We don't have an option where it comes with both like the # C45WR, but we can still easily put this together. All you need is the Curt Ball Mount w/ Sway Control Tab for 2" Hitches # D320 and the Curt RockerBall Shock Absorbing 2" Hitch Ball # C40047. If your camper only has the mount you will also need the Curt Friction Sway Control # 17200. view full answer...
There is not a fit for your 2020 Honda Passport. I checked with manufacturers like Tekonsha and Curt and they don't have a confirmed fit for the 2019 model either. The 2019 Pilot and the Passport are not the same in their wiring.
If you already have the 7-way, I recommend the # 5506 for the wiring on your Tekonsha Primus IQ. If you don't have the pigtail use the Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long # 20127. view full answer...
While I have a great hitch option for you, there is not an aftermarket hitch available that will install behind the bumper panel like the factory hitch. But the Curt Trailer Hitch Receiver # C13421 is still going to be a great option for you that will sit just below the bumper. I have included a picture of how this hitch will look. This hitch is also made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver which is the most common size used for hitch... view full answer...