Yes, the Curt Easy Mount Bracket # C58000 is designed to fit 2" receiver tube openings so it would be a compatible fit with your etrailer Trailer Hitch Receiver # e44AR. I've attached a short video below where Joe will walk you through the installation process. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 will allow you to carry your Yakima HoldUp Bike Rack # Y02443 behind your 2022 Honda Passport. The Draw-Tite receiver has a hidden cross tube so you will only see the receiver below your rear bumper fascia when you are not carrying the bike rack. It has a 2" receiver tube that will accept the 2" hitch on the Yakima rack.
I do recommend installing the T-Connector Vehicle Wiring Harness # C56291 so that you will be able to use Auxiliary... view full answer...
Yes it can change, which is why it's required for you to load your trailer and then get it weighed. You can either take this to a scale to get weighed or use the etrailer Tongue Weight Scale for Campers and Utility Trailers # e99044 and o it yourself. view full answer...
The Curt Trailer Hitch Receiver # C13421 is actually going to be a pretty easy installation on your 2024 Honda Passport, and it requires zero trimming of the rear fascia on your vehicle to do so. All you need to do is raise the hitch into place and get the hardware snugged up, then go back over them and torque them to the specs in the instructions and you'll be good to go!
I've linked our installation video of this hitch on a 2023 Passport that you can reference for your installation. view full answer...
I really like the etrailer Trailer Hitch Receiver # e44AR for your 2024 Honda Passport because it's the only option with a matte black finish that not only looks better, but is also more durable than the classic glossy black we see on the other hitches for your Passport.
Then for wiring you can either go with the 4-Way # C56291 or the 7-Way # CU86FR depending on what type of connector your trailer has. I also recommend picking up the No-Drill Bracket # C57202 along with the 4-Way Bracket... view full answer...
I recommend installing the Thule WingBar Evo roof rack on your 2023 Honda Passport with the factory raised roof rails. This rack consists of the Crossbars # TH711420 and Feet # TH710401. I prefer this system as the aerodynamic cross bars have a 2 piece seal on the t channel. This allows you to easily slide channel mounted roof rack accessories into your channels without having to cut your channel strips.
The Thule One-Key System Lock Cylinders # TH450800 will allow you to secure the roof... view full answer...
The installation of a trailer hitch receiver on a 2019 Honda Passport is as simple as it gets for any vehicle and does not require any removal of any panels or fascia at all. All that is required to install a trailer hitch is lifting the hitch into place and bolt it in. This process is true of both trailer hitch receivers that fit your '19 Passport, which are:
- Curt Trailer Hitch Receiver # C13421
- Draw-Tite Trailer Hitch Receiver # 76290
Since these hitches are so similar in function... view full answer...
No, Curt trailer hitch # C13222 will not fit the 1999 Honda Passport with the door mounted spare tire, it only fits models with the spare tire stowed under the vehicle. For models like yours that have the door mounted spare you can use Curt trailer hitch # C13235.
To complete your towing set up I recommend etrailer ball mount kit # 989900. It includes 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And for trailer wiring use # 118360. I have linked a video showing how... view full answer...
There is indeed a trailer hitch receiver that fits your 2023 Honda Passport, from Curt. I verified this fit directly with the manufacturer for you, with the correct part number being the following:
- Curt Trailer Hitch Receiver # C13421
The # C13421 is about as easy an install as there is for a hitch, as all you have to do is lift it into place and secure it with the included bolts. This will give your '23 Passport a hitch with a 5,000 lb towing and hefty 750 lb tongue weight capacity... view full answer...
When it comes to picking the correct WDS you're going to need to go off of the trailer your towing, rather than the tow vehicle.
To figure out what's going to work work best, you'll need to essentially load the trailer up with everything you'd bring/need for a trip and get the trailer weighed. What we are looking for is your total tongue weight, so after it's weighed you'll need to take a note of what that is.
From here you'll just need to pick a system that roughly puts your trailer's... view full answer...
While I do not have the length of your fully-extended trunk available of your 2019 Honda Passport, there is a way you can measure to know with certainty if you can fully open your trunk with the RockyMounts MonoRail Solo Bike Rack for 1 Bike - 1-1/4" and 2" Hitches # RKY10007 attached with no bikes loaded. I confirmed with RockyMounts that the cradle sits 13 inches from the center of the hitch pinhole at 15-3/4 inches high. This is the part of the rack that determines whether you can fully... view full answer...
In order to add a 7-way to your 2019 Honda Passport you need the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector # 118291. This plugs into the OEM tow package wiring harness on your vehicle so not cutting or splicing is required. The wiring harness also comes with the fuses needed to activate the functions for the 7-way to work properly. I recommend this over other options since we have found Tekonsha to be the most reliable when it comes to wiring.
In order... view full answer...
If you were hoping for easy installs on your 2021 Honda Pilot, you are definitely in luck! To start with, the Tekonsha T-One Vehicle Wiring Harness # 118291 is a plug and play option that will be a very easy way to get a 7 Way plug, which is needed for a brake controller. Tekonsha harnesses are also the longest lived option out of all the brands we carry, so this is the one to go with. Since you have the Draw-Tite # 76290 hitch installed, all you will need to get the wiring attached to... view full answer...
The best hitch for your 2023 Honda Passport is going to be the Curt Hitch item # C13421. This hitch is custom fit and bolts to your Honda with included hardware.
I really like the Curt hitch because it tucks up underneath your rear bumper cover nicely leaving only the 2" x 2" receiver visible. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight.
I have linked a couple of pictures below along with an installation video so... view full answer...
We've got you covered! I recommend the Inno roof rack, and the parts that fit your '20 Passport are # INXB145-153, # INXS250, and # IN75FR.
This will give you a nice, durable roof rack for your 2020 Honda Passport capable of carrying almost anything you can throw at it.
If you don't already have your kayak carrier and bike rack picked out, the Malone Pilot TC # MPG2103 is a nice economical option that lets you leave your wheel on and will mount to the Rhino Rack crossbars. For the kayak... view full answer...
For your 2020 Honda Passport, you will need to use a universal fit towing mirror because there are no custom fit mirrors available for your vehicle. The K-Source Mirrors part # KS3990 would be a really great option as they fit well on mirrors like what you have, are stable, and have two mirrors on each housing for increased visibility. view full answer...
The Curt Trailer Hitch Receiver part # C13421 which is a fit for a 2021 Honda Passport requires a 22mm socket for installation. If you don't have a 22mm you can use a 7/8". We also offer socket sets with the correct size as well, the Deep Well Socket Set part # PT38VR. Please note, you'll also need a torque wrench if you don't have one already and for this I recommend the 1/2" Drive Torque Wrench part # PTW3001C. view full answer...
The Optronics HyperX LED Trailer Tail Light # STL572RB comes as a single light. You would need to order a quantity of two for a pair of the # STL572RB.
To wire it to your trailer you'll also need the 3-Wire Pigtail # A45PB. view full answer...
It sounds like there is possible some corrosion or dirt in the threads of the weldnut that is on your 1998 Honda Passport. Considering how old your vehicle is I am surprised you got one of the bolts installed without having to clean out the threads.
Check out the videos and FAQ article I attached on cleaning weldnuts that should be very helpful for you. view full answer...
We haven't gotten a chance yet to install the Draw-Tite Max-Frame Trailer Hitch Receiver # 76290 on the 2019 Honda Passport, so I can't be sure where exactly the 2" receiver sits in relation to the ground when mounted. If you have the hitch installed already you can take a measurement from the ground to the top of the 2" receiver to get your ground clearance measurement. Then it's just a matter of choosing a ball mount with a rise/drop that gets you to the desired 15" height.
If you don't... view full answer...
Go To Results