The Curt Front Mount Trailer Hitch Receiver # C52NR does have a gloss black powder coat finish. This is confirmed to fit your 2024 GMC Sierra 2500. view full answer...
Although there isn't a plug and play harness available, wiring up the # TLL12RK taillights to a trailer harness like # A10-4225VP would be extremely easy, as you can see in the provided video where my buddy Jake shows how the harness is installed.
The wiring pigtails included with the # TLL12RK would connect as follows:
• Red wire on pigtail connects to green wire on right side, yellow wire on left side
• Black wire on pigtail connects to brown wire on both sides
• White wire grounds... view full answer...
The weight of the MORryde RV Cargo Sliding Tray - 72" x 52" - 2 Way Slide part # MR82FR is around 150 lbs. If you're looking for a lighter option, the MORryde RV Cargo Sliding Tray - 72" x 36" - 2 Way Slide part # MR58FR is a bit smaller and only weighs around 120 lbs. view full answer...
The VanTred Custom Floor Mat for Cargo Vans # VTRG96 would allow totes with casters to roll around easily so you'd need to lock the casters or find a way to hold the totes in places with a strap or bungee cord. Since this mat has a closed cell polypropylene layer to cushion the top you'll also see tracks wherever the totes sit and roll, depending on how heavy they are. view full answer...
While I can give you the height of the Thule roof rack above the roof of your 2023 GMC Sierra 2500, I don't know how much height the cantilever of the ladder rack adds, so you'll need to measure how high above your roof it is and compare that with the Thule roof rack.
For the rack, from the roof of your '23 GMC Sierra 2500 to the top of the crossbar you'll be adding 5-1/2 inches when it is installed, so that should tell you if the height is approximately the same or not. The parts that... view full answer...
The Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate # VGM-07-4000 doesn't have to be locked in order to drive around, it's just recommended to lock it because it installs and removes so easily that someone could take off with it in just a few minutes.
There are latches on both ends of the tailgate that match the ones on your factory tailgate and hold it in place. The center release mechanism that includes the lock would have to be physically turned to release the latches and... view full answer...
Yes, the 13,500 Btu Advent Air RV Air Conditioner with Air Distribution Box and Start Capacitor # ACM135C (White) or # ACM135BC (Black) will cool your enclosed trailer. These are ductless systems as I assume your trailer does not have ducts. That said, it will essentially need to always be on so you do need to monitor your generators and be sure they are full.
For generators I recommend the etrailer 4,500-Watt Portable RV Generator - 3,600 Running Watts - Propane or Gas - Electric Start... view full answer...
The Aries # AAS2891 Oval Nerf Bars do not include the mounting bracket/hardware, nor do we carry an Aries a 6 inch oval Nerf bar/bracket kit exactly like the # AAS2891 that would fit a 2020 Sierra 1500.
I'd recommend the # AA97FR for the extended cab model (what GM refers to as the Double Cab) or
# AAAL234053 for the Crew Cab model. view full answer...
We do not have a cross reference for OEM's travel trailers that would identify your pin box brand or model. You could call the manufacturer with VIN and ask them or because this is a brand new trailer, or call the dealership you bought it from.
Please also note the attached article below that will tell you all about pin boxes and how to measure the bolt pattern, you can then determine what replacements work from using this to identify what you have.
For example, if your bolt pattern matches... view full answer...
From my research it looks like the GVWR of the 2018 Forest River Work and Play you were referring to is 11,300 lbs so the GVWR of the trailer and golf cart you wanted to haul would need to be less than 1,200 lbs (due to the 12,500 lb towing capacity of your truck).
That seems unlikely, and you would also need to stay within the tongue weight rating of no more than 1,500 lbs, which is something you would only be able to find out once the trailer(s) are fully loaded either by using a scale... view full answer...
The Longview Towing Mirrors, part # CTM1600 are fully adjustable. Typically, the OE mirrors on a vehicle drivers side are flat and the passenger side is convex.
According to Longview Mirror, the driver and passenger side slide on towing mirrors are constructed of flat glass, neither concave nor convex.
To see a product demonstration video featuring the Longview slide-on towing mirrors, click the provided link. view full answer...
HappiJac Electric Truck Camper Jack System # LC736514-ELKIT
1) The outer tube length is 51"
2) The L and Z support brackets are 16" and the shorter brackets are 5"
3) They are sold individually. Replacement Jack for HappiJac Truck Camper Jack Systems # LC736514 (price is on the product page view full answer...
Thank you for your purchase from etrailer of the Curt Echo In-Line Wireless Brake Controller # C79DR. The blue light will indeed turn off and not stay on the entire time, so it won't drain your battery. view full answer...
The Curt Front Mount Trailer Hitch Receiver part # C31074 which is a fit for a 2022 GMC Canyon won't change the ride height at all but it will change your ground clearance by a bit because you now have a receiver under the bumper that hangs down a bit lower than the skid plate. That said, I don't think is enough to really cause any issues.
The weight of the front mount hitch is about 35 lbs. view full answer...
The Power Watchdog Surge Protector with Bluetooth, # HU97FR is a 30 amp surge protector that has a free Smartphone app for iOS and Android. It will connect via Bluetooth to monitor your volts, amps, and watts in real time to keep an eye on your power draw and provide push notification when voltage is outside of acceptable, customizable ranges. It does not allow you to disconnect remotely. But if an unsafe power reading is detected it will automatically shut down the input power to protect... view full answer...
To determine the size of your truck bed, you will want to measure the inside of the truck bed from front to back. Most accessory companies round off their measurements to the nearest half-foot so your measurement may not exactly match the options that we have listed.
The GM Cargo Management System is a rail system which runs the length of the bed sides and behind the cab.
The BedRug Custom Full Truck Bed Liner, # BRC07CCK, that we offer is made to fit a 5-1/2 foot bed without the Cargo... view full answer...
The TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 4 Steps - 25-1/2" Base - 375 lbs # TLA8104 is their part number A8104. I don't know where you are seeing their pricing but I couldn't find it online to compare. We get our pricing directly from them, so we are offering the best price we can. I wonder if the difference is in shipping or if they are not including the Landing Gear, but can't confirm.
As far as the SafeStep Vinyl Barrier for TorkLift GlowStep Scissor Steps... view full answer...
The TracRac Sr ladder rack that is designed to fit your Sierra 2500 if it has a 6-1/2 ft bed is part #TH43002XT-781. If you have an 8-ft bed on your truck then part # TH43002XT-780 is what you need.
We do not offer shorter uprights that will fit in the base rails of the ladder rack. The height of the crossbars with the base rails is 27-5/16 inches.
Another possibility is the Thule Xsporter Ladder Rack, part # TH500XT. This does not have the sliding feature but it is height adjustable... view full answer...
Typically, a trailer equipped with electric brakes will have either a 6 or a 7-way trailer connector. The 7-way is the most common. If you click the provided link, you can see side by side photos of both connectors.
A 4-pole or 4 wire connector like you describe would only provide trailer lighting functions.
If your trailer has electric brakes, and you want them operational, you will need to install a brake controller. The Tekonsha Prodigy P2, part # 90885 would be an excellent choice.... view full answer...
The tow mode switch on your shifter is designed to change the shift points of the transmission and makes the shifting a little quicker and harder and it is recommended that it be on when towing a trailer. It will downshift faster when going up a hill when towing and will use engine braking when going downhill.
A transmission cooler like the Derale Combination Transmission and Engine Oil Cooler, part # D15902 serves two purposes.
It is divided in to two sections. It has and inlet and... view full answer...
Go To Results