Distance from Ground to Top of Curt Hitch Opening for 2012 Chrysler Town and Country

Question

Question:

I need an accurate estimate of the approximate height from the ground that the center or top of the C12264 hitch receiver would be on a 2012 Town and country Touring vehicle. Thanks

asked by: Dave H

1

Helpful Expert Reply:

When we installed the Curt hitch part # C12264 on similar 2011 Chrysler Town and Country we found that from the ground to the top of the hitch opening the distance was 11 inches.

expert reply by: Jameson C

1

Answer 1

The correct Curt Class II hitch that fits your 2012 Chrysler Town and Country Touring with a 3.6 liter engine is the part #C12264. There isn't any frame modification required to install this hitch on your vehicle. Then for trailer wiring the Curt…

view full answer...

Answer 2

We have actually installed both Curt Trailer Hitch Receivers, parts #C12264 and #13364, as well as both Draw-Tite Trailer Hitch Receivers, parts #36455 and #75579, on similar 2012 Chrysler Town and Countrys. Out of all 4 of those choices the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Distance from Ground to Top of Curt Hitch Opening for 2012 Chrysler Town and Country

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching