Recommended Equalizer Kit for 2 Inch Slipper Springs on Dual 9,000 lb Axle Trailer
Question:
The question I have is about this kit my trailer has 2inch slipper springs but my trailer has 6 leaf springs the kit that Im looking at says it is for 4 leaf springs but all the measure ments are the same as mine on my trailer I have a dual tandem 9000 lb dexter axles will this kit work on it
asked by: Michael
Expert Reply:
The Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 17-3/8" Long Equalizers # HAP-205-02 will work with your tandem 9,000 lb axles. It is designed to be used in conjunction with the Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear # HAP-105-00.
The Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing # HAP-105-205-01 is also the complete kit.
If you just want the equalizer you can use the Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 1" Center Hole # 13-117-03.
It sounds to me like you are a little confused about our description of being a system for 4 leaf springs. That is the number of slipper springs in the system, not the number of leafs in each spring stack. I hope that helps, but let me know if you have further questions.
Products Referenced in This Question
Equalizer for 2" Wide Slipper Springs - 13-1/8" Long - 1" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 13-1/8 Inch Long
- Tandem Axle
- Triple Axle
- Dexter
more information >
Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- Dexter
more information >
Dexter Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 38" Axle Spacing
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Product Page this Question was Asked From
Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 17-3/8" Long Equalizers
- Trailer Suspension Parts
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 17-3/8 Inch Long
- Tandem Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Disc Brake Conversion Parts For 10,000 lb Dexter Axle Made Before 2009
- Q&A: Disc Brake Kit Recommendation for Dexter 10k Rated Trailer Axle
- Q&A: Trailer Hub Recommendation to Replace Dexter 8-155
- Q&A: Installation if EcoHitch 306-X7196 on 2008 Toyota Prius
- Q&A: How to Determine Needed Pilot Diameter of Steel Dual Trailer Wheel
- Q&A: What is Trailer Wheel Pilot Diameter
- Q&A: Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado