Recommended Replacement for Optronics MCL61ARB

Question

Question:

i need a replacement light. i have a OPT MCL61ARB 112817 is there a replacement number for this. the closest i see is MCL65ARB 090417. Is this the right one?

asked by: Jim B

0

Expert Reply:

I have some good news, we carry the Optronics Thinline LED Trailer Fender Light - Submersible - 2 Diodes - Red/Amber Lens # MCL61ARB. This should be the exact same light you have so it is the perfect replacement.

expert reply by: Robin H

0

Answer 1

For the black molded fender bracket that works with the Optronics Thinline LED Trailer Light #MCL65ARB you will need the part #A67BB, which is indeed sold separately. This bracket includes the lead wire for power. If you are just needing the…

view full answer...

Answer 2

The Optronics LED clearance light that is similar to #MC65RB, but will be amber and red, is the Optronics LED clearance light #MCL65ARB. This light is sealed, waterproof and is a surface mount. The dimensions are 3-15/16 inch length by 1-1/4 inch…

view full answer...

Answer 3

For your trailer wiring, I recommend the Submersible LED Trailer Light Kit w 25' Wiring Harness #TL16RK along with the Identification Light Kit for Trailers over 80" Wide - Submersible - 3 LEDs - Red #MCL22RK3B. I recommend the…

view full answer...

Answer 4

You could technically use a junction box like part #3375601101 for a 4-Way connection, like part #HM38134, but since junction boxes are designed for 7-Way connections you'll need to find a way to plug up the larger hole since you're only…

view full answer...

Answer 5

There are five mounting brackets available that fit the Optronics Trailer Clearance Side Marker Light #MC65AB. These three are all black plastic. They are Optronics #A65PBPG, #A65PB and #A65B. The first two come with a single wire, the…

view full answer...

Answer 6

What you have a is a 4-way Wishbone trailer connector like part #A35W42B. The two brown wires are both the running light circuits. One needs to ran to each side of the trailer. This makes the wiring a little easier instead of having to run the brown…

view full answer...

Answer 7

We have an aluminum 7 spoke 14 inch trailer wheel that looks pretty close to the wheel in the picture you sent us, but it's not an exact match. For that wheel you would want the part #AM22329. For a 205/75R14 you can use #AM10234 or tire #AM10229…

view full answer...

Answer 8

We do offer all sorts of trailer lighting, including fender-mount types such as #BA44FNL and #BA44FNR which are combination red/amber lights. We also have #MCL61ARB. These and all other red/amber lights are shown on the linked page. If you cannot…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...