T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(363 reviews)
Price: $41.70
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118425
Retail:$45.66
Our Price: $41.70
You Save: 9%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (363)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118425
- Trailer Hitch Wiring
- 4 Flat
- Custom Fit
- No Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind tail lights
- Plug in T-connector
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. If extra length is needed, you can cut the zip tie on the passenger side harness.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
118425 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118425
Average Customer Rating: 4.7 out of 5 stars (363 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Jacob 05/11/2023
Great service, products works great. Had to remove 1 zip tie to gain the length needed to get to both tail lights. Follow the path of the vehicle wiring and the wiring tucks nicely.
by: Tom 12/29/2023
The wring harness was very easy to install. It is working just fine after one year. I was careful upon installation to make sure no wires would hang down creating an opportunity to get snagged. We hunt with our vehicles so often time we will be in a harvested field driving.
by: Peter M11/10/2016
2012 Jeep Grand Cherokee
Perfect product and transaction all around!! Other reviews said wiring was a bit short but cutting a zip tie would help wire length. Worked perfectly. Install was a breeze and went just as smooth as the video provided for my Jeep. Also bought the trailer hitch as well. Installing both took less than 30 mins. If, like me, you were worried about quality because the price is so low. Worry not!!! The quality is there. The inflated price is not. Welds on hitch are good and powder coating is flawless. Wiring is plug and play. (pun intended) If your thinking about buying. STOP. Just buy it and you will be as pleased as I was. ~2012 Jeep Grand Cherokee~
by: Alan06/16/2018
2012 Jeep Grand Cherokee
I ordered this harness for my Grand Cherokee and couldn't be happier. It came within a few days choosing economy shipping and the installation was ridiculously easy. There is even an online video with step by step instructions for this exact product. I completed the install myself in under 30 minutes. Did a brake/signal check and everything worked perfectly. Great product, great service. Very happy with this purchase.
by: Paul07/15/2022
2011 Jeep Grand Cherokee
Very dissatisfied with the wiring harness. Way too short. A number of your reviews indicated that this. We had to splice a number of wires. Your solution was to cut the small zip ties on the wires. We did that. Still too short. Probably will not use this product again.`
by: Tom01/03/2020
2009 Jeep Grand Cherokee
This is GREAT !
everything including wiring harness was a perfect fit. It took me 1 hour and 15 min start to finish for install.
Well done Etrailer
by: Tim R.07/10/2013
2009 Jeep Grand Cherokee
Everything fit as it should. The connectors could be a bit more sturdier. Very delicate plastic.
by: Bradley A06/07/2018
2010 Jeep Grand Cherokee
Wiring harness was so easy to install, it took me less then 30 minutes to get it installed! Way cheaper then uhaul charges! Very happy.
by: Jeffrey 05/27/2023
Jeep Grand Cherokee
It was super easy to install this trailer light setup on my Jeep Grand Cherokee. Works perfectly and have had no issues with it.
by: Hugh Baugus03/25/2017
2007 Jeep Grand Cherokee
Product was super easy to install I've sent a pic of the hitch installed my Jeep is a work in progress thank you for a great product.
Hugh
Hugh B.
3/25/2018
awesome love it!!!
by: Michael11/04/2022
unit did not fit had to add wire so it would reach from tail light to the other. And this was the second harness I ordered the first one was totally wrong
Jenny N.
11/8/2022
It can seem like that there is not enough wire in the harness. To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.
by: Brandon06/03/2018
Jeep
Buying from etrailer was very easy and got my order very quick. Website helped ensure that hitch and wiring fit my Jeep. The hitch looks really good and installation was simple. Definitely recommend etrailer!
by: Don D.04/23/2017
Hello Mr. George J (etrailer.com):
My experience with etrailer.com was GREAT!!! I purchased a Draw-Tite Trailer Hitch Receiver, T-One Wiring Harness and Four Pole Bracket. Your website, instructions, sales, and shipping were Top Shelf!!!
Many thanks for the GREAT Service!!!!!!!!!!!!!
Sincerely,
Don D.
Waterford, Connecticut
Don D.
4/25/2018
Hope all is well with you and your team at etrailer!!! The three trailer items I purchased from your company are working GREAT!!! The items are of very good quality and they were priced appropriately. Also, thank you for continuing to send me product updates. Very helpful!!! Thanks for the Great Service!!!
by: Andre F05/12/2015
2007 Jeep Grand Cherokee
Good product with quality connections. My only negative comment is that the wiring could be about 2"-4" longer for my application (2007 Grand Cherokee). The wires were just too short in overall length and made the installation longer than it needed to be. I did get it in, but almost had to remove the rear bumper to make everything fit perfectly. All in the harness works great - install was just a pain as things were tight.
Andre F.
5/11/2016
Works fine - Couldve been 4 longer so it would give a smidge of slack. Pain to install
by: Max07/31/2017
2011 Jeep Grand Cherokee
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118425 came exactly as advertised and installed exactly as shown in the instructional video. Great product, fast service and delivery, liked the email updates on shipping and delivery...
Max
7/31/2018
There has been no issues with the product...still working exactly as it did on the first day.
by: Austin G03/09/2017
2010 Jeep Grand Cherokee
The delivery was fast, took it less than a week to come in. This product was so easy to install. It took me an hour to put the hitch and wiring harness in my 2010 Jeep Grand Cherokee. I haven't got to pull anything with it yet but as of right now I think it's a good product.
by: Layne01/27/2024
came 3 days early
by: Lanier06/21/2019
Have Jeep Grand Cherokee and have added an etrailer hitch. This wiring harness will complete the project allowing use of utility trailer. Like the fact that no wiring has to be cut or tapped to install. Perfect for my use.
Lanier
6/22/2020
Still works exactly as expected. Usage down during Covid-19 situation.
by: Todd S.03/17/2014
Honda Pilot
Easy to install, works great. Suggestion: watch the video rather than use the included instructions, if possible. The instructions are fine, but the video shows where to route the wires through the bumper. After reading the suggestions in the reviews, I snipped one of the wire ties holding the two cable sets together to make sure I had enough cable length to stretch over to the passenger side. Make sure you have a couple of coat hangers or heavy wire to fish the wires through your bumper pipe. Even though person in the video was able to install the ground screw without drilling a pilot hole, I was not able to, so I needed to drill a pilot hole to get it started.
Todd S.
3/15/2015
The harness works great. I upgraded it to a round 7-wire harness with electric brakes. No need to discard this kit, it simply powers the lights while a new wire powers the brakes on the new 7-wire connector.
by: Kevin 10/04/2023
Easy to install and works great on my j eep
by: Kyle01/14/2013
2012 Jeep Grand Cherokee
The product is very easy to install. For those with comments about the wires being too short to get to the passenger side, all you have to do is cut a zip tie on the harness and there is more than enough wire supplied. Installation took about 30 minutes and the video on the website is excellent. The shipping and notification procedures with e-trailer are great. It's a pleasure doing business with them.
Kyle
7/15/2014
Product is holding up very well. No issues whatsoever. Excellent all the way around. Would recommend without hesitation.
by: Larry06/13/2011
2011 Jeep Grand Cherokee
The product quality is excellent, BUT the 2011 model year JEEP GC has changed. The wiring harness is to short! I had to add additonal wiring by cutting and splicing additional length.
This product needs to be upgraded to fit 2011 Jeep Grand Cherokee.
Patrick B.
11/21/2012
To get enough length, all you need to do is cut the zip-tie that holds the two halves together. Peel the bonded wire apart till you get enough length, then you can tie them back with a new zip-tie.
by: Richard Snipes09/15/2017
2011 Jeep Grand Cherokee
Found your website and thought it was awesome. Boy was i wrong. I ordered a wiring harness for my 2011 Jeep Grand Cherokee. Watched the video and it seems very simple and well thought out. Paid 25 dollars extra for overnight shipping so i could leave town for the weekend. Evidently Tekonsha ( supplier) doesnt know how to measure because the harness is too short. Customer service is a joke. She says someone may call me tomorrow. What good does that do. Im stuck and cant do the work i promised. Thanks etrailer. You suck.
Laura E.
9/19/2017
Richard, if you snip one of the zip ties where the yellow and green wires meet, you can make the wiring just about as long as you need.
by: Mike05/30/2016
2007 Jeep Grand-Cherokee
This was really easy to install, especially if you watch the video before installing. I chose to follow wiring that was already going across above the spare tire and tie wrapped to it. It tucks neatly away and I had plenty of wire. I do recommend cutting one of the existing ties to allow more cable.
Mike
1/23/2018
Product has been great no issues to date!
by: Frannie Freitas05/30/2016
2011 Jeep Grand Cherokee
It works grate very easy to hook up grate instructions I would recommend this product to anyone who needed a trailer hook up wire set. Order arrived ontime.very ?? happy with this product
David F.
5/30/2017
Grate no problems
25
363
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Best Way to Add a 4-Flat and 7-Way Connector to a 2007 Jeep Grand Cherokee w/ out Tow PackageI have a couple of wiring harnesses that will add a 7-way and a 4-flat to your 2007 Jeep Grand Cherokee. However, since you do not have the towing package the 7-way harness is going to need to be wired in. The first wiring harness you will need is the Tekonsha T-One Vehicle Wiring Harness item # 118425. This custom-fit T-One connector plugs into your Jeep's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. This will provide you with a 4-flat connector....
view full answer... - 4-Pin Wiring Harness for a 2010 Jeep Grand Cherokee w/ out the Tow Package. Yes, we do sell a 4-pin wiring harness for a 2010 Jeep Grand Cherokee without the factory trailer package. It is the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118425. This custom-fit T-One connector plugs into your Jeep's wiring harness, which is located behind the tail lights. Some other parts you may need for towing are a trailer hitch item # e93AR is confirmed to fit your Jeep. I also recommend the Curt Towing Starter Kit for 2" Hitches item # C45534.
view full answer... - Brake Controller for 2008 Jeep Grand CherokeeWhile we have not had a chance to install a brake controller on a 2008 Jeep Grand Cherokee we have installed them on other Jeeps of the same year, and the process will be similar. Assuming you do not have the factory tow package or factory 7-way on your Grand Cherokee you need to start with a 4-way connector, the T-One Vehicle Wiring Harness # 118425, and this is something we do have an installation video for on an '08 Grand Cherokee. You will also need the Universal Installation Kit...
view full answer...
- Is there a Quick Connector Trailer Wiring Harness Available for a 2011 Jeep Grand CherokeeThe T-One wiring kit, item # 118425, is a quick T-connector kit that installs inline with the vehicle taillight wiring and does not require splicing into the vehicle factory wiring. This connector will provide a 4-Way trailer connector at the rear of your 2011 Jeep Grand Cherokee. The hardest part about installing this wiring harness is accessing the wiring at the rear of the vehicle taillights. We have a video of the # 118425 Harness being installed on a 2007 model which will be very...
view full answer... - How to Make the Tow Ready Trailer Wiring Harness Long Enough to be Used on 2012 Jeep Grand CherokeeThere is a pretty simple fix for the issue people have where it seems like the harness is too short. What you will need to do is cut the zip-tie that holds the left and right harnesses together and then pull the wires apart as they are bonded together. This will give you plenty of wire to make it to both taillights of your 2012 Jeep Grand Cherokee. If you check out some of the other reviews you can see that some people had success with this method too.
view full answer... - Is There a 7 Way Connection That Uses T-Connectors for a 2011 Jeep Grand CherokeeI have a solution for you, but it sounds like you're looking for a 7 way connector that's installed using T-connectors, which does not exist. Additionally, since your 2011 Jeep Grand Cherokee does not have the towing package, you'll need to do some hard wiring to complete the installation of the parts required. In order to install a 7 way connector on your 2011 Jeep Grand Cherokee you'll need to start by adding a 4-way connector like the Tekonsha # 118425, which will tee into the tail...
view full answer... - Parts Needed to Add a Brake Controller on a 2013 Jeep Grand Cherokee With or Without the Tow PackageSince you don't have the trailer towing package on your 2013 Jeep Grand Cherokee you do need to start off by installing a 4-Way connector. I recommend the Tekonsha T-One # 118425 as we have found Tekonsha to be one of the most reliable wiring companies that we carry. To have 7-Way and 4-Way connectors on your Jeep you also need the Universal Wiring Kit # ETBC7. This connects to the T-One and give you both connections that you need. It also includes everything you need for the 7-Way to...
view full answer...
- Does Computer on 2011 Jeep Grand Cherokee have to be Reprogrammed to be Able to TowOne of my coworkers has a 2012 Jeep Grand Cherokee which is the same generation as your 2011. When we went to install a 7-Way trailer connector on it the vehicle did have to be reprogrammed by a Jeep dealer. The Jeep should have the wiring there to add a 7-Way but it would not be fully functional unless the BCM was flashed by a dealership. You will not have to do this if you were to add a 4-Way trailer connector. If you plan on doing some towing in addition to the trailer hitch, # C13065,...
view full answer... - Trailer Wiring Recommendation for a 2007 Jeep Grand Cherokee without Tow PackageFor trailer wiring for your 2007 Jeep Grand Cherokee you would want the Tow Ready Wiring Harness part # 118425 which is a confirmed fit. It does not require a taillight converter since the taillight circuits of your vehicle match what the trailer wiring standards are. Meaning the turn signals and the brake signals are carried on the same circuit. I attached an install video for this harness for you to check out as well.
view full answer... - Wiring 2007 Jeep Grand Cherokee For Brake ControllerThe 2007 Jeep Grand Cherokee does not have the pre-wired port used for installation of a brake controller. To install a brake controller on your 2007 Jeep Grand Cherokee with a factory 7-Way you will need to do some hard wiring. The wire Jeep provides is the electric brake output wire that goes back to the 7-Way trailer connector. This wire should be a light green wire that is behind the fuse box in the cab of the Jeep. It will connect to the blue wire on the brake controller. You will...
view full answer...
- Parts Needed to Install a Trailer Brake Controller on a 2012 Jeep Grand CherokeeIf your 2012 Jeep Grand Cherokee does have the factory brake controller plug and it is functional then you can use # TK93VR with brake controller # 90885. The factory plug should be located underneath the dashboard, to the left of the steering column taped to another wiring harness near the emergency brake pedal. I have linked instructions for you to view. If your Jeep did not come with the factory tow package (the 7-Way trailer connector was not included) then you would need to hardwire...
view full answer... - Trailer Hitch and Wiring Recommendation for 2010 Jeep Grand CherokeeFor your 2010 Jeep Grand Cherokee the best and easiest to install trailer hitch is the Draw Tite part # 75338. It has the easiest install like you are wanting, the best towing capacities, and also is mostly hidden. For trailer wiring the Tekonsha kit part # 118425 is a great option too that's easy to install. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
view full answer... - Trailer Hitch and Wiring Recommendations for a 2011 Jeep Grand CherokeeIf your 2011 Jeep Grand Cherokee does not have the round factory plug behind the rear bumper for a trailer connector (see photo), then the parts that you listed will work. Before you proceed, I recommend checking for the factory trailer plug behind your bumper again because we found that Jeep included this plug on some models that did not have the factory tow package. If you have this plug, then you can use our Multi-Tow Trailer Connector, # 74682, instead of the 4-way wiring harness and...
view full answer...
- Troubleshooting T-One 4-Pole Wiring Harness 118425 in 2012 Jeep Grand CherokeeThank you for your purchase of T-One 4-pole trailer wiring harness # 118425 which is a confirmed fit on your 2012 Jeep Grand Cherokee and installation of which is shown in the linked video on a 2013 model year GC. Your issue of certain left-side vehicle lights now not working after you first connected your trailer suggests that your trailer either has a short-circuit somewhere in its wiring or that its total power demand from all of its lights is more than the harness can deliver. Either...
view full answer... - Wiring Needed for 2012 Jeep Grand Cherokee to Power Trailer Brake Lights and Turn SignalsThe Draw-Tite Class III Receiver Hitch, # 75699, is a great option for your 2012 Jeep Grand Cherokee. The T-One Vehicle Wiring Harness with Trailer Connector, # 118425, is the wiring that you will need to operate brake lights and turn signals on a trailer. This connector plugs directly into the existing wiring with no cutting or splicing needed. We also offer the Ball Mount, # C45010, 2-inch Hitch Ball, # 63845, or the 1-7/8 inch Hitch Ball, # 19260, that you may need to get you ready...
view full answer... - Comparing Curt and Tow Ready Trailer Wiring for a 2013 Jeep Grand Cherokee without Tow PackageBoth the Tow Ready harness # 118425 and the Curt harness # C56009 install and function the same way on your 2013 Jeep Grand Cherokee without the factory tow package. They are just from 2 different manufacturers. I have linked videos showing example installations of both for you. I usually recommend Tow Ready over Curt because on harnesses with converter boxes the Tow Ready ones seem to be the more reliable option. But in this case there are no converter boxes so you could go either way...
view full answer... - How to Iinstall a Brake Controller on a 2011 Jeep Grand Cherokee OverlandTo install a brake controller on the 2011 Jeep Grand Cherokee you will most likely have to hard wire. From the information I was able to obtain there is a brake controller connection point, but the connector is not available aftermarket. If a connector is supplied, it will be in one of two locations. The first is under the dash just to the left of the steering column. The second is behind the driver's side kick panel next to the emergency brake pedal. If you find the connector you will...
view full answer... - Installing Trailer Brake Controller on 2008 Jeep Grand Cherokee LimitedYour 2008 Jeep Grand Cherokee will not have the dash wiring kit. If you have a factory 7-way then you will need kit # 5506 to complete your wiring and add a brake controller like the Tekonsha Prodigy P3 # 90195. If you do not have the factory 7-way, then I recommend the kit # ETBC7 to give you the wiring for your brake controller and also give you the 7-way trailer connector. If you don't already have a 4-way trailer connection, then you will first need # 118425. This is an easy installation...
view full answer... - What is the Difference Between CURT Class III Trailer Hitches for a 2011 Jeep Grand CherokeeThe main difference between CURT Trailer Hitch C13075 and # C13065, is the cross tube. On C13075, it has a round tube and the receiver extends straight out from the side of the tube. This requires a bend in the cross tube which makes more of the hitch visible beneath the vehicle. Hitch # C13065 has a square cross tube. The receiver is welded to the bottom of the square tube and this makes only the receiver visible beneath the rear of the vehicle. The rest of the hitch is hidden behind...
view full answer... - Adding a 4- and 7-Way Trailer Wiring Harness on a 2007 Jeep Grand CherokeeIf your 2007 Jeep Grand Cherokee did not come with a factory installed 7-Way trailer connector then there will be know plug and play options for a 4- and 7-Way connector but you can hardwire in one using # ETBC7. If it did come with a factory 7-Way then you can use # 20135 which is both a 4-Way and 7-Way. If you decide to hardwire in an ETBC7 and you do not already have trailer wiring, you will first need to install a 4-Way using # 118425. Then you will go ahead with the ETBC7 installation....
view full answer... - Trailer Hitch Recommendation for 2007 Jeep Grand Cherokee for Towing Small TrailerFor your 2007 Jeep Grand Cherokee the Curt hitch part # 13251 is a confirmed fit and would easily tow a small rental trailer like you mentioned. For trailer wiring you then would want the part # 118425 which is a confirmed fit. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch...
view full answer... - Recommended Wiring Harness and Trailer Hitch for 2013 Jeep Grand CherokeeWe do offer custom fit trailer wiring harnesses for your 2013 Jeep Grand Cherokee. Since you are also looking for a trailer hitch, such as the Curt Class III Receiver # C13182 that you referenced, it is likely that your Grand Cherokee does not have a factory towing package installed. In this case, I recommend the Tow Ready T-One Vehicle Wiring Harness # 118425. This wiring harness installs in line with the factory wiring behind the vehicle's taillight housings, and it will not require you...
view full answer... - Draw Tite or Hidden Hitch for a 2011 Jeep Grand CherokeeDraw Tite and Hidden Hitch are both made by the same company Cequent as both brands were acquired by them. There is no difference between the Hidden Hitch 87595 that you referenced and the Draw Tite # 75699. They both would fit your 2011 Jeep Grand Cherokee well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
view full answer... - Will Curt Trailer Hitch # C13065 Fit a 2012 Jeep Grand Cherokee with Tow HooksThe Curt trailer hitch instructions for # C13065, see link, do mention that if there are factory tow loops present they have to be removed prior to hitch installation. So this hitch will fit with or without the tow hooks present on the vehicle. I have also included a link to a video showing a typical installation. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin and clip, and a carrying bag. For trailer...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Test Fit:
Nicholas E
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Video by:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jacob
5/13/2024
So far so good. No complaints after a year.