bike # RKY87RR because it's a 1-bike rack that can hold up to a 60 lb bike with a 5" wide tire. Unlike other wheel-mount racks, this rack...
  view full answer...


• Dust Cap Recommendation for Ranger Trail Boat Trailer with Hub Bore of 2.326 inch Hub
• We have the Bearing Buddy part # BB2328SS which is designed to fit the hub bore of 2.328 which would be the closest cap solution we have. It would be tight but it would fit.
  view full answer...


• Frame-Mounted RV Hitch for 2016 Keystone Passport
• A frame-mounted hitch for your Keystone Passport is a much better option than a bumper-mount type, both for stability and for weight capacity. We offer several frame-mount RV hitches with capacities up to 500-lbs of tongue weight. All such items are shown on the linked page. The key is checking your trailer's frame width to find the best match and the required capacity. We also have some with drop, such as Curt # C13701 which has its 2-inch receiver 2-inches below the crosstube.
  view full answer...


• Snow Chains that wont Scratch P275/55-R20 Toyota Sequoia Platinum Wheels
• The tire chains that fit your tire size of 275/55-20 that will protect the wheels and vehicle the most is going to be the Konig K-Summit chains part # KON84FR which unlike other options does not touch the wheel at all so the finish would not be affected at all. It's also option that has the best inner wheel clearance since it does not drape over the inside of the wheel at all. Konig also has a lower priced option that is more like a standard tire chain that has tire protection with the...
  view full answer...


• Recommended Trailer Brake Controller For a 2024 Toyota Sequoia with Factory Tow Package
• I recommend installing the Redarc Tow-Pro Liberty Brake Controller # RED24FR on your 2024 Toyota Sequoia. For this we have the Plug and Play Wiring Harness # RED49FR which will make the wiring much easier. You are also able to install the control knob in one of the factory switch panel blanks using the Mounting Panel # 331-TPSI-002. This way you will not have to drill mounting holes into your dash like other controllers require.
  view full answer...


• Towing Mirror Recommendation for a 2014 Toyota Sequoia
• For a set of towing mirrors confirmed to fit your 2015 Toyota Sequoia you would want the CIPA Mirrors part # CM11300 as these have been confirmed as a fit. I attached an install video that shows these mirrors being installed for you to check out as well.
  view full answer...


• Recommended Weight Distribution Hitch System For a 7X14 Enclosed Trailer 7,000LBS GVWR
• I recommend using the Fastway e2 Weight Distribution # FA92-00-0800 for your 7x14 Interstate Loadrunner tandem axle trailer. This hitch is rated for trailers up to 8,000lbs with a tongue weight between 400-800lbs. If your unloaded tongue weight is lower than 400lbs you can swap the bars for 2 of the 600LB Trunnion Bars # FA92-02-0699. These are rated for a tongue weight of 250-600lbs. The e2 hitch incorporates sway prevention in the hitch. This is very important especially with an unloaded...
  view full answer...


• Tire Chain Recommendation for 2010 Toyota Sequoia
• For both of the standard tire sizes for your 2010 Toyota Sequoia of 275/65-18 and 275/55-20 the same tire chain sizes are listed. So for either size I would recommend the part # TC2327 if you have an Class S chain requirement (see owners manual). Or, if you don't and you want max mud traction the part # TC2439 would be really great with the bigger twisted links.
  view full answer...


• Weight Distribution Hitch Recommendation for Toyota Sequoia Towing Escape Travel Trailer
• I definitely appreciate all the research you've done and you sharing it with me as well. So the first thing to point out is that the weight of a weight distribution system does not need to be factored in as additional tongue weight. Our manufacturers have stated to us that the WD system essentially becomes a part of the hitch and therefore it's weight would not get factored. Equal-i-zer systems like the ones you mentioned are widely considered the best so you are on the right track with...
  view full answer...


• Suspension Enhancement Recommendation for 2008 Toyota Sequoia Towing Trailer
• The Timbren kit part # TTORSEQ1 that you referenced is the correct fit for your 2008 Toyota Sequoia and would give you additional suspension support when towing. That said I wouldn't necessarily recommend this kit unless you were planning to be towing most of the time as it would make the ride quality a bit harsher when not towing. The better option if you are concerned about ride quality is the part # F4164 which allows you to use varying air pressure in the bag so that you can tailor...
  view full answer...


• Recommended Fan-Powered Transmission Cooler For 2003 Toyota Sequoia
• The transmission cooler kit I recommend for your 2003 Sequoia is the Derale Hyper-Cool Remote Cooler kit, part # D15960. This kit includes the hardware to connect the cooler and the mounting hardware. This cooler is a stacked-plate cooler with a 500-CFM fan to make sure your transmission fluid stays as cool as possible. The great thing is this is a remote mount kit that can be mounted anywhere you have room under the hood. The cooler measures 13-inches wide x 10-inches tall x 5-5/8-inches...
  view full answer...


• Availability of Front Bucket Gray Covers for 2008 Toyota Sequoia
• The Clazzio Custom Leather Seat Covers - Gray # AL-EATOC2702GGG for your 2008 Toyota Sequoia is only available in the full set (Front, Middle, and Rear Seats) and unfortunately the front two bucket covers are not available as a separate product. For just two front bucket seat covers the only options available are in cloth, such as with the Covercraft Seat Covers - Gray # SS3388PCGY, which is a fit if your passenger seat folds flat or # SS3397PCGY if it does not. These are custom slip-on...
  view full answer...


• Roof Cargo Carrier Recommendation for 2003 Toyota Sequoia to Keep Cargo Dry
• If your 2003 Toyota Sequoia has raised roof rails that run front to back that you can fit your hand under the Surco Safari Rack 5.0 Rooftop Cargo Basket for Factory Rails # SPS5084-1101 will fit it and work well. Now that said since you are looking for a waterproof option your best bet would be to install a crossbar roof rack like part # MPG216 which is a confirmed fit and then install a large cargo box as they are the most waterproof. For that you'd want the Thule # TH629906 which can...
  view full answer...


• Recommended Rhino Rack Pioneer Platform for my Toyota Sequoia 2016
• I have a great solution but there is no available backbone system for your 2016 Toyota Sequoia from Rhino Rack. Instead the Rhino-Rack Pioneer SX Platform Rack part # JA8011 is a confirmed fit for your 2016 Toyota Sequoia this is designed to clamp on to your already existing raised factory side rails.
  view full answer...


• Recommended Towing Mirrors for a 2013 Toyota Land Cruiser
• While there are no custom fit mirrors for your 2013 Toyota Land Cruiser, I would recommend the K-Source Universal Dual Lens Towing Mirrors # KS3990, because of the dual mirror adjustment that increases viewing area. I have a video of these installed on a vehicle linked for your convenience. If you prefer a solid mirror opposed to the dual, you will want the K-Source Mirror # KS3891. Another mounting option to the snap on, that I like, are the Cipa # 11650 which is a door mount design...
  view full answer...


• Weight Distribution System Recommendation, 2007 Keystone Springdale 189FL and 2006 Toyota Sequoia
• According to the research I did, the 2007 Keystone Springdale 189FL had a dry weight of 4,185 pounds, a carrying capacity of 1,770 pounds, and a tongue weight of 455 pounds. If the trailer were loaded to capacity, it would weigh in at about 6,000 pounds. Since tongue weight should be between 10 and 15 percent of the gross trailer weight, that would put the tongue weight at a range of 600 to 900 pounds. When choosing a weight distribution system, you will want one that has a tongue weight...
  view full answer...


• Brake Controller for a 2005 Toyota Sequoia
• The brake controllers are not vehicle specific. For your Sequoia, I would recommend the Tekonsha Prodigy P2 brake controller, part # 90885. It is easy to use and install, which makes it one of our best selling brake controllers. The brake controller would plug into the existing port under the dash, using the Brake Controller Wiring Adapter, part # 3040-P. You can see an install video by using the provided link.
  view full answer...