Yes, the Thule Passage 2 Bike Rack, # TH910XT, will fit on your 2008 Mercury Mariner. This bike rack has 6 straps that will attach to the top, side and bottom edges of your rear hatch. I have attached the installation instructions as well as a demonstration video for you to check out.
Since your Ladies Trek bike has a step through frame, I would strongly recommend picking up the Thule Bike Adapter Bar, # TH982XT. This adapter will attach to the handlebar post and seat post on your bike... view full answer...
Yes, the Roadmaster FuseMaster Fuse Bypass, # RM76511, will work on your 2011 Ford Edge. Using this fuse bypass will not affect the tail lights on your Edge or the tow dolly because they will receive power from the tow vehicle.
If your tow dolly does not have tail lights and you plan on using the tail lights on your Edge, then you will also want a tail light wiring kit. Use # HM56001. These wiring kits connect inline with your tail light wiring at the tail light assemblies and provide... view full answer...
The Thule T2 Pro XTR Bike Rack Platform Rack, part # TH69TX, will fit on a Class III 2-inch hitch. If you have a 2-inch hitch on your 2010 Mercury Mariner, this bike rack will work with no extra parts needed. It can be set up to hold 2 or 4 bikes as needed.
If your Mariner has a factory 1-1/4 inch hitch you can use the Thule T2 Classic 2 Bike Platform Rack, part # TH9045, which is the same style bike rack for 2 bikes, but will fit the 1-1/4 inch hitch size.
I am including links to the... view full answer...
The WeatherTech Black Cargo Liner, # WT40197, fits your cargo area behind the 2nd row (last row) of seats. The measurements are hard to be specific on because it is a custom fit product. It comes rolled up, so it is hard to measure but here is what I found.
From front to rear the mat measures 36-1/2 inches, from side to side, in the back of the vehicle, the mat measures 48 inches, and between the wheel wells the mat measures 40-1/2 inches. Again these measurements are approximate but should... view full answer...
I was unable to find what kind of clearance and recommended rim size of the 1974 Shasta Camper.
As such, I do not recommend upgrading your current rims to 15". I would suggest sticking with the 13" rims. If you let me know why you are wanting the upgrade, I can help you find what you need. For example, if it's because you want the camper to sit higher, we can perhaps make some improvements to the axle.
If you decide to stay with the 13" rims and tires, you will need to know your tire... view full answer...
The Curt T-Connector Vehicle Wiring Harness, part # 118551, will work on your 2008 Mercury Mariner Hybrid whether or not it has the factory tow package.. I am including a link to the installation instructions and a video link to the wiring harness being installed on a 2007 Mercury Mariner. view full answer...
Yes, the Thule Hullavator Pro # TH898 can fit on the Malone Square bar roof rack part # MPG201 you have on your 2006 Mercury Mariner. Thanks for the kind words on our site! view full answer...
In order to add a 7-way trailer connector to your 2008 Mercury Mariner you will indeed want to add a 4-way first like the T-One Vehicle Wiring Harness part # 118551. This is a plug and play harness that will be very easy to install. In order to then add the 7-way trailer connector I recommend using the Universal Installation Kit part # ETBC7. The universal install kit has everything you need to install the 7-way in addition to containing both 4 and 7-way connection points.
If you need... view full answer...
The wiring you will need for your 2011 Mercury Mariner is T-One Harness # 118551, which will give you a 4-way connector. To use that with the 7-way on your tent trailer you would need to use the 4 Pole to 7 Pole Vehicle End Trailer Connector # 30717, which provides connection points for both your vehicle and trailer's plugs. To mount the adapter you may want to use no-drill bracket # C57202 along with Mounting Bracket for 7-Way # 18138.
You can see how to mount this adapter in the video... view full answer...
The best way to find out if your 2006 Mercury Mariner has a factory tow package is to have the dealership run the VIN number of your vehicle. They will be able to tell you all the installed factory options the vehicle has.
If you are trying to decide if the Hopkins Wiring Harness, part # 40455, will fit your Mariner, there is another way that might help you determine if you have the factory tow package. You can look at the rear of the vehicle for the tow package connector that would be... view full answer...
The Curt Class III 2 Inch Hitch, part # 13650, will fit your 2011 Mercury Mariner. This hitch has a gross towing weight capacity of 3,500 lbs and a tongue weight capacity of 350 lbs, but you will want to check your owners manual to find out what the maximum towing capacity will be for your Mariner. I am including a link to the installation instructions on the Curt hitch.
If you will be towing with this hitch I am including a list of other items you will need.
Draw-Tite Ball Mount, part... view full answer...
Yes! The Thule OutWay Pro trunk mount bike rack, # TH45JV, is indeed a great fit for your 2010 Mercury Mariner. I have included a link to a video showing the bike rack on a similar vehicle. This rack is also available in a 3-bike version, # TH45JV.
If you will be carrying any bikes that do not have a top frame tube that goes straight across (like a typical men's bike would) I recommend using a bike adapter bar, # 64005, to carry those bikes level on the rack. I have linked a video showing... view full answer...
The Hidden Hitch Class III Receiver, part # 87585 will fit your 2008 Mercury Mariner Hybrid. The hitch has a gross trailer weight capacity of 3,500 pounds and tongue weight capacity of 350 pounds.
The Mariner may have a lesser capacity, so you would need to check the vehicle owner manual to see what towing capacities your Mariner Hybrid has. If the vehicle capacities are less you must abide by those. I have included a link to a video of the Hidden Hitch being installed on a 2007 Mariner.... view full answer...
Yes, If your 2008 Mercury Mariner has the factory cross bars that run from side to side on the top of the vehicle, the SportRack J-Stacker Kayak Carrier - Roof Mount, item # SR5511, will work on your vehicle. The J-Stacker will work on factory cross bars up to 3-1/2 inches diameter.
If your vehicle has factory side rails that run front to back, without cross bars, you will need cross bars. I would recommend the Thule Roof Rack For 2008 Mariner by Mercury, which consists of part # TH712100... view full answer...
Go To Results