MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
(11 reviews)
Price: $374.99
In Stock
MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
Item # MR29DR
Our Price: $374.99
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Videos (4)
- Photos
MORryde Trailer Leaf Spring Suspension - MR29DR
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- MORryde
Upgrade your trailer's suspension system with the AllTrek 4000 equalizers for a smoother, more comfortable ride. The rubber insert offers up to 4" of suspension travel for greater shock absorption.
Features:
- AllTrek 4000 equalizers replace your stock equalizers for a smoother ride
- Rubber insert dampens road shock
- Provides up to 4" of suspension travel
- Reduces back-and-forth chucking
- Requires less maintenance than equalizers with air bags
- Mounting hardware sold separately
- Made in the USA
Specs:
- Application: tandem-axle trailer with 35" wheelbase and double-eye leaf springs
- Quantity: 2 equalizers
- 3-Year warranty
TG2-35 MOR Ryde AllTrek 4000 Trailer Suspension Equalizers - Tandem 35" Wheelbase
Replaces SRE2-735X
Video of MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for MORryde Tandem Axle Trailers AllTrek 4000 Equalizers Review
Hello neighbors, it's Brad here at etrailer and today we're taking a look at the MORryde AllTrek 4000 Suspension Equalizer. Now our previous equalizer here you can see that it does have rubber and that's gonna allow this to kind of move up and down and have that cushion. These are pretty loose here, which is fine. It does have that movement and each of them are about I'd say an inch and a half. So you have some movement up and down and that's where putting it side by side you can see the AllTrek is not only it seems like it's a little bit taller but that's because you have four inches of movement here because you have this rubber that's supporting that weight, and as this moves up and down it's gonna be nice and even it's not gonna be sloppy and you're gonna get more of that suspension travel which allows your suspension to move a little bit more giving you a better ride overall. And that's gonna not only make for a smoother ride and kind of just be easier on your camper and it's contents but also that's gonna transmit all of that energy up to the pin box.
So it's really gonna cut down on that porpoising because the suspension can kind of settle out and take those bumps away from your connection point. Now this is bolt on installation. In fact, you can reuse your old wet bolts. What I've found, you might wanna pick up a new wet bolt kit while you're here. That way you have, you know, all new components a new hardware in place.
Now it's not required to have a crossmember kit as well. We are gonna be putting one on here. So yours may not look like this but it is not required to get this installed. Not only are you gonna get more suspension travel allowing the suspension to work better but you also have 40% more rubber absorbing those shocks. It's also gonna be progressive so as it kind of presses up, it's gonna fight against that and really settle out the suspension.
So having a little bit more cushion and more travel just means that suspension can really do what it needs to do. Now this does come as a quantity of two so it's gonna allow you to get your tandem axle set up with the one kit. But if you do have a triple axle you are gonna wanna pick up another kit. That way you can get all of your equalizers done. Installation is pretty straightforward.
You are just kind of bolting it in and you will have to get your old wet bolts out which kind of can be a struggle. And you will have to obviously take your wheels off and be able to support the axles. Might wanna have a floor jack ready too just to kind of move it as you need to to get some of your hardware in place. But overall, it's not too bad to do. Now here's what they're gonna look like installed and this is gonna be a great pretty easy upgrade to install. It's gonna give you a lot better suspension because of the ability to have a little bit more travel. And that just means a better towing experience overall. And that was a look at the MORryde AllTrek 4000 Suspension Equalizer.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase - MR29DR
Average Customer Rating: 4.9 out of 5 stars (11 Customer Reviews)
Upgrade your trailer's suspension system with the AllTrek 4000 equalizers for a smoother, more comfortable ride. The rubber insert offers up to 4" of suspension travel for greater shock absorption.by: Doug 04/08/2024
Paul was super helpful in getting my order filled properly and delivered in a timely manor. I am excited to install the product on our 5th Wheel to get a smoother ride with more security on the springs. The increased travel and sturdiness of this product is something I know will make our trips more enjoyable and give us that extra peace of mind.
by: Charles 08/06/2023
Etrailer had a back order on these once in stock they shipped them all most 2 weeks sooner than first thought they could. Great service and every knowledge on there products. I have not installed them yet as forest river and my cannot seam to repair my unit correctly which going on the forth month now which has nothing to do with etrailer or morose
by: Eric 03/18/2024
Excellent product and fast delivery!
by: Stanley12/18/2023
Was totally surprised how fast and efficient my order was received ordered on Saturday was delivered Monday morning
by: William 11/05/2023
by: Susan 03/26/2024
by: Mark 09/12/2023
by: Austin 02/23/2024
by: Zach03/02/2024
Seem to be good quality. Only have about 2” ground clearance now.
by: Rick 02/07/2024
Looks nice I’ll know more after I get them installed next week.
by: Larry 02/23/2024
11
11
See what our Experts say about this MORryde Trailer Leaf Spring Suspension
- Comparing MORryde AllTrek and SRE4000 Premium Rubber Suspension EqualizersThe MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers # MR29DR are the new upgrade to their counterpart - the MORryde Premium Rubber Suspension Kit for Tandem Axle Trailers MR47ZR. According to MORryde, the AllTrek has been through more intense testing than any of their other equalizer systems and since it doesn't have to have the crossmember that's just an added bonus. Unless you like the idea of having that extra crossmember, I recommend going with the AllTrek.
view full answer... - Can Equa-Flex Be Replaced With MORryde AllTrek 4000 Equalizers # MR29DR? Yes, you can replace your current Lippert Equa-Flex equalizers with the MORryde AllTrek 4000 Equalizers # MR29DR on your 2018 Highland Open Range. The yellow octagons on the front and rear are a for correcting the alignment of the axles and are not specific to the Equa-Flex equalizer.
view full answer... - Does MORryde AllTrek 4000 Have Minimum Weight RequirementAccording to MORryde the AllTrek 4000 # MR29DR does not have a minimum weight requirement. However, smaller axles typically aren't compatible since there are other requirements like wheel size. The equalizers require a minimum rim size of 15" for an overslung axle and 16" for an underslung axle.
view full answer... - Are ALLTREK 4000 Cushioned Trailer Suspension Equalizers the Best AvailableThe AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part # MR29DR or if you have a 33 inch wheelbase you'd need the part # MR89DR. These kits have vertical and horizontal cushioning unlike all other options so they are going to make a huge improvement.
view full answer... - Do Leaf Springs Need to be Changed Going to AllTrek 4000 EqualizersHi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase: MORryde AllTrek 4000 Shock Absorbing Equalizers # MR89DR - 35" Wheelbase: MORryde AllTrek 4000 Shock Absorbing Equalizers # MR29DR
view full answer... - Upgrading Suspension Equalizers On 2018 Prime Time Trace Air 275 Travel TrailerHey Scott, I can certainly point you in the right direction for picking out an equalizer upgrade kit for your 2018 Prime Time Tracer Air 275 travel trailer. You will need to measure your wheel base (aka axle spacing) to determine if you need MORryde ALLTREK 4000 Shock Absorbing Equalizers for Tandem Axle Trailers - 33" Wheelbase - 8K # MR89DR or the 35" Wheelbase version # MR29DR. This measurement is the center of the front axle to the center of the rear axle. For the wet bolt kit, I...
view full answer... - Cushioned Equalizer Recommendation for Toy HaulerThe MORryde Alltrek 4000 kits offer the best cushioning so if you are wanting to improve the ride quality of your 2011 Stellar Eclipse that would be the route I would go with. If the wheelbase is 35 inches between the axles you would want the part # MR29DR or if 33 inch part # MR89DR. These provide horizontal and vertical cushioning unlike the other available options. For a shackle kit then you'd want the part # MR58ZR and you'd be set.
view full answer... - Do the MORryde AllTrek 4000 Equalizers Require an MORryde X-Factor CrossmemberAccording to the MORryde site, the MORryde AllTrek 4000 Equalizers # MR29DR does not require the use of a MORryde X-Factor Crossmember # MR33WR. But, they do state that the MORryde X-Factor Crossmember # MR33WR can be added for additional durability and an even smoother towing experience.
view full answer... - Is MORryde Rubber Suspension Kit SRE4000 For 35 Axle Spacing a Good OptionAll of the feedback we have had for the MORryde SRE4000 kit has been positive; I have not had anybody come back to me with any type of issue, and I also went and looked through our reviews on this and even similar kits and equalizers and haven't found any issues. Since you mentioned 7k axles with 35" spacing the SRE4000 kit you are referring to is the following part number: - MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase # MR29DR And while you can use your existing...
view full answer... - Cushioned Equalizer that Could Fit 2019 Coachmen Apex 300BHSThere is a really good chance the Lippert Road Armor cushioned equalizer part # LC696740 will fit your 2019 Coachmen Apex 300BHS but you will want to measure your current equalizers to be sure. If your current equalizers has 6 inches between the outside holes (or pretty close to that) this will fit and work great. This was designed to be as universal as possible so there's a really good chance this is correct fit. It will also not raise height either. If the distance you measured is more...
view full answer... - Will the MORryde ALLTREK 4000 Equalizers Provide a Smoother Ride for a Boat TrailerHey Ken, thanks for reaching out! The MORryde ALLTREK 4000 Shock Absorbing Equalizers, 33" Wheelbase # MR89DR or 35" Wheelbase # MR29DR, are a good upgrade to a standard leaf spring suspension and will help to provide a better ride quality for your trailer and boat. There are definitely better suspension upgrades like the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570, but this is a really big suspension upgrade so it is priced accordingly. I will...
view full answer... - What Is The Correct MORryde X-Factor Crossmember For An AllTrek 4000 EqualizerSince the MORryde AllTrek 4000 Equalizers # MR29DR sits inside the middle hanger like a standard equalizer you'd want to use the MORryde X-Factor Crossmember for Standard Frame Hangers # MR33WR. This crossmember will use your wet bolt and come with two other bolts and a shackle strap in clamp onto the hanger. I've attached a short installation video below where I'll walk you through the installation process of the # MR33WR.
view full answer... - MORryde AllTrek 4000 Equalizers and Wet Bolt Suspension Kit for a 2013 Redwood RV Redwood 5th WheelThanks for reaching out, Bret! If your axles shifted from being located above the equalizers to below your equalizers then it sounds like replacing your bushings, equalizers, and shackle straps will fix the issue. As long as your leaf springs are in good shape you shouldn't need to swap them out either. The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase # MR29DR will fit your trailer spacing, and then I recommend using the MORryde Upgrade Trailer Kit to replace...
view full answer... - Upgraded Equalizer Suspension Solution for 2022 Forest River Salem Hemisphere 356QBFor your 2022 Forest River Salem Hemisphere I would recommend going with the MORryde AllTrek 4000 cushioned equalizers like the part # MR29DR for if you have a 35 inch wheelbase or the part # MR89DR for if you have a 33 inch wheelbase. The reason I like these is that they have vertical and horizontal cushioning unlike other options that have one or the other. Then for the hardware upgrade it comes down to the length of the shackles you have now as well. If they are 3-1/8 inch you would...
view full answer... - Recommended Cushioned Equalizer & Wet Bolt Shackle Kit For 2020 Coachmen Chaparral 336TSIK 5TH WheelI recommend going with the MORryde AllTrek 4000 Equalizers # MR29DR over the Lippert Road Armor # LC696740 on your 2020 Coachmen Chaparral 33TSIK. With the Road Armor bolts only spread 6" on center and your current leaf spring sitting relatively flat I worry going to the shorter equalizer may cause the shackle to flip on the equalizer more easily. You will want to use the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" # MR86ZR with the new equalizer. This will give you...
view full answer...
- Is MORryde Rubber Suspension MR29DR Upgrade Over E-Z Flex Equalizers For 5th Wheel TrailerThe E-Z Flex equalizers like the # K71-653-00 are a nice system, but for your Coachmen Chaparral 391QSMB 5th wheel trailer, the MORryde suspension system you mentioned will absolutely be an upgrade: - MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase # MR29DR The MORryde kit is an improvement over the E-Z Flex due to the amount of travel. There is very little, if any, axle travel improvement with the E-Z Flex, so while its rubber core helps with road shock, it doesn't...
view full answer... - How To Select The Correct MORryde AllTrek Equalizer For a Tandem Axle Trailer The best way to find the correct replacement for your equalizer is by measuring the distance from the front shackle hole to rear shackle hole on your current equalizer. The 33" AllTrek # MR89DR has the holes spaced 6-1/2" on center while the 35" AllTrek # MR29DR spaces the holes 8" on center. While the MORryde qualifier is very helpful I find that measuring is best since different trailer manufacturers do not always follow the same practices for welding on the spring hangers and setting...
view full answer... - Is It Okay To Mix & Match Lippert Cushioned Equalizers With MORryde Shackles On Tandem Axle Trailer?It is okay to mix and match the Lippert Road Armor # LC696740 with the MORryde 2-1/4" # MR46ZR or 3-1/8" # MR76ZR shackle straps. The MORryde shackles are superior in construction to the Lippert kits we currently carry. MORryde did just release their MORryde AllTrek 4000 Equalizers # MR29DR. These provide up to 4" of suspension travel in the equalizer alone which is much greater than than Lippert offerings. We have installed this on a few trailers so far in our shop and have been very happy...
view full answer... - MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers With 35" Wheelbase We do carry the MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers # MR29DR. This is going to be their 35" wheelbase version which is going to be 8" from center of front shackle mounting hole to the center of the rear shackle mounting hole. I recommend pairing this with one of their shackle kits. MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps # MR46ZR MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps # MR76ZR MORryde...
view full answer... - Recommended Replacement Equalizers and Wet Bolt Kit For a 2014 Heartland Landmark Savannah 5TH WheelWith the recent addition of the MORryde AllTrek 4000 Equalizers # MR29DR I feel these are now the best option. These equalizers provide up to 4" of travel with axles up to 8,000lbs. Be sure to pair this with one of the shackle kits listed below. You will need to identify if you have Correct Track suspension(adjustable axle hangers) and what the length of your straps are from center to center on bolt holes. MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps...
view full answer... - Recommended Shocks and Equalizer Upgrade For a 2017 Grand Design Imagine 2600RB Travel TrailerI recommend using the Roadmaster Comfort Ride Shock Absorbers # RM-2450 and the MORryde AllTrek 4000 Equalizers # MR29DR on your 2017 Grand Design Imagine 2600RB travel trailer. These will fit your 3,500lb axles and replace your stock equalizer. You will also want to upgrade your shackles to the MORryde Suspension Upgrade Kit # MR76ZR. I recommend using the Grease # L11390 and a Grease Gun # L30416 for the wet bolts. This grease is more resistant to water than other types of grease and...
view full answer... - MORryde Suspension Kit, Shackle Straps & SumoSprings For 6k Axles w/ 35 WheelbaseI certainly don't blame you for wanting to get it right the first time, and the answer to each of your questions is yes, it will all work together, though there are a couple of things you'll want to be certain to verify. But first, for the equalizer upgrade and crossbeam, for your 35" wheelbase (which you measured correctly from center to center of your wheels) you do have the correct part for your 6k axles: - MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers # MR29DR With that,...
view full answer... - Replacement Hangers, Equalizer, U-Bolts, Springs For a 2015 Keystone Carbon 327 5TH Wheel Toy HaulerThank you the pictures are a great help. I recommend using the MORryde AllTrek 4000 Equalizers # MR29DR with the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" # MR26ZR for your 2015 Keystone Carbon 327 5th wheel camper. These straps are much thicker than the thin straps you got from the factory so they will not elongate like your current straps which now measure 1/8" longer. We have the 3-1/4" Hanger # 28-5 which will work as a replacement for your front, center or rear...
view full answer...
- Suspension Upgrades For a 2019 Grand Design Solitude 380FL 5TH Wheel Camper With 7,000LB AxlesI have a couple options for you to replace the suspension on your 2019 Grand Design Solitude 380FL 5th wheel camper. First the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers # RM-2460-2570 which I see you already found is one option. The benefit of this is you get a more independent suspension on the axles so as one axle goes up over a bump it does not affect the wheel and tire behind it. Best of all everything including shocks comes in one kit. If you would rather...
view full answer...
Do you have a question about this Trailer Leaf Spring Suspension?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Video Edited:
Dustin K
Video Edited:
John S
Updated by:
Wilson B
Test Fit:
Bradley B
Written by:
Ryan F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.