Parts Needed to Tow Tent Trailer With 2011 Mercury Mariner
Question:
Great information and helpful. Thanks! What do you recommend for an electric trailer brake controller and wiring for 2011 mercury mariner without factory trailer tow?
asked by: Scott C
Expert Reply:
The wiring you will need for your 2011 Mercury Mariner is T-One Harness # 118551, which will give you a 4-way connector. To use that with the 7-way on your tent trailer you would need to use the 4 Pole to 7 Pole Vehicle End Trailer Connector # 30717, which provides connection points for both your vehicle and trailer's plugs. To mount the adapter you may want to use no-drill bracket # C57202 along with Mounting Bracket for 7-Way # 18138.
You can see how to mount this adapter in the video I've linked showing it being installed. I've also added a link to an install of the wiring harness.
For a hitch that fits your 2011 Mariner, I recommend the etrailer # e56AR. This is a Class III hitch that simply bolts on to your vehicle. You can take a look at the installation instruction that I've linked for you. Since you are going to be towing, I recommend checking out Ball Mount Kit # 989900, which will fulfill your towing needs in one tidy package; a pair of ball mounts to give you the appropriate rise or drop, a 1-7/8” ball, a 2” ball and a pin and clip. I've added a link to a video review of this kit for you to check out.
Products Referenced in This Question
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 0 - 5 Feet Long
- 4 Flat
- Plug and Lead
- 7 Round - Blade
- Tow Ready
more information >
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight
- Article: Rooftop Cargo Carriers
- Article: What Do I Need To Tow A Trailer?
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Trailer Wiring Harness for 2012 Ford Escape
- Q&A: Differences between the Curt Trailer Hitch # C13651 and # 13650 for a Ford Escape
- Q&A: What is the Difference Between a Class II Trailer Hitch and Class III Trailer Hitch
- Q&A: Adding a 7-Way Trailer Wiring Harness to a 2008 Ford E-150 Van with Factory 4-Way
- Q&A: 7-Way Recommendation for a 2009 Ford E-350 Van
- Q&A: Trailer Hitch Confirmed To Fit 2009 Ford Edge
Scott
9/11/2017
Great information and helpful. Thanks! What do you recommend for an electric trailer brake controller and wiring for 2011 mercury mariner without factory trailer tow?