Dexter Tandem-Axle Trailer Equalizer Kit for 3" Slipper Springs - 24-3/4" Long Equalizers

Video Transcript for Review of Redline Trailer Leaf Spring Suspension - Tandem-Axle Trailer Equalizer Kit - HAP-203-03

Hi everybody. Andy here with etrailer.com and today we're gonna take a brief look at this Dexter tandem axle trailer equalizer kit. Now this kit includes the equalizers, the bolts and the center hangers for attaching four three inch slipper leaf springs to your trailer frame with 10,000 pound to 15,000 pound heavy duty Dexter axles. Now you can use this with the kit number that I have there for you on your screen and that kit on your screen includes the front and rear hangers and the mounting hardware necessary for a complete tandem axle kit. So if you are in need of that kit as well you can take that item number that you see there on your screen and put it in the search field of our website and that will take you to it. Now this kit includes everything that you see here on the table before me.

You're going to receive first of all two four and one eighth inch tall center hangers with one and one eighth inch bolt holes is just to show you where we get the height of those hangers how we measure them. In case you are unaware of that, you just line up your ruler or tape measure there at the center of the bolt hole measuring all the way to the top. And let me see if I can hold that steady. And as you can see, that's where we get our four and one eighth tall measurement on these two center hangers. And then you're also going to get one left and right hand equalizers and these equalizers are going to allow for 48 and a half inches between your axles and these equalizers themselves, their length they measure right at 24 and three quarters inches long.

So I just want to confirm that they're with you. So as you can see, 24 and three quarter inches long on both of these equalizers. And again, they are going to allow for 48 and a half inches between your axles. And then you're going to receive two four and a half inch long by half inch diameter spring keeper bolts with two half inch in diameter lock nuts that I have attached to the bolts. And then two five and a half inch long by one inch in diameter spring eye bolts with two inch in diameter lock nuts that I have attached.

And then finally two six inch long by one and one eighth inch in diameter equalizer bolts with two one and one eighth inch in diameter lock nuts. Instructions are included with this kit to walk you through the installation process, and I do wanna point out that this does not include the components for mounting axles to springs. Well that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me.