Replacement Hangers, Equalizer, U-Bolts, Springs For a 2015 Keystone Carbon 327 5TH Wheel Toy Hauler

Question:

I submitted a question on my 2015 Keystone carbon 327 I need some more information. my trailer is a tandem axle so i need part #s for the upgrade shackle kit my shackles measure 3 1/4 inch to the eye. I also need hanger brackets which measure 3 1/8" to the bolt hole. also my springs measure 26" weighted. as for the crossmember i have a drain pipe that hangs down about 3" to the bottom of the pipe but about 1 1/4 inches above the hanger. also do you have u bolts for a 3" tube axle. Thanks for your help

asked by: Randy G

Expert Reply:

Thank you the pictures are a great help. I recommend using the MORryde AllTrek 4000 Equalizers # MR29DR with the MORryde Suspension Upgrade Kit for Triple Axle Trailers - 3-1/8" # MR26ZR for your 2015 Keystone Carbon 327 5th wheel camper. These straps are much thicker than the thin straps you got from the factory so they will not elongate like your current straps which now measure 1/8" longer. We have the 3-1/4" Hanger # 28-5 which will work as a replacement for your front, center or rear hangers. It measures 3-1/4" from the top of the hanger to the center of the mounting hole. You will want to add the MORryde X-Factor Dropdown Crossmember # MR84AR to all your hangers to give them more added strength and clear your sewer line. Do not worry about them hanging down as your axles will sit much lower.

I recommend using 2 of the CE Smith U-Bolt Kits # CE23003 as these offer galvanized plates and zinc coated bolts and nuts for better corrosion resistance. Our 6-Leaf Double-Eye Spring # e64SR is our only 7,000lb leaf spring we currently carry. This spring is 24-7/8" long with no weight on the axles. If you were to flatten the spring the measurement would be 26-3/8" so if you springs are nearly flat these may be the correct replacement.