The Demco Kar Kaddy SS Tow Dolly with Disc Brakes # DM9713093 does come with a manufacturers statement of origin (MSO) which is just like a title and what you will use to register the tow dolly with the state if required. view full answer...
The etrailer tow bar # e37ZR will not work with the Curt D-ring Adapters # C59JR for your 2021 Ford Bronco as they only work with Curt tow bars.
You'd need to go with the Curt Rambler # C26FR instead as it's the only compatible tow bar with those adapters. view full answer...
The best hitch for your 2024 Ford Bronco Badlands is the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR. The reason this is the best option is the extended receiver. This means you won't have to worry about clearing the spare tire when using accessories like a bike rack or cargo carrier. The hitch has a simple, bolt-on installation and comes with a lifetime warranty. view full answer...
With the Curt base plate kit that fits your 2021 Ford Bronco part # C59JR you could use the Curt Rambler Tow Bar part # C26FR which has telescoping arms that make connecting and disconnecting easier and comes with safety cables. view full answer...
From the image you attached, it the receiver hitch sets away from the bumper which is beneficial toward clearing the spare tire. I recommend the RockyMounts BackStage Bike Rack for 2 Bikes, # RKY10002. You will need to measure for clearance, please note the attached image showing 9-1/2" from hitch pin to closest part of the bike rack. Note that closest point is the swing arm, the location of the bike wheel sets back another few inches.
The RockyMounts BackStage Bike Rack for 2 Bikes,... view full answer...
Factory mounts will end up being different than aftermarket ones, so the only thing I can recommend is removing the 4 Flat mount and drilling two holes in the hitch for the Hopkins Endurance Multi-Tow # HM47180 to mount to. On the factory hitch where your 4 Flat mount is located, it is designed for holding wiring like this, but how the 7 Way will mount will end up being very low as it will hang down below the receiver opening.
What may be a better option is the Hopkins 7-Pole and 4-Pole... view full answer...
There's actually a much simpler solution for wiring your 2023 Ford Bronco with LED taillights to be flat towed with the Roadmaster smart diode kit part # RM38FR.This will wire your separate taillight circuits to function like a combined setup when flat towed which is perfectly safe, legal, and acceptable. Sometimes people do wire up their separate setups to work the same as the vehicle but it's honestly a lot more money and work than it's worth so I would not recommend that route for your... view full answer...
I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR for your 2024 Ford Bronco. This receiver has an extended receiver tube which provides better clearance between the bikes on the Rack # TH99XE and your spare tire. view full answer...
There are a couple options for extended ball mounts that fit 2 inch hitches and have extra length for clearance. You didn't mention the rise or drop you need so I'll give you a couple choices so you can find the right one:
- 1" Rise, 2" Drop - 14" Long: Brophy Ball Mount # EA20
- 3" Rise, 4" Drop - 14-5/8" Long: Brophy Ball Mount # EA40
Apart from being extra long, both ball mounts are aluminum so they won't corrode, and have an 8,000 lb towing/800 lb tongue weight rating. For a hitch... view full answer...
To flat tow your 1991 Ford Bronco you'll need to have a base plate kit installed on the front of it so that a tow bar has a place it can connect to. For that you'd want the part # 414-1 which is a confirmed fit. Then the least expensive tow bar to connect to this would be the Roadmaster Tracker part # RM-020. view full answer...
While Rhino Rack doesn't have a Pioneer Platform Yakima has a very similar option with their LocknLoad Platform that is a fit for your 2022 Ford Bronco. For that you'd need the Timberline feet part # Y00147, LockNLoad platform # Y05045, and SL adapter # Y05042 (quantity 2).
This will give you a 60 inch by 54 inch platform that is very similar to the Pioneer Platform. view full answer...
With a flat towing setup like you mentioned you won't see any vertical weight on the tow vehicle hitch since there is no weight to support. It would be all horizontally pulled weight like you mentioned. From what we know about the Torklift hitch extenders and the capacity of your 2021 Ford F-350 you should be totally fine from a capacity perspective. view full answer...
Curt has a trailer wiring harness that fits your 2021 Ford Bronco with the part # C42WR which is a plug and play style of harness but the part number you mentioned is not the correct kit to use. view full answer...
I spoke with my contact at Bestop and for the passenger side upper door of the part # B5177201 you would want # B404-52P and for the driver side you would want the # B404-51P. view full answer...
We do have some great nerf bars options for a 1987 Ford Bronco, I recommend the Westin E-Series Round Nerf Bars part # 23-0535 which have a black finish and 3" wide steps for help getting in/out of the vehicle. They feature a bolt-on install with no drilling required. The steps tie into both the frame and rocker panel which you can see in the photo below. view full answer...
The gas tank of your 1994 Ford Bronco does not need to get removed to install the Curt hitch part # C15300 that you referenced. You will need to drill to install the hitch as well. view full answer...
For your 2022 Ford Bronco base model without LED lights the Tekonsha trailer wiring harness part # TK33VR is the kit to go with. This is the easiest to install and has the most reliable converter box. I attached an install video link for more info as well. view full answer...
With the trailer only weighing 2,200lbs you'd be looking at roughly a 220lb tongue weight if the trailer was fully loaded. I have two different trailer dolly options depending on your needs. If you want a standard no-frills option the Flint Hill Goods Trailer Dolly # FHG24ZR is the correct choice for you. If you would the the ability to hook up to an ATV, lawnmower, golf cart, etc. then the Flint Hill Goods Trailer Dolly # FHG84ZR is the correct choice for you.
We had both of these down... view full answer...
The first component you'll need to flat tow your 2023 Ford Bronco is a base plate kit like the part # RM79RR which connects to the vehicle frame to provide a connection to the tow bar.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For... view full answer...