Open Snap Bushing - 1/2" Diameter Mounting Hole - Qty 1

Video Transcript for Spectro Wiring SWC8075-1 Review

Today we're taking a look at an open snap bushing. The open snap bushing converts raw, edge metal holes to smooth, insulated holes. It does the have the split design right here which provides side entry for segments larger than the bushing in diameter. It's an easy installation, just install in holes with existing cable runs or tubing. Or if you want to cut a new hole, you just need to make sure it's a half inch diameter because this is designed to fit into a half in diameter mount hole. The push back force is 35 pounds, it's made from a durable plastic construction, with this part number you get one snap bushing.

Again, it fits into a half inch diameter mount hole, and when it comes to the dimensions of this bushing, inner diameter when installed is five sixteenths of an inch. The head diameter, which is this area right here this visible portion, it's a little bit thicker. Edge to edge that's nine sixteenths of an inch in diameter, and the overall length that's measuring basically from this end to this end is thirteen thirty-seconds of an inch long. That's gonna do it for today's look at the open snap bushing.