I am not aware of that restriction either but I can say that if Yakima (the source) says it's for sure not a thing then you can use anchor mode with the Yakima FullBack # Y02634 and it would have the full 70 lb capacity. view full answer...
The Curt alternative to the Tekonsha # 118758 that I initially recommended for your 2019 Hyundai Ioniq Plug-In Hybrid is the part # C56381. Some of the Curt and Tekonsha wiring are comparable but with your vehicle Tekonsha is using their upgraded module which is why I recommend going that route instead.
The Curt Auxiliary LED Indicator Lights # C53201 is just for the running, stop, and turn signals so you'll need to cut and splice the wiring that comes with the Thule License Plate Holder... view full answer...
Since you have the electric version of the 2018 Hyundai Ioniq the only solution we have for carrying bikes will be with a roof rack since none of our hitches are a fit and we also do not have any trunk racks.
So for a roof rack we have the Yakima CoreBar Rack part numbers # Y00421, # Y28TR, # Y06175, and # Y06111 which is a confirmed fit and would work great. These bars are aero shaped so you'll have minimal wind noise and this rack is very easy to install as well.
Then for bike racks... view full answer...
We do!
I recommend picking up the Tekonsha T-One # 118758 for your 2019 Hyundai Ioniq Plug-In Hybrid and securing it by your hitch receiver with the mounting brackets # C42CR and # 18140 so the 4-Way is easily accessible.
If you have the Thule Epos bike rack then you're needing the License Plate and Tail Light Kit # TH79XE, otherwise I recommend going with the Curt Auxiliary LED Indicator Lights # C53201 since they come with an adhesive that makes them quite easy to install.
If you don't... view full answer...
The best option for a trailer hitch receiver for your 2019 Hyundai Ioniq so you can use a bike rack is from Draw-Tite:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24963
The reason the Draw-Tite is the top option for your '19 Ioniq is because it provides the best clearance from your bumper so your bikes stay safely away from your vehicle, and because it is a no-drill install with a concealed crosstube so just the receiver is showing. That will help your Ioniq retain its factory appearance,... view full answer...
The Yakima FullBack trunk mount bike racks have been confirmed to fit your 2022 Hyundai Ioniq:
FullBack
2-Bike - # Y02634
3-Bike - # Y02633
I personally like the FullBack better simply because it comes with the bike and rack locks. Aside from that and the color these bike racks are virtually the same. You will want to position the bottom of the rack 2-3/8" above the top of your bumper and set the hub to "2" for your installation. Yakima also states to use the anchor mode. I'm attaching... view full answer...
You can definitely carry a bike with your 2020 Hyundai Ioniq plug-in, but trailer hitches, including the one you referenced, require specific frame mounting points as well as the room needed under the vehicle for a hitch to mount. An Ioniq plug-in does not have the needed area to mount a hitch, so in order to carry a bike, you will need a trunk-mounted bike rack.
The trunk-mounted bike rack that is confirmed to fit your 2020 Hyundai Ioniq is the Yakima FullBack 2-Bike Rack # Y02634.
Aside... view full answer...
The 2 inch hitch size is only available for vehicles with higher towing capacities like SUVs, trucks, and vans. Since your 2020 Hyundai Ioniq is a lighter duty vehicle you'd only have option of a 1-1/4 inch hitch like the Curt # C11486. I attached an install video for this for you to check out as well. view full answer...
The A-Frame Trailer Coupler # CA-5210-B will have the exact same yoke latch as your current Ram coupler, so it will not be adjustable, unfortunately. With that said, if you were over doing the weight capacity and can swing the Dutton Lainson A-Frame Trailer Coupler # DL14008 with 5,000 pounds of capacity, it will have the adjustability you are looking for.
If you do need more capacity than that though, your best option will be the Demco A-Frame Trailer Coupler # DM14791-97. This is actually... view full answer...
The hitch I recommend for your 2020 Hyundai Ioniq is the Curt hitch # C11486 as it has the highest quality powder coat finish and also is mostly hidden since only hitch opening hangs below rear bumper.
For a hanging bike rack that will work great with the Curt # C11486 hitch on your Ioniq I strongly recommend the Kuat Beta Aluminum Rack # B202-114 because it is an easy to use, is very stable, and is also incredibly lightweight.
The Beta weighs just 12.6 lbs! view full answer...
The best option for a hitch would be the Draw Tite # 24963 which is a confirmed fit and will work well. I prefer this over the Curt equivalent as it does not require a stabilizer strap when carrying a non-supported load like a bike rack.
I really like the Saris Freedom Superclamp part # SA4025F. This is a lightweight platform rack (which is normally an unheard of combo). That means it'll be easy to install and remove from your vehicle since it's light, but also it'll be very easy to load... view full answer...
Yes, you can replace the hub and brake components of a Dexter 10k axle with drum components to convert it to electric drum brakes. For that you'd need the hub/drums part # 8-430-5UC3 and then for the brake assemblies # 23-450-451 and you'd be set in that regard. You'd need to run 10 gauge or thicker wire to each assembly which we offer with the part # 10-1-1. view full answer...
The Draw-Tite # 24963 Class-1 hitch you prefer will bolt onto a non-electric 2017 Hyundai Ioniq. However all Class-1 hitches are limited to racks for 2 bikes. The Yakima RidgeBack that you selected is a Class-2 rack and will not work with Class-1 hitches. There is not a Class-2 hitch available for your Ioniq. With this in mind you could use the Thule # TH934XTR Class-1-2-3 bike rack that will let you carry 2 bikes on your Ioniq, but also work with 4 bikes when attached to a vehicle with... view full answer...
If you're able to remove enough weight from the bike to get it below 35 lbs, I think the # S64650 Swagman XC you referred to would work capably for you. The extra precautions and straps you mention would be an excellent idea.
However, looking at things from a long-run perspective, this rack might not be the best choice for you, even though it's at an attractive price point. The XC isn't the first rack I'd recommend for long trips or frequent moderate trips. It's best use is for occasional... view full answer...
For your 2017 Hyundai Ioniq the Curt Trailer Hitch Receiver - Class I # C11486 is a confirmed fit unless you have the all electric model. There is not a trailer hitch that will fit the model that is all electric, but the hybrid models have a fit.
With that hitch, the installation requires some underbody panel trimming but utilizes weldnuts already in the frame. I've attached an article to assist.
The Thule Helium Pro 2 Bike Rack # TH9042PRO has a locking knob that will not fit with... view full answer...
For your 2019 Hyundai Ioniq the hitch I recommend is the Curt part # C11486 to carry your bike rack. This hitch has more than enough capacity for a 2 bike rack like the Thule Camber # TH9058 and was made in the USA so it's a really great option. Only the hitch opening hangs below the rear bumper too which makes it less visible as well. I attached a picture of it installed as well as an install video for you to check out too. view full answer...
The best option we offer for carrying an e-bike on a 2018 Hyundai Ioniq is with the Thule EasyFold XT Bike Rack for 2 Electric Bikes part # TH903202. This rack is class I rated which you will need for this vehicle and can hold a bike up to 65 lbs. Therefore, it sounds like you might need to remove the battery to get it under this capacity as there are no other higher rated options for this hitch class due to the design of the vehicle. If you don't already have a hitch I recommend the Curt... view full answer...
If there is enough demand then the hitch manufacturers will make a hitch for the electric version of the 2017 Hyundai Ioniq. But as of right now I have not heard of one in the works. Right now the only way to carry bikes on your Ioniq is a roof rack.
The most cost effective option is a Yakima rack using the following parts:
CrossBars # Y00408
BaseLine Towers # Y28TR
RoundBar SL Adapter # Y03536
BaseClip Fit Kit (front) # Y06175
BaseClip Fit Kit (rear) # Y06111
Then you could add a bike... view full answer...
I have another option for you to carry your bikes, but unfortunately there is not a trailer hitch receiver confirmed to fit your 2019 Hyundai Ioniq EV due to the differences in the rear of the vehicle to accommodate the batteries.
Instead I recommend taking a look at the Yakima FullBack 3 Bike Rack - Trunk Mount - Adjustable Arms # Y02633 which is a confirmed fit for your Ioniq and will allow you to transport 3 bikes weighing up to 35lbs, but no more than a combined weight of 90lbs.
I... view full answer...
If your 2018 Hyundai Ioniq Hybrid isn't one of the plug-in hybrid models the hitch # C11486 would fit and work great. If it's a plug-in we do not have any solutions. This would work great with a bike rack like the Hollywood Racks Trail Rider # HR200Z. view full answer...
Go To Results