All of the Atwood surge brake actuators and their replacement parts are no longer available. The only and best solution (since they weren't designed well) is to replace the entire actuator with a better model. The Titan actuator part # T63FR is a great option that would work well as a replacement for your drum brake setup. view full answer...
For your 2017 Hyundai Santa Fe if you didn't have the factory tow package you would need a universal install trailer wiring harness like part # C59236. If you did have the tow package the correct harness fit you would need is the # C56332 which I attached an install video for. view full answer...
For a 4-way trailer wiring harness that is a confirmed fit for your 2017 Hyundai Santa Fe Sport the T-One kit part # 118571 is a confirmed fit and would work well. view full answer...
I looked at some pictures of the 2016 Hyundai Tucson roof and it appears that you would be able to place the SeaSucker Roof Bike Rack for Trikes # 298-BD1005 so as to avoid those raised sections in the roof. The larger two sections of this system measure 13 inches long and 6 inches wide. They will mount to the roof long ways so you can measure the space you have between those raised sections in the roof as well as the width between the rear wheels on the trike (measured from the center... view full answer...
I really wish we had a fit for you vehicle, but since you have the 1.6 liter we do not have a confirmed fit yet for a block heater (as of January 2018) so best option we'd have would be a heated dipstick like part # KH15200. view full answer...
I have a solution for you, but the Swagman XTC2 TILT Bike Rack for 2 Bikes # S64671 and Curt 2 Bike Platform Rack # C18085 you were looking at are both frame-mount and are not recommended for carbon fiber frames as they could potentially scratch the frame. Instead, you will want to go with a wheel-mount bike rack like the Yakima HoldUp EVO Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount # Y02480.
This carrier fits wheelbases up to 48" which is large enough for your Bacchetta CarbonAero... view full answer...
Either the Draw-Tite Sportframe Trailer Hitch Receiver part # 24963 or the Curt Trailer Hitch Receiver part # C11486 will fit onto your 2019 Hyundai Ioniq Non Electric/plugin with no additional accessories. I recommend Draw-Tite # 24963 as it not only looks very low profile when installed with only the Receiver showing as shown in the picture I've attached, it also can be used without a support strap where the Curt # C11486 recommends using Curt Cam Buckle Stabilizing Strap # 18050 when... view full answer...
For your 2022 Hyundai Tucson Hybrid with a panoramic roof and flush-mounted rails, a great cargo carrier is the Thule Force XT - 16. cu. ft. # TH6357B. The Force XT comes with a dual-opening lid that can be accessed from either side for loading/unloading convenience. Also, the Quick Grip mounting clamps are super easy to use and allow you to attach the box to your crossbars in about 5 minutes. It already comes with locks, so you do not need to worry about purchasing additional components... view full answer...
The trunk-mount bike carrier I recommend for your 2016 Elantra GT is the Thule OutWay, part # TH45JV.
This is a 2-bike carrier and uses only 2 retractable cables to hold the bike securely to your Elantra. The bike carrier also comes with locks that secure the bikes to the rack and also secures the carrier to your vehicle.
If you are planning on carrying bikes with alternative frames like kids bikes or women's bikes I recommend using an adapter bar like part # 64005. This attaches between... view full answer...
Class S tire chains are chains that require less than 15mm of clearance between the chains and any part of the vehicle once the chains are installed. I checked the 2007 Hyundai Santa Fe owner's manual and found that Class S chains are required. Also, on all-wheel drive models like yours the manual states to use chains on all 4 wheels.
It looks like there were at least 3 stock tire sizes that could be on your Santa Fe. If it has 225/70-16 tires then for Class S Thule chains you can use... view full answer...
I checked around and found that the Thule Canyon roof basket # TH859XT-8591XT will fit the roof rack crossbar spread of 38 inches on your 2014 Hyundai Santa Fe. view full answer...
Given the 3500 lb GVWR of your 2016 Starcraft AR-One Series M-16BH travel trailer, your trailer tongue weight would sit at about 500 lbs at the very most, likely in the neighborhood of 400 lbs.
Since travel trailers are especially susceptible to trailer sway caused by crosswinds and turbulence from passing and oncoming traffic., you'll definitely want to use a weight distribution system with sway control like the Curt # C17063 you'd looked at, but I'd recommend a system with an integrated... view full answer...
The trailer hitch that I recommend for a 2019 Hyundai Santa Fe (All Models) is the etrailer Trailer Hitch Receiver part # e98843 which features a simple bolt-on install with no cutting or drilling required. It has the very capable class III rating with 2" receiver tube opening. In regards to the trailer wiring, the T-Connector Vehicle Wiring Harness part # CU94FR is what I recommend as it's plug-in-play. The etrailer Ball Mount Kit part # 989900 can then be added for a complete towing setup. view full answer...
Fortunately, we do carry roof rack systems that are compatible with your bare roof on your 2020 Hyundai Palisade. For this system, I recommend the following parts:
- Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422
- BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06145
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138
- (Optional for extra security) Yakima... view full answer...
For your 2019 Hyundai Santa Fe I recommend the Curt Class III Trailer Hitch # C13195 because it features the highest tongue weight capacity and is made right here in the USA.
This custom hitch will install using existing holes in your Santa Fe's frame for a no-drill installation. It has a 5,000 pound towing weight capacity and a 750 pound tongue weight limit. I have included the written installation manual that you can take a look at as well.
Then for trailer wiring the Curt T-Connector... view full answer...
The 2016 Hyundai Elantra GT has a bare roof so I am not sure I understand what you are referring to as the existing rails but if you can send me a photo I would be glad to clear that up for you. If you are referring to the moulding (see photo) then I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00425, part # Y53TR, and part # Y00248.
I like the JetStream system because it has aero shaped cross bars that are both wind resistance and less noisy than a... view full answer...
Your Starcraft camper appears to have standard roof tracks that would allow fitment of Rhino-Rack or Thule towers and crossbars. Both Thule and Rhino-Rack use the same size roof tracks which measure about .8 wide inside the channel and about .5" wide inside the top section of the channel (see attached photo).
If your measurements are the same then you can install a Thule or Rhino-Rack roof rack. I recommend going with Rapid Podium Feet # TH460R, Fit Kit # THKIT3101, and 60" Thule Wingbar... view full answer...
You are correct that there is unfortunately not a trailer hitch available that will fit the Sport model of your 2019 Hyundai Elantra. It does look like it's the slightly different exhaust design on the Sport model that prevents a fit with the trailer hitches for the base model Elantra.
There is a chance that a hitch might become available for the Sport model but there is not one for the 2018 Elantra GT Sport either, which means it is pretty unlikely.
If you are looking to transport... view full answer...
Help is to the rescue! I went ahead and looked up your tire specs in the owner's manual of your 2014 Hyundai Santa Fe, and the manual states that you can either use front chains only or all 4 tires for your all-wheel drive model.
For standard 235/55-19 tires, the manual recommends using tire chain thickness less than 15mm. For affordable chains that fit these specs, I recommend the Titan Chain Snow Tire Chains - Ladder Pattern - V-Bar Links # TC2819. These economical tire chains have the... view full answer...
Curt does make really great trailer hitch and we do recommend them highly. We have a fit for your 2020 Hyundai Palisade too with the part # C13427 but the part number you mentioned is not a fit. This is a mostly hidden trailer hitch with plenty of towing capacity. Check out the install picture and video link I attached to this page as well.
For trailer wiring the easiest to install option is the part # CU94FR.
If you wanted to do some towing you might be interested in etrailer ball mount... view full answer...
Go To Results