U-Bolt Plate for 1-3/4" Diameter Axle, 1-3/4" Wide Spring - 3/8" Bolts - Galvanized
(9 reviews)
Price: $9.04
In Stock
U-Bolt Plate for 1-3/4" Diameter Axle, 1-3/4" Wide Spring - 3/8" Bolts - Galvanized
Item # CE20015G
Retail:$17.55
Our Price: $9.04
You Save: 48%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
CE Smith Trailer Leaf Spring Suspension - CE20015G
- U-Bolt Plates
- Boat Trailer
- Snowmobile Trailer
- Round Axle - 1-3/4 Inch
- 2000 lbs
- 3/8 Inch Diameter
- CE Smith
Flat plate measures 2-1/4" x 2-1/4" (from center of hole to center of hole). Attaches axle to leaf spring using 3/8" diameter U-bolts (sold separately). Galvanized steel is rust resistant, making it great for boat trailers.
Features:
- U-bolt plate acts as part of a trailer suspension system
- Helps secure a 1-3/4" diameter axle to a 1-3/4" wide leaf spring
- Requires (2) 3/8" diameter U-bolts (sold separately)
- Galvanized steel is durable and corrosion resistant
- Great for use on boat or snowmobile trailers
- Made in the USA
Specs:
- Length: 3-1/2" overall
- 2-1/4" From center of hole to center of hole
- Width: 3-1/2"
- 2-1/4" From center of hole to center of hole
- Bolt hole diameter: 7/16"
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
20015G U-Bolt Plate for 1-3/4" Diameter Axle, 1-3/4" Wide Spring - 3/8" Bolts - Galvanized
Video of U-Bolt Plate for 1-3/4" Diameter Axle, 1-3/4" Wide Spring - 3/8" Bolts - Galvanized
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for CE Smith Trailer Suspension CE20015G Review
Today we're going to be taking a look at the U-Bolt Plate for trailer suspension systems. The U-Bolt Plate is going to help secure a 1 3/4 inch diameter axle to a 1 3/4 inch wide leaf spring. This does require two 3/8 inch diameter U-Bolts, the U-Bolts are sold separately. If you're in need of those, you can find them here at etrailer.com. The four outer holes on this unit are designed to accept a 3/8 inch diameter bolt. The unit's made from galvanized steel so it's very strong and durable.
As well as corrosion resistant so this would be great for use on both trailers or any application that's exposed to moisture. The product is made in the USA. We're going to take a look at some of the overall dimensions real quick. Measuring from edge to edge going this direction. It's going to measure 3 1/2 inches. These holes are going to be separated on center by 2 1/4.
Measuring this direction, outer edge to outer edge. We're looking at 3 1/2 inches, and then again these holes are going to be separated by 2 1/4 of an inch. That's going to do it for today's look at the U-Bolt Plate from CE Smith.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
U-Bolt Plate for 1-3/4" Diameter Axle, 1-3/4" Wide Spring - 3/8" Bolts - Galvanized - CE20015G
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
Flat plate measures 2-1/4" x 2-1/4" (from center of hole to center of hole). Attaches axle to leaf spring using 3/8" diameter U-bolts (sold separately). Galvanized steel is rust resistant, making it great for boat trailers.by: Mark02/21/2024
etrailer is Amazing...Great customer service always reaching out to make sure your satisfied...My order was quick and easy to order
by: Brad 08/15/2020
I looked all over and no one had these it seems that everybody had 2 inch. My boat trailer is an older one probably from the 1970s with a1 3/4 axle not that common anymore. Thanks etrailer just what I needed.
by: COG06/29/2017
Just as described. What can you say about a plate. Good shipping and excellent website.
by: Gary 10/10/2019
Just what the dr. ordered. I couldn't be happier. Fast delivery.
by: Thomas 12/10/2019
worked fine
by: Gary 05/27/2021
This worked well.
by: Edward02/14/2019
Perfect fit. Just what I needed.
by: Joe 10/27/2023
by: Sean 07/18/2021
9
9
See what our Experts say about this CE Smith Trailer Leaf Spring Suspension
- What are the Hole Diameters of the CE Smith CE20015G?I contacted CE Smith to verify the sizing, and the center hole on the # CE20015G is 7/16". They also verified the 4 holes around the edges are indeed 3/8" as well. The 1 3/4" is referring to the diameter of the axle and width of the leaf spring this can be used with. If you are looking to replace your current U-Bolt plate with this, it is also a good idea to replace the U-Bolts as well. The CE Smith # CE15285GA will pair with this plate and get everything secured. This is a single U-Bolt...
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Cole B
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brad G.
8/16/2021
Great!