Easy Grease Trailer Idler Hub Assembly for 7,000-lb E-Z Lube Axles - 8 on 6-1/2 - Pre-Greased

See what our Experts say about this etrailer Trailer Hubs and Drums

• Parts to Convert 2017 Grand Design Momentum 376TH to Electric Over Hydraulic Disc Brake
  Thanks for the picture of your axle sticker. From that I can tell that your 2017 Grand Design Momentum 376TH has 7k axles which is exactly what the HydraStar Disc brake kit part # HSE7K-TR1 was designed to fit so it would work great on your trailer and with your 2016 Ford F-350 brake controller that has hydraulic mode.
  view full answer...
  
• Longer Wheel Studs for Use with Trailer Hub # AKIHUB-865-7-2-EZ-K
  For a longer wheel stud that fits the Trailer Idler Hub Assembly for 7,000-lb Axles # AKIHUB-865-7-2-EZ-K you would want the part # DE53GR. This would give you the additional length needed for your wheel to fit.
  view full answer...
• Suggestions For Idler Axle 8 on 6-1/2" Wheel and Tire Combo
  The Dexter Trailer Axle Beam # 8327864 includes EZ lube spindles which make greasing the axle bearings a simple process. It will measure 94" from hub face to hub face and has mounts for leaf springs 79" on center. If these are different from what you need please let me know and I will find you something closer. For the Idler Hub Assembly # AKIHUB-865-7-2-EZ-K. This will attach to the axle and give you the hub pattern that you are looking for. It also includes the EZ lube access covers...
  view full answer...
• Recommended Idler Hubs To Add Slip On Disc Brake Kit To Toy Hauler With Triple 7000lb Axles
  You sure would! For your Toy Hauler with triple 7000lb axles the Trailer Idler Hub Assembly for 7,000-lb E-Z Lube Axles - 8 on 6-1/2 - Pre-Greased # AKIHUB-865-7-2-EZ-K you were looking at will work perfectly with the Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Raw Finish - 1/2" Bolts - 7,000 lbs # K2R712. Since you have triple axles you will need six of the idler hubs and three of the disc brake kits. Now you have the electric over hydraulic actuator needed, but did not mention...
  view full answer...
• 7k Slip On Disc Brake Kit that Fits Dexter Axles of
  The Hydrastar Disc Brake kit part # HSE7K-T1SO would be the correct place to start as this is a slip-on style rotor like you are wanting and comes with the best actuator out there. Then for idler hubs that would fit behind these you'd also need the part # AKIHUB-865-7-2-EZ-K and you'd be set. This will give you the slip on style disc brake kit you are wanting that fits your 7k Dexter axles and also is widely considered to be the best system around due to speed and reliability of the actuator.
  view full answer...
• Timbren Axle-Less Suspension System Compatibility with Aluminum I-Beam Trailer Frame
  The Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion, but a thin rubber pad would drastically increase this safety. Zinc plated hardware will work well with...
  view full answer...
  
• Will Hydrastar Disc Brake Kit Fit 7k Lippert Axles
  Yes, the Hydrastar Disc Brake Kit w/ Actuator for Triple Axle Trailers # HSE7K-TR1SO will fit over hubs with an 8 on 6-1/2 bolt pattern on your 7k Lippert axles. If you don't already have idler hubs you can use the # AKIHUB-865-7-2-EZ-K. The other option is to get the full hub and rotor with # HSE7K-TR1. You will need a brake controller that is compatible with electric over hydraulic like the Prodigy P3 # 90195.
  view full answer...
  
• Replacing Axles on a 2021 Apex Nano Dual Axle Trailer With a Timbren Silent Ride or Axle-Less System
  A Timbren Axle-Less system or Silent Ride system would definitely upgrade the stock leaf spring set up on any camper or trailer. That being said, there are a couple things to keep in mind when choosing one of these systems.. The Timbren Axle-Less System # ASR5200S01 will replace the axles as well as the leaf springs. This will also give you independent suspension, which will handle nicely when towing, especially over uneven ground. The only caveat with this system, is that it specifically...
  view full answer...
• Choosing Hydrastar Disc Brake Kit for 2017 Jayco North Point With 7k Axles
  It sounds like you're trying to decide between the # HSE7K-T1SO and the # HSE7K-T1 for your 2017 Jayco North Point. I recommend the # HSE7K-T1SO with the over-the-hub rotors for the cost savings. There is no real difference between the two aside from the design. Also, if something happens to a rotor you can just replace the rotor instead of the whole assembly. I'm assuming you have a hub and drum assembly on there already for your brakes so you will also need idler hubs instead. For replacement...
  view full answer...
• Parts Needed To Update 3" Axles From Donut Wheels To More Common Trailer Wheels and Tires
  I recommend replacing your spindles with the #42 E-Z Lube Spindle # TRU37FR. This will allow you to have the more common size hub in the event you ever have a breakdown. It also gives you the ability to easily fill your hubs with grease as it has a grease zerk. For the hubs, first you will need to check with local laws that you are able to run brakes on only one of your axles. Many laws now require trailers with braking axles to have brakes on all hubs. We have the Idler Hub # AKIHUB-865-7-2-EZ-K...
  view full answer...
• Disc Brake Kit for 2020 Grand Design Solitude 390RK with 7k Axles
  The only thing your missing potentially is idler hubs for the Kodiak disc brake kit part # K2R712DAC to fit on which for that you'd want the # AKIHUB-865-7-2-EZ-K which comes with bearings so you would not need a bearing kit. The Hydrastar actuator part # HBA16 is the best around so that's a good choice, and the brake line kit part # 20TA-BLKIT would work as well. Instead of the HBA16 though we have a kit that includes all of the needed electrical components as well which for that you'd...
  view full answer...
• Will Hydrastar Disc Brake Kit Work With Dexter Hub for 7k Axle
  The Dexter # 42865-KIT will work with the Hydrastar # HSE7K-T1SO. These fit 8 on 6-1/2 bolt patterns on idler hubs designed for a 7,000 lb axle. Dexter is typically considered to be the highest quality which is why they usually cost more. The # AKIHUB-865-7-2-EZ-K is designed with value in mind but they are still very well built and as far as we can tell just as reliable. This comes pre-greased and will also work with the Hydrastar Disc Brake Kit. Personally, I would go with the money...
  view full answer...
• Trailer Hub Options For Timbren Axle-Less Trailer Suspension # TASR7KS02
  With the Timbren Axle-Less Trailer Suspension # TASR7KS02 rated for a 7,000lb capacity you will want to use either 2 of the Idler Hubs # AKIHUB-865-7-2-EZ-K or Hub/Drums # AKHD-865-7-1-EZ-K. We do have the Brake Kit # AKEBRK-7-SA if you go with the drum brakes. Either of these will pair well with the Karrier ST235/80R16 Radial Trailer Tire with 16" Aluminum Wheel # KE39JR or Kenda Karrier ST235/85R16 Radial Trailer Tire with 16" Black Mod Wheel # AM32743B depending on the size tire you...
  view full answer...
• What Are The Differences Between The Hydrastar Disc Brake Kits HSE7K-T1 & HSE7K-T1SO
  The difference between the Hydrastar Disc Brake Kits are the rotors they come with. The Kit # HSE7K-T1 comes with integral hub-and-rotor assemblies while the Kit # HSE7K-T1SO uses rotors that will slide onto a Idler Hub # AKIHUB-865-7-2-EZ-K.
  view full answer...

Do you have a question about this Trailer Hubs and Drum?