The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13093 is a confirmed fit for your 2016 Chrysler 300 and is also a fit for a few other models like the Dodge Charger and Dodge Challengers of certain model years. The towing capacity of your vehicle is 1000 lbs as you mentioned, and it is not uncommon for trailer hitch receivers to be rated much higher than the vehicles they are made to fit. This is the case of your vehicle and hitch receiver but the hitch manufacturers... view full answer...
The top of the receiver tube for the Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames # UF35-946403 that you mentioned sits level with the bottom of the brackets that mount to the underside of your trailer frame so you will want to use the Curt option for your setup.
The Curt option, part # 13703, has a measurement of 8-1/4 inches from the beam to the edge of the hitch receiver and a measurement of 2-3/4 inches from where the beam inserts into the bracket to the edge of the bracket... view full answer...
The WeatherTech Side Window Air Deflectors, # WT82476, include deflectors for the front and rear driver's-side and passenger's-side windows of your 2014 Chrysler Town and Country.
The deflectors for the front windows are actually longer than those for the rear doors due to the fact that they line more of the window. For the front windows the deflector begins near the side mirror and then runs across the top of the window where as the deflector for the back window just runs the top of the... view full answer...
The outer diameter of the cross tube on the etrailer.com Trailer Hitch Receiver part # e98903 which is a fit for a 2017-2019 Chrysler Pacifica is 2.5". view full answer...
Though I can provide the distance from the center of the pin hole to the closest edge of the bumper on the hitches we have installed, I cannot on the one we have not. This is the Curt Class II # C12180, unfortunately. That being said, the measurements for the rest of the hitches that fit a 2021 Chrysler Pacifica are 5 inches for the etrailer.com Class III # e98903 and 6 inches for the Curt Class III # C65CR. view full answer...
As long as your 3 mountain bikes remain under the 105 lb weight capacity of the Thule Passage 3 Bike Rack, # TH911XT, you will have no problem carrying them on your 2010 Chrysler Town and Country. As a safety tip, I recommend putting the largest/heaviest bike closest to the vehicle.
One thing to keep in mind is that mountain bikes can often have large frames and mounting three of them on one bike rack can be troublesome. I would recommend looking at the Thule Gateway 3 Bike Rack, # TH78VR.... view full answer...
Whenever you will be adding extra weight from a trailer or hitch mounted accessory it is always important to refer to your owner's manual to ensure that you are not exceeding the weight capacity. It is also necessary to note that your weight capacity will either be limited by your vehicle or the trailer hitch, whichever has the lower rating.
I looked up the owner's manual online for your 2016 Chrysler 300S and it states on page 457 that you have a max Tongue Weight (TW) rating of 100 lbs.... view full answer...
The distance from the center of the hitch pin hole of etrailer.com Trailer Hitch Receiver # E98854 to the edge of the rear fascia (or the edge of the rear bumper) on your '10 Town and Country is approximately 4 inches.
For wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # 118552. I also recommend checking out Ball Mount Kit # 989900, which is for 2” hitches and may fulfill your towing needs in one tidy package; two ball... view full answer...
According to the manual for the Jensen LED Television with DVD Player # JTV1917DVDC, which I have sent to you, the power consumption is 28 watts. This LED television is 19 inches, HD ready, and comes with a tabletop stand and wireless remote control. It also has a VESA 75mm x 75mm mounting pattern if you want to mount it on your wall. view full answer...
When we installed the etrailer hitch part # e98903 on a 2017 Chrysler Pacifica we found that from the top of the hitch opening down to the ground the distance was 13 inches. You need to measure from the bottom of your coupler lip when the trailer is level down to the ground. The difference between these two dimensions is the rise/drop you need. view full answer...
Yes, the Replacement Awning Extension Rod for Solera Slide-Topper Awning # LC3452072 that you referenced measures 3/4". I actually recently took this same measurement for another customer for the white version part # LC3452071 and I'm attaching the dimensional photo for you to reference. view full answer...
The rise is the distance from the top of the shank to the top of the ball platform, with the ball mount in the position (rise) it will be used in. I am including a link to a FAQ page that will describe how to measure and choose the correct ball mount.
The 2004 Chrysler PT Cruiser uses a Class I 1-1/4 inch hitch. All Class I hitches have to use the ball mount that is recommended from the manufacturer.
The Draw-Tite Ball Mount, part # 3593, is the ball mount that is recommended for the... view full answer...
Depending on the size of the engine on the wave runner, a single wave runner and trailer can weigh between 700 and 1000 lbs. Although the Curt Class I receiver you mentioned has a 2000 lb towing/ 200 lb tongue weight capacity, you still must abide by the towing capacity of the vehicle. From what I have been able to determine, your PT Cruiser has a towing capacity of 1000 lbs. You will want to consult the owners manual to confirm this.
If the weight of your wave runner plus the weight of... view full answer...
The air lines of the Air Lift Load Controller Compressor System for Air Helper Springs # AL25856 are 1/4 inch.
It is highly recommended you use the Air Lift Air Hose Cutter # AL10530 for the air lines to get the most concise cut of the lines. view full answer...
When we installed the Curt hitch part # C12264 on similar 2011 Chrysler Town and Country we found that from the ground to the top of the hitch opening the distance was 11 inches. view full answer...
I contacted the manufacturer that assembles the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 Item # C12064 and they informed about the true measurements.
The hitch measures 9.56” from the frame rail to the bottom of the receiver tube. There are 6 mounting holes on the hitch, 3 on each side. Center to center on the two mounting holes closest to the rear of the vehicle is 42.25”. Center to center on the pair of mounting holes towards the front of the vehicle is 40.94”.
Although... view full answer...
In regards to the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76145 which is a confirmed fit for a 2018 Chrysler 300 (All Models), the mounting holes are about 41" apart on center which I think is what you are asking for. If not, please just let me know but I have also attached a dimensional drawing for you as well. view full answer...