Drop leg jack with footplate base welds directly onto your application, has 25-1/2" retracted height and offers superior side-load strength for your agricultural or industrial needs. Includes sidewind crank.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today well be reviewing part number BD195354. This is the Bulldog Square Jack. Footplate is included, has a sidewind handle. Has a drop leg. Its going to provide 15 inches of lift and its rated at 5,000 pounds. This does have a superior side load capacity when compared with round jacks.
The outer and inner tubes overlap for additional strength when the jack is fully extended and the square design provides additional support when it comes to side loading. This does have a very durable long lasting construction. Here on the outer tube, we have a weather resistant coating and here on the inner tube, we have a zinc plated finish, which is going to help it stand up nicely against rust and corrosion. Now, the drop leg is going to increase the overall extension from maximum adjustability. To gain access to that, we just need to pull the pin and then this is our drop leg. As you can see, it has 1, 2, 3, 4, 5 different mounting holes. The distance between each mounting hole is going to measure 3-1/2 inches from the center to center.
The distance from the lowest mounting hole to the highest mounting hole is 13-1/2 inches, so thats where we get our drop leg travel from. Well go ahead and place our jack back over our drop leg and reinstall our pin and secure it with a clip. This is a direct weld design, so once you find that location, youre looking forward to weld this to your trailer, simply weld it on, get it fully secure and then youre ready to go. The standard footplate is included. Its going to measure 4 inches by 7-1/2 inches. This jack is ASABE compliant. When the jack is fully retracted, were going to have a measurement of 25-1/2 inches from the bottom of the footplate to the top of our jack.
When we use the handle to fully extend it, were going to have an extension or a lift of 15 inches, so then its going to measure right at 40-1/2 inches. Then, we have an additional 13-1/2 inches of travel with using the drop leg and that is adjustable in increments of 3-1/2 inches. Our tubing width here on our outer tube is going to measure 2-1/4 inches, which is going to give us an inner tube width of right at 2 inches. Our handle has a radius of 6-1/2 inches measuring from the center of the handle to the bend of the elbow. This is going to have a lift capacity of 3,000 pounds, with a static capacity of 5,000 pounds. Thats going to complete todays review of part number BD195354.
Thats the Bulldog Square Jack with footplate rated at 5,000 pounds. .
Average Customer Rating: 4.8 out of 5 stars (20 Customer Reviews)
Drop leg jack with footplate base welds directly onto your application, has 25-1/2" retracted height and offers superior side-load strength for your agricultural or industrial needs. Includes sidewind crank.Fantastic company.... I have used them for the last couple of years and am extremely happy with the service. If you have any doubts of using E-Trailer put them to rest.
This is a great Jack, we have put them on several trailers and used them on specialty construction tools
Always a pleasurable experience. Quality product well constructed. etrailer had shipped quickly , very pleased with great service.
Great product , fast delivery time. I’m totally satisfied.
Good price
Excellent product
Prompt service. Thank you!
Have purchased this jack several times, works great!!
We have been super-satisfied with our purchase. But we have adapted them for use in a different way;we are using them for raising and lowering seats on exercise machines in our Physical Therapy offices! These replaced our having to squat to manually pull the pin and then lift the seat to the proper height.
I mounted several of these under Spartec Conveyors. Our customers wanted to adjust the heights at each end as required for different presses. They are working great.
Seems ideal for its designed use: trailer jack. I will use my in my shop however and the base is not as stable (too small) as I need so I will weld a plate steel square base to it and it should be perfect for my needs.
The product I bought is great and the people that helped me were really good, but the most amazing part was the follow up after I bought. I became concerned when I thought about when I needed the order to arrive so I called back and the person worked hard to help me but my order was not viewable to her. The next day I got an email saying my order had shipped and I got it in time. I rarely write reviews but my experience was noteworthy.
very fast ship items as described great info videos
thanks for getting to me quickly.
very fast shipping !
Fast shipping
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.