To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your Ford F-350 Super Duty level, and adjust to load size for a consistently smooth ride.
Features:
Specs:
Note: The construction material of the fittings may vary.
Firestone Ride-Rite springs are designed to increase safety and reduce the strain on your vehicle when you are hauling heavy loads or towing a heavy trailer. The springs partner with your existing rear suspension system to help keep your vehicle level, maintain even load distribution and increase stability. Hauling heavy loads or towing a heavy trailer can make the rear of your vehicle sag and the front end rise. This puts more strain on your rear axle and reduces contact between your front tires and the road, causing problems with braking, steering control and traction. By adding air springs to your rear suspension, you can help to level your vehicle and improve braking and handling. The air springs also help to level your headlight beams and reduce wear on your tires.
Adjustable Air Pressure
The air pressure in your Ride-Rite springs can be adjusted manually, side to side, to compensate for off-center loads. A centered load improves the stability of your vehicle by reducing body roll. The air springs will also help to absorb road shock and to soften contact between your axle and frame. This prevents bottoming out, thus improving ride comfort. Route the air line tubing for the springs to your vehicle's bumper to provide easy access to the manual inflation valves.
Air Spring Construction
Firestone's double-convoluted Ride-Rite air springs are designed to give you maximum load support and enhance the performance and ride comfort of your vehicle. The rubber springs provide cushioning between your suspension components and operate at up to 100 psi. The springs have four layers of reinforced rubber to ensure durability and enhance load support. A braided wire girdle creates the double-convoluted shape of each air spring, increasing the burst pressure of the spring. The rubber springs are attached to corrosion-resistant metal end plates with a time-proven, rolled crimp seal that keeps the bags securely anchored.
Air Spring Installation
Each Ride-Rite kit includes custom-fit brackets that connect to your axle and frame. The brackets provide the mounting points for the air springs. Drilling may be required for some applications.
Average Customer Rating: 4.7 out of 5 stars (2415 Customer Reviews)
5,000-lb Capacity. Ride-Rite air springs enhance your factory suspension for safety and stability when you are hauling heavy loads. They reduce strain on your rear axle, keep your vehicle level, and adjust to load size for a consistently smooth ride.I have not had a chance to install yet. Ordered and received my airbags the same week. I will update after I get them installed
The ride improvement is great and the additional bracket PN F5722 was not needed for my 2016 F 250 CCSB diesel because the module in question is behind where the airbag mounts on the frame, see attached pics. I did exhaustive research on whether or not the bracket was needed and could not find a definitive answer. When the box arrived one of the saddle brackets was protruding through the side of the box and the box looked like it had been opened and re-taped. I opened the box and found that the hardware bag was opened so I took inventory of everything and it all appeared to be there going by the list in the installation manual. I have the factory puck system so I did have to notch a small section of the hitch frame to allow for the passenger side upper mount bolt to pass through. When it came time to secure the bags to the upper mounts, the supplied nuts were the wrong thread pitch, I ended up having to source two nuts locally to continue with the installation. Overall the installation was not bad, I removed the spare tire and backed up on a pair of ramps. I have not pulled my 5th wheel since I installed the airbags, I will update the review once I do.
Works great when pulling my 5th wheel RV. Truck now runs level and rides smooth
Dale
1/7/2024
Still working great!
I needed something for my Travel Trailer (12k lbs), I have a Ford F250 and needed to level the truck with the Trailer hooked up, just about 2/3 inches.
These Air Springs have worked very well over the past year, we took the trailer for about 4000 miles (Louisiana to Grand Canyon) in April/May 2023, the Air Springs worked perfectly...
I’m a full time RV traveler pulling a 5th wheel trailer. While on the road I noticed that my rear leaf springs were running flat and up against the stop block. I researched air bags and decided to go with Firestone Ride Rite. I ordered them, had them delivered to the RV park we were at and installed them myself. Is was fairly easy to install and took me approximately 5 hours start to finish. They work exactly as promised. The only problem I had was one of the air lines I installed had a small leak. Upon further investigation I found what appeared to be a manufacturer defect in the tubing. I had extra line so it was no big deal. I would recommend them.
This system I installed on my 2012 Ford F-450 dually pickup. I love it!! I replaced a air bag system that I had put on by so called professionals. It was terrible. It mounted under the spring shackles. It helped when puling a heavy loaded trailer but rode terrible otherwise. The system I bought from e-trailer uses air bags under the rear axles. It handles heavy loads when air up to 90 psi and rides smooth when empty at 25 psi. I recommend it highly.
Robert
1/6/2020
Great. Love it more.
I just received my Firestone Ride-Rite air bags along with the Air-Rite compressor system. William helped me to order the correct parts for my application. I’m excited to get started!
Thanks to the excellent installation video provided by etrailer, along with the reviews provided by other, the installation on my 2016 F-350 SRW went well. I have a B&W turnover ball hitch, and had to temporarily remove the driver side plate (thanks to a review from another installer, I knew to expect that) before I could proceed with the installation.
One suggestion on the video installation I would recommend: they removed (cut off) the hard wire parking brake holder on the driver side and relied solely on zip ties to relocate the parking brake cable. I shortened that bracket by removing the bracket from the truck with pliers and a large screw driver, by sawing off a portion, placing it in a vice, and making a new opening by bending it around a 3/8” bolt. Much better solution.
Awesome product, really helps to stabilize the ride while pulling my 5th wheel. Highly recommend it.
Michael
5/6/2023
Still working well great, product.
The installation video is very helpful however, when the tech in the video said there may be some modifications needed he was not kidding.
The level of work is quite a bit and do it yourself people should know it can get a little complicated especially if you do not have a lift.
Thank you for a nice product. Works very well.
Great product worked perfect on my 2014 4X4 F-250, I was a little worried because my truck is reverse leveled so it sits 2” lower in the rear but this setup had enough adjustability to work even being lowered.
Strainer is the best! Products in stock. Great videos and website. Customer service very responsive and helpful! Will use them for everything I can! Thank u.
Mark
12/31/2022
I’ve been using them for over a year now and they still work great. Keeps truck level and riding smooth with our 25k pound fifth wheel.
Driver side a little tough to install compared to passenger side. Of course everything is a little tough when you're 66 years old. Excited to try them out with a load. Will let you know how they work. Thanks for the quick turnaround.
Lower mounts a little tricky to reach bolts on my application, but overall very simple/fast install. Love them
Very pleased with the air bags!
Relatively easy to install. Provides leveling for an undersized weight distribution setup and performs flawlessly. I have been very pleased with this setup.
Big J.
11/15/2021
The Firestone air suspension is excellent. I used it to tweak the height with my toy hauler and now to level my truck with my fifth wheel. I may install an automatic system, but am very pleased with my current setup.
These air bags have kept my truck level when I am pulling my large 5th wheel. Not to mention it has improved the ride while pulling. The installation was done by me and was not that bad at all. My only regret is not purchasing the compressor system (for convenience) but that is going to be ordered soon. This was a great purchase.
The one to two hour installation time is laughable if you have a B&W turnover hitch. I had to take the driver's side B&W plate off to mount the driver's side air bag. To get the the driver's side B&W plate, I had to drop the DEF tank. None of this was mentioned in the instructions. Passenger side was much easier. It took a total of 8 hours to install in my driveway on a creeper with my wife's help. Our marriage survived. This was was very difficult, and I would recommend doing it on a lift.
Also, there is a slow leak that I can't find.
Just installed the Ride Rite Helper Springs so I don't have any hauling use yet, just wanted new installers to know if you have a B& W companion 5th wheel hitch you will have to remove bolts from the driver side plate to pivot it up to remove the Def tank mount, other than that it was a fairly easy install taking about 3 hours with the Ford F350 up on jack stands with the rear tires off. I will try to update my review after towing our 42 foot 5th wheel RV to the west coast and back in June and July
Installed on 2014 F-250 Diesel with short bed. I have the B&W Turnover Ball and these products work well together. Installation required removing the B&W frame plate on the drivers side to access the DEF screw and I had to remove the large bolt on the passenger side frame plate to use the existing hole for the airbag mount, but not too big of a deal to retrofit.
PS. My truck did not have the exhaust sensor on the passenger side that some people have mentioned.
High quality air bag!!. The install was straight forward after I found some good YouTube videos to assist. I have the B&W Turnover Ball gooseneck hitch installed and removed the driver side side plate on the hitch to make the install easier.
Fair price, fast shipping, great customer service. Been a long time customer.
Delivery was very quick. Everything I ordered came in great shape and complete.
I installed these air bags on a 2015 F250 for hauling our 5th wheel.
It took me around 5hrs more or less to install by myself. I have never done this before and kept checking everything twice. That and I used all hand operated tools. The instructions were good. But watching the installation video 1st was helpful.
They are very easy to install. The hardest part of installation was dealing with the bump stops. I have a B&W goose neck hitch and had to take part of the drivers side bracket apart to mount the bag but it was simple.
Ordered these for a 2015 F-250, 4WD, Diesel
To start off, great price and delivery, kit was on my door 2 days after ordering.
Kit appears to be made of quality components and was complete.
Instructions were fairly clear with good pictures, but skipped steps that were repeated from left side to right and had some information backwards (e.g. parking brake information AND holes for securing brake cable were on wrong side). For the diesel units, there's a sensor control module that occupies the frame-rail area that the RH side upper mount attaches, which caused about an hour and a half of fiddling/drilling/re-routing harnesses to sort out. Again, this wasn't accounted for in any instructions or any videos, but is easy enough to accomplish (simply moved the module forward in the frame rail, required drilling new mount holes).
Bracket assembly is somewhat wonky/difficult due to the braketry's attempt at being "universal", but once assembled is solid.
Gas plumbing is also simple and more than enough hose is supplied (I had about 1.5x the amount I needed, so I've got enough left over for a spare should I tear/blow a hose out on the road).
Overall I'm satisfied with the finished product, but the installation process/universal fitment design can be frustrating to install. If I had paid a shop to do this, looking at the finished product, closer to a 4.5 star product, but the frustrations of personally dealing with this installation procedure drop that to a near average product review.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ronald
5/14/2024
It has performed great. No issues at all to adjust the air pressure dependent on the load.