The only way I can recommend fitting the light kit 59516 to the Carpod Carrier part # M2205-01-02 you have would be to use the brackets # BK70BB to attach the lights to the bottom of the carrier. In the picture I attached you can see a similar way this bracket was used with the light kit. view full answer...
In order to install the Fastway e2 Weight Distribution System part # FA92-00-0800 on a Airstream Basecamp X you'd likely need to modify the propane tank cover. That said, you would need to do this for most systems as well. If you don't want to do any trimming of the cover then you could use brackets which drill into the frame instead, the Chain Hangers for Reese Weight Distribution Systems part # RP58305 with the Strait-Line Weight Distribution System part # RP66082 which actually has better... view full answer...
For your application I recommend using a Yakima setup because they produce high-quality products that are designed to make your life and hobbies easier in the long run. I like the JetStream roof rack which is what I recommend for your 2019 Honda Pilot with the naked roof:
60" JetStream Crossbars - Black # Y00426
BaseLine Towers - # Y28TR
BaseClip - # Y06152
Lock Kit - # Y07204 (optional)
Then for a ski and snowboard carrier I recommend the Yakima FreshTrack # Y03093 because it comes with... view full answer...
When mounting a transmission cooler you want to install it in a location that will provide it with the max air flow as possible. Typically in front of the radiator is the best as that's where the vehicle was designed to provide the most air flow. Even being near the radiator the air moving as quick as it does through the fins would prevent heat build up. Plus you have the fan pulling the air through the cooler when at slower speeds.
That being said you still can mount it away from the... view full answer...
A Rear View Safety Camera will work on your 2009 Honda Pilot, but the tailgate versions # RVS-718-TAILGATE you're looking at is not the one you want to get. This kit # RVS-772718 is a flush mounting kit and will work with your Honda Pilot. If you have on star buttons on your Pilot, you will loose that function so be prepared for that.
If you wanted something a bit more simple to set up and able to move around to different vehicles, I would recommend getting the Swift Hitch # SH02Digital... view full answer...
Based on the dimensions of your bearings that you listed you have an 84 spindle and we have a hub that will fit it easily.
The part # 84545BX is a confirmed fit for your spindle and would work well. It has the same 5 on 4-1/2 inch bolt pattern too. view full answer...
The Swagman Original - 4 Bike Rack for 2" Trailer Hitches # S64400 will allow you to put your bike and 3 kids bikes on it. The bikes at a slight angle as you referenced, but with kids bikes it isn't as big a deal for ground clearances and level transport. If as they grow you want to level the bikes for safer transport, I recommend using the Swagman Deluxe Bike Frame Adapter Bar for Women's, Children's, and Alternative Frame Bikes # 64005. This creates a top frame rail between the seat... view full answer...
Yes we do have Class S compatible tire cables that are a fit for your 2022 Honda Pilot with 20 inch wheels with the Titan tire cables part # TC735DC. These are a diagonal set of cables which help with handling and braking when turning. view full answer...
For an economical solution for carrying a canoe on the roof of your 2006 Honda Pilot I recommend theRightline Gear Roof-Mounted Kayak Carrier, part # RL100K10. The foam blocks simply sit on the roof of your Pilot and this includes the tie-downs that go through the interior of the vehicle.
The bow/stern tie-downs are also included with this system. This system has a weight capacity of 130 lbs.
For a roof rack I recommend the Thule SquareBar Roof Rack. This roof rack includes 60 inch square... view full answer...
The brake controller I recommend for your 2018 Honda Pilot is the Prodigy P3 part # 90195. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. This will be the last brake controller you buy. It can easily be transferred to future vehicles as well.
All you need to install it in your... view full answer...
The wiring harness I recommend for your 2019 Honda Pilot is the T-One Wiring Harness with 4-Pole Flat Trailer Connector # 118760 because it is extremely easy to install on your '19 Pilot; you will only need to plug it into connection points behind your taillights and install a couple of fuses (which are included), as you can see in the linked directions.
Additionally, you can have faith in how dependable this harness is because its manufacturer, Tekonsha, has a very strong reputation for... view full answer...
There are no custom towing mirrors available for the 2015 Honda Pilot but what I recommend is K-Source mirror set # KS3990. These mirrors feature dual lens (flat glass and convex glass) for great visibility and versatility allowing you a much better view of what is behind you. I have linked a video review of these mirrors for you. view full answer...
Starting with the trailer hitch for your 2018 Honda Pilot I recommend the etrailer.com Trailer Hitch Receiver # E98840. This Class III hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. It will provide you with a 2 inch receiver opening and it has a towing capacity of 6,000 pounds, although you will also want to check the Pilot's capacity by looking through your owner's manual. You will just need to follow whichever limit is lower,... view full answer...
For a trailer wiring harness confirmed as a fit for your 2018 Honda Pilot there are two options I recommend but it depends on what your trailer has. If your trailer has a trailer wiring connector that is flat and has 4 prongs on it that means you need a 4-way. For that the best option is the T-One kit part # 118760. If instead your trailer has a round plug with 7 total contact points on it you have a 7-way and the you'd want is the part # 118286. The picture I attached shows the 7-way installed... view full answer...
To keep the same dimensions of tire diameter and width on your 2006 Honda Pilot, you are correct that the 235/60R18 is the correct fit. This will keep your 29 inch diameter and 9.3 inch tire width while giving you the larger rims.
Unfortunately we do not carry vehicle tires like you are seeking. I assume you are looking for some snow tire chains based on the product you asked the question from and the Pewag Snox Pro Self-Tensioning Snow Tire Chains # PWSXV580 are my recommendation... view full answer...
Yes, the Curt hitch part # C13146 is a confirmed fit for your 2020 Honda Pilot. This is a really solid choice for a hitch too as it has plenty of towing capacity, is mostly hidden for a concealed look, and has the highest quality powder coat so it will be the most resistant to corrosion. I attached a picture and install video for this for you to check out as well. view full answer...
To connect the 4-way of your 2007 Honda Pilot to the 7-way of your trailer that does not have brakes all you would need is the adapter part # 37185.
The 4-way of the Pilot will plug into it and the 7-way of your trailer will plug into the other end. view full answer...
For trailer wiring harness # 118286 for your 2017 Honda Pilot you would not need to add any additional wiring or run any extra wires. It comes with everything needed to make the 7-Way fully functional. To attach the 7-Way to hitch # e98840 I recommend bracket # PK12711U.
If you ever want to get a new brake controller, I recommend the P2 # 90885 because it is easy to set up and use and it is reliable. You will also need wiring harness # 3070-P to plug the controller into your Pilot if the... view full answer...
Sounds like your 2010 Honda Pilot has a 4-way at the rear of it currently and you are looking for a way to convert it to a 7-way and also install a P3 Brake Controller part # 90195.
For a trailer wiring harness you would want the Tekonsha Harness part # 118253. This will convert the 4-way to a 7-way.
Now to install the brake controller you will need the # 3070-P install harness that you referenced. view full answer...
The Brophy ball mount part # BM20 isone of the least shortest options we have (I think that's what you meant to type) which would work great for your application. Since you don't plan to tow, you'd have no reason to use a hitch ball either. view full answer...
Go To Results