What Bushing Is Used With The Slipper Spring DX73QR And Hanger Kit HAP-105-00
Question:
Good morning, What bushing is used with axle DX73QR and hangers HAP-105-00. Thank you
asked by: Lawrence B
0
Expert Reply:
The bushing that goes with the slipper spring # DX73QR is part # DX77XR. The bushing has a 5/8" diameter so it will work perfectly with the hanger kit # HAP-105-00.
expert reply by:
Jesse M
0
Products Referenced in This Question
Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 8000 lbs
- 2 Inch Wide
- 7 Leaf
- 26-5/8 Inch Long
- Painted
- Dexter
more information >
Rubber Bushing with Steel Sleeve - 5/8" ID, 1-3/8" OD - 2-3/16" Long
- Trailer Suspension Parts
- Bushings
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 5/8 Inch ID x 1-3/8 Inch OD
- 2-3/16 Inch Long
- Dexter
more information >
Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- Dexter
more information >
Product Page this Question was Asked From
Dexter 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 8000 lbs
- 2 Inch Wide
- 7 Leaf
- 26-5/8 Inch Long
- Painted
- Dexter
more information >
Continue Researching
- Shop: Rubber Bushing with Steel Sleeve - 5/8" ID, 1-3/8" OD - 2-3/16" Long
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Spring Mounting Hardware - DX77XR
- Shop: Dexter 6-Leaf Slipper Spring w/ Flat End for 12,000-lb Trailer Axles - 30-1/2" Long
- Shop: Dexter 7-Leaf Slipper Spring w/ Flat End for 15,000-lb Trailer Axles - 30-1/2" Long
- Shop: Rubber Bushing w/Steel Sleeve - 1" Inner Diameter - 2" Outer Diameter - 3" Long
- Shop: Hayes Spring Eye Bushing for 10k Springs
- Shop: Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 1" Center Hole
- Shop: Dexter 6-Leaf Slipper Spring for 9,000-lb Trailer Axles - 30" Long
- Search Results: e37sr
- Search Results: e74sr
- Shop: Suspension Enhancement
- Q&A: Troubleshooting End of Slipper Spring Popping Out on 2023 Outlaw Gooseneck Flatbed Trailer
- Search Results: akebrk~7~sa
- Q&A: U-Bolts For Roadmaster Comfort Ride For 8,000 lb 3 Inch Axles
- Q&A: Difference Between Dexter Hub and Drums 42866UC3 & 42866UC3-EZ
- Q&A: What Is The Recommended Lug Nut Torque On 7,000lb Axles?
- Q&A: Will the Roadmaster Comfort Ride Leaf Spring Suspension Kit 8K Work With 7K Axles
- Q&A: Is There A Replacement for a Bargman Door Latch 10-30-051
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Do You Offer a 13-1/8" Long Equalizer for 2" Slipper Springs Without any Hardware?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Charge a Dump Trailer Battery
- Article: Trailer Wiring Diagrams