Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Flat plate measures 2-3/4" x 2-3/8" (from center of hole to center of hole) with 9/16" wide x 13/16" long bolt holes. Durable galvanized steel plate attaches axle to leaf spring using 1/2" diameter U-bolts (sold separately).
Features:
Specs:
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the CE Smith U-bolt plate for trailer suspension systems. The U-bolt plate's going to help secure a 2" diameter axle to a 1 3/4" wide leaf spring. You can tell that it's designed for a 1 3/4" wide leaf springs by taking a measurement of the space between these two holes. It's going to be the same as the space between these two holes. That's going to give us the measurement of 1 3/4". The unit does require two 1/2" diameter U-bolts, U-bolts are sold separately.
If you're in need of those you can find them here at etrailer.com. The four outer holes are designed to accept 1/2" diameter bolts. The unit's made from a galvanized steel construction. It's very strong and durable, as well as corrosion resistant, so it's going to be great for boat trailers or any application that's exposed to moisture. The product is made in the USA. The diameter of the center hole's going to measure around 5/8".
The over all length from edge to edge, that's going to give us a measurement of about 5" and then these two holes are going to be separated on center by 2 3/4". The over all width measurement is going to give us of 3 3/4" and then these holes are going to be separated on center apart from one another by 2 3/8". That's going to do it for today's look at the CE Smith U-bolt plate for trailer suspension systems.
Average Customer Rating: 4.8 out of 5 stars (33 Customer Reviews)
Flat plate measures 2-3/4" x 2-3/8" (from center of hole to center of hole) with 9/16" wide x 13/16" long bolt holes. Durable galvanized steel plate attaches axle to leaf spring using 1/2" diameter U-bolts (sold separately).Quick delivery and exactly what i ordered. Thank you.
always find what i need here
I bought springs, shackle bolts, and u-bolts and plates. Everything was great and fit perfectly. Only issue were the u bolts which were not galvanized. However, at a local trailer store, I bought galvanized U bolts for $4.50 each.
For the DYIers, taking the old ones off took more than 4 hours for each side. My existing shackle bolts were so heavily rusted that I had to cut three off with a hack saw. Difficulty was confined space to operate hack saw with boat still on trailer. However, reassembling the new springs was less than 45 minutes each side.
Must have tools are large diameter 3/4-13/16-7/8 deep sockets (6 point), 2 2 foot long breaker bars and a can of PB blaster.
For safety: Good quality jack stands, minimum of 3--don't rely on the front trailer jack as it may roll.
By the way, I did these myself and I am 64 years old.
I got 4, I needed 8 U-bolts to go with these but again they only had 4 so they sold me the 4 and when I asked about the others, they told me that I could not get them until July. Why are they selling items that they don't have?
Good Galvanized U- bolt plates. Used for my boat trailer. Worked with out any problems. I have use etrailer for several years now. Will continue to use them. Good service.
ordered leaf springs, ubolts, plates and fenders for my Magic tilt trailer. Everything arrived in one box very well packed, in a timely manner. The parts fit like the originals.
Will book mark your web site for the next project!!!!
perfect, thanks
Completely restored our 1987 8x 10 trailer, turned out great. I found all the required parts from etrailer. Shipping was fast. etrailer was excellent to deal with. Thanks etrailer, best regards
Very happy with the quality & price for the axel mounting hardware. Will definitely recommend & do business with again, extremely pleased with my order.
Perfect fit fast felivery
My order arrived in the time frame projected. I was kept well informed of the shipment status. The items are very good quality and well packaged. I will order from etrailer again.
Fast shipped . Fair price. I would highly recommend them
Good product. Works good for me. Quick shipping.
Fast delivery great service. Holes were slotted so made installation a breeze.
Always tell me good parts at a very affordable price
Great place with which to deal.
Prompt shipping.
Helpful, knowledgeable, and courteous folk.
Everything I needed to fix my has out preformed my expectations. Thank you
They are metal plates. They fit. What else can I say?
Good product. Fast shipping. Good price.
excellent product
good product
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gregory
7/14/2022
Still working good. I would buy again.