etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98853
Retail:$254.41
Our Price: $184.75
You Save: $69.66
Confirmed to Fit
2012 Toyota Sienna
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (549)
- Q & A (0)
- Photos
2012 Toyota Sienna - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- 2 Inch Hitch
- Class III
- 3500 lbs GTW
- Concealed Cross Tube
- etrailer
- 525 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Toyota Sienna's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98853 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98853
Average Customer Rating: 4.8 out of 5 stars (549 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Jed04/23/2023
2019 ToyotaSienna
I’d give it 5 stars, but one of the bolts that came in the package wouldn’t thread into the frame. I tried all 6 spots and it was definitely the bolt. All the other bolts worked in each spot. I had to run to the hardware store to buy a new bolt. Thankfully they had the specs listed in the directions. Everything else was great, just bummed about the one messed up bolt. The bolt from the hardware store went in just fine, it was 5mm longer but that didn’t appear to matter.
There is a picture of the bolt, it looks fine but it simply wouldn’t thread. It wouldn’t thread into the little thing at the hardware store either they have next to the bolts to make sure you have the correct size.
by: Steven06/06/2024
2011 ToyotaSienna
I installed the hitch on a 2011 Toyota Sienna. The hitch was easy to install, you do need to remove and trim the rear cover that is underneath, but it is very straight forward and I felt like even a kid could do it. Would like to add that I did not have to remove the exhaust hanger, I simply moved the exhaust pipe over and worked the hitch into place. I really like how there is no big hitch hanging down in the back, looks very clean, like it came that way from the factory. Worth every penny and would highly recommend!!
by: Logan07/26/2023
I love this hitch. It installed super easy using the video provided by etrailer. Bent the tabs as they recommend and didn’t need to remove the bumper. For the past year I’ve been hauling around bikes on my tow hitch bike rack and gear in my tow hitch mounted cargo box on the back of my sienna. I can carry so much stuff. I just returned from a month long trip to Maine with my cargo box and it was amazing, I was able to bring everything I needed. I love the way the hitch looks I and love how versatile it makes my sienna.
by: Matt R.12/27/2023
Unfortunately, life got busy after ordering this receiver. It looked well designed, but once I installed it 18 months later, it didn't fit very well. Because we don't plan to use the full class III capacity, the 4 bolts that lined up should work.
Katrina D.
12/28/2023
It looks to me like this hitch was slightly flexed when you received it. This is pretty easily fixable. You can use a two by four and or a vise to bend it slightly back into position. I have a link below with more detailed instructions on how to correct this. Please let me know if this helps.
Helpful Links
by: Ricky06/01/2024
2011 Lexus GS 300
Awesome finish, with great quality materials. The Draw tite was probably the only competitor, but the etrailer version was a little less. I like the matte dark better, than gloss black. Did the install by myself. The exhaust removal was a little tricky but use WD40 let it soak in and it'll come off. Love the cleaner look, only the hitch is exposed and the rest of the frame is hidden. I can pull the hitch I got from etrailer off my Lexus GS300 now lol.
by: Dan 04/21/2023
PITA to install for one bolt but trailer hitch seems well made and solid.
Dan
4/22/2024
It has worked out well for me. I don’t use it a lot but when I need to it is there.
by: Bill01/07/2024
2012ToyotaSienna
Great fit! Easy peasy installation! We installed it on a 2012 Toyota Sienna. My sons and I worked on it together and had it on in less than 30 minutes. We pulled the exhaust to the side instead of removing the exhaust hanger. We bent the tabs instead of removing the bumper cover. Installation video was super helpful.
by: Leo K.11/08/2023
Parts came on time. Watched some YouTube videos before installation. Used car ramps made me easy to access. Figured out less work: Opened cover half way and no removal the muffler holder. Things fit as they should be. And ready to pull. Happy with the quality.
by: Gorak Shep02/12/2024
This hitch receiver has worked well for the year I've had it. What was great was that etrailer had it and several other options for my 2015 Toyota Sienna. The Youtube instructional video was spot on and made the installation straight forward. Note that you should bring a friend to help lift the unit in place. It's heavy and awkward. Otherwise it's a great product.
by: Mike 04/29/2024
Clear instructions, easy installation. Clean install design with everything hidden behind the bumper fascia except for the receptacle itself. I briefly considered the higher capacity options, but their capacity exceeded the capacity of the van, plus nothing was hidden. Really happy with my purchase, and etrailer shipped it out with a quickness.
by: Mike02/14/2024
2017 ToyotaSienna
3rd Hitch from etrailer. This one went on our ‘17 Sienna. Super easy install, fit was perfect. If you’re thinking of ordering from etrailer, you should, and you can install yourself. I’d suggest double checking bolt holes in frame before removing plugs per instructions, you don’t need the middle IIRC, so I ended up removing vapor tape seal but didn’t need to.
by: Moe 12/25/2022
We love the receiver hitch! Etrailer made it easy to purchase - picking the right receiver for me and delivery was reasonable, as predicted. It is well made including paint and easy to install.
Moe
12/31/2023
I havent had to pull anything this past year but I like having the option. I live in Michigan and the hitch still looks new. I would buy another hitch from etrailer for future vehicles for sure.
by: Jason03/04/2024
2014 ToyotaSienna
Looks like it is made by Curt for etrailer. The Curt brand hitch was more expensive so opting for the etrailer one saved me about $40.00.
Install was a little difficult by myself but everything worked out. The hitch was a perfect fit on my 2014 Sienna. Some reviews on the other products offered at etrailer said the holes didn't line up properly, but that was not the case with this hitch, the holes were perfect. Install video was very helpful.
by: Tim 05/06/2024
2013 ToyotaSienna
Excellent fit with detailed instructions. Looks great with only the receiver showing. 100% satisfied.
by: Jim 03/30/2024
2013 ToyotaSienna
The shipping was fast and free. The hitch was easy to install and looks much better than standard hitches with the cross bar below the bumper.
by: Alex12/28/2023
Would have rated higher but hitch was not square when I received it either from manufacturing or shipping damage with no protective packaging. One side of the hitch was bent inward so it could not fit up into frame. Had to use a jack and wood blocking to bend hitch back to square before installing. In the pictures you can see the difference between sides compared to square.
by: Justin 02/20/2023
2017 ToyotaSienna
Worked perfect. I did not have to remove the bumper trim like it asked. Just the shield and the exhaust mount. Was done is 20 mins.
Justin
2/21/2024
It’s worked out great! It’s nice to be able to use the mini van for the smaller trailers. Easy install.
by: Lance 06/06/2024
2015 ToyotaSienna
Great Product. Straight forward installation. The installation video gave great tips and tricks for installation.
by: Dad06/18/2023
Installed this hitch over the weekend, the hitch and hardware are top notch and the install was easy, looking forward to many years of service!
by: Jared07/23/2021
2015 ToyotaSienna
Installed in a matter of a couple of hours by myself. I used a QuickJack to raise the car up. Otherwise, I would have had a time getting under there. Also used a floor jack with some 4x4s to raise the hitch in place, and then secured with a tie down before getting the 1st couple of bolts in. The image for the cutting of the undertray is not very accurat; you'll need to cut more than shown. Hauled my dirt bike with a HF carrier and had no issues. Definitely recommend this hitch and believe it was worth the extra work to install the hidden version.
Jared
7/26/2022
No complaints. Still glad I went with the hidden version, both for aesthetics and ground clearance issues. Will probably get another for one of my other vehicles at some point.
by: Marc08/22/2021
This hitch was bought & installed on our 2020 Toyota sienna XLE AWD.
It was shipped and received at my house very fast, impressive. It came well packed with no damage.
My install was a little different than the paper instructions. My under body panel looks different than the instructions but I just held it up and cut out what needed to be removed & it looks great!
If you have one of these vans it’s well worth the money and time to install one, it sits 1 3/4” in from the bumper face. It’s very nice hitch!
Marc
8/23/2022
A year later and its great! Absolutely seamless, I forget it’s there. Walking past, getting groceries or the stroller, I don’t even think about it until I need to tow. I have zero regrets in buying it.
by: Matt 11/18/2023
Has been perfect. Towed cargo trailer across the northeast and cargo tray and quad bike rack from West coast. All with the Sienna! Install video was spot on. And took about half the expected install time. Cutting template was accurate and no issues. Very happy with the hitch. Added the E trailer airbags and Curt trailer light kit. Has been flawless set up.
by: Todd 01/02/2024
2015 ToyotaSienna
I read several articles about installing a class three hitch on my daughter’s 2015 Toyota Sienna. I went with your hitch based on other reviews. Your hitch was everything that was promised. I completed my installation in under 90 minutes.
It fit perfectly. Thank you for a wonderful product at a reasonable price.
by: Scott 04/17/2024
2017 ToyotaSienna
Easy to install, absolutely no issues since installing. Would highly recommend. Etrailer has great employees who are always willing to answer questions.
by: Jarrett04/27/2020
Repeat customer here. The people at etrailer are something special!!! My favorite thing about etrailer is their high quality, high value and personable video reviews, comparisons and instructions for my model vehicle.
Shipping was stupid fast! Installation was a breeze because of the step by step how to video, did it in under 75 minutes. I got this hitch on sale too and saved a ton of money. Unbelievable!!!
Last but not least, this puppy is truly behind the bumper and hidden, I love that. And not worried about scrubbing the ground like i have in the past on a different model van and a different hitch. Thank you etrailer and great products and great service!
Jarrett
4/29/2021
I still love this hitch! Have used it a bunch on trips with a cargo carrier also from etrailer and with a pull behind trailer to pick up some dirt. Has been a great return on investment. Thank you etrailer for your services.
25
548
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Recommended Hitch, 7-Way, and Brake Controller for a 2015 Toyota Sienna I would be happy to help you set up your 2015 Sienna to tow a 2004 Starcraft Travel Star trailer. You're going to need a hitch, a pair of wiring harnesses, ball mount kit, brake controller, and a mounting bracket. I have listed the parts you will need below along with any installation videos we may have: Trailer Hitch - etrailer Class III Trailer Hitch item # e98853 Wiring Harnesses - 4-Way - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Connector item # C56261 or item # C56106...
view full answer... - Which Hitch Should I Install On My 2017 Toyota SiennaWhen it comes to installing a trailer hitch on your 2017 Toyota Sienna both the Draw-Tite and Curt hitches are close in comparison, but I recommend The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C13343. The hitch is made in The USA. It has a gross towing weight up to 3,500 pounds and has tongue weight up to 525 pounds. Be sure to check your manual to see what the actual tow rating is for your vehicle. To grow your towing experience further I recommend The T-One Vehicle...
view full answer... - Recommended Trailer Hitch with Most Ground Clearance on 2020 Toyota Sienna For your 2020 Toyota Sienna either the etrailer.com # e98853 or the Curt # C13343 Class III hitch will offer the best ground clearance out of the available options. Both feature a 2" receiver that will sit about 13 inches off the ground when installed. Between these two options I recommend the etrailer.com # e98853 because of its unique matte black finish that provides a rugged appearance while also being a bit more resistant to scratches. Otherwise these two units are virtually identical....
view full answer...
- Complete List Of Parts Needed To Tow a Trailer With Brakes Using A 2014 Toyota SiennaThe trailer hitch I recommend for a 2014 Toyota Sienna is the etrailer Trailer Hitch Receiver part # e98853 which has a hidden cross tube but if you are looking to save money the etrailer Trailer Hitch Receiver part # e98837 is also good but does not have a hidden cross tube. The trailer wiring harness I recommend is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118498 which is plug and play. I much prefer the T-One because they typically last much longer...
view full answer... - Is Threadlocker Required To Install The etrailer.com Trailer Hitch Receiver on Toyota SiennaWhen installing the etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish part # e98853 for the 2011 - 2020 Toyota Sienna thread lock is not necessary. As long as you torque down the bolts that are provided to the recommended foot lbs listed in the installation instructions and check them every couple of months they will be fine. However, using a Loctite Blue Stick Threadlocker - Medium Strength part # LT37643 is not a bad idea. I still recommend to check the bolts every...
view full answer... - Comparing the etrailer.com E98853 and Draw-Tite 76112 Trailer Hitches for a 2020 Toyota SiennaThe etrailer.com Trailer Hitch Receiver part # e98853 and Draw-Tite Max-Frame Trailer Hitch Receiver part # 76112 are both excellent options for a 2020 Toyota Sienna (All Models). I recommend the etrailer.com Trailer Hitch Receiver because the powder coating is much more durable than that of the Draw-Tite Trailer Hitch Receiver. The more durable coating is going to not only reduce the chance of rust (safety) but also reduce the risk of scratches and flaking (aesthetics). The etrailer.com...
view full answer...
- Trailer Hitch Recommendation for 2017 Toyota SiennaThe etrailer hitch part # e98853 is the best trailer hitch option for your 2017 Toyota Sienna as it's mostly hidden, has the best towing capacities, and has a matte finish which makes it a little less visible as well. I attached an install video for more info for you to check out as well.
view full answer... - Recommended Hitch w/ the Best Ground Clearance on a 2011 Toyota Sienna XLEThe Curt Trailer Hitch item # C12065 is going to give you better ground clearance than the Draw-Tite item # 36513 by 3/4". The Curt is 11-3/4" from the top of the receiver to the ground and the Draw-Tite is 11" from the top of the receiver to the ground. Neither one of these hitches do a good job of concealing the crossbar. If you are interested in a hitch that conceals the crossbar then I recommend going up to a 2" receiver and getting the etrailer Hitch item # e98853. This hitch is...
view full answer... - Does the etrailer Hitch item # e98853 Fit a AWD 2020 Toyota Sienna?Yes, it is. The etrailer Hitch item # e98853 is compatible with the all wheel drive models of the 2020 Toyota Sienna. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. I have linked an installation video below to help you get it set up. If you are planning on towing you will also need a wiring harness item # C56106 for the SE models or item # C56261 for the standard models and a ball mount kit item # C45534.
view full answer... - Recommended 4-Way Wiring Harness for a 2015 Toyota Sienna Yes, you will need to buy the wiring harness separately and we do have installation videos for both of the options for your Sienna. If your 2015 Toyota Sienna is not a SE model you will need the Curt T-Connector Vehicle Wiring Harness item # C56261. If you do have the SE item # C56106. They each attach to existing wiring so you'll want to confirm your model before purchasing. The etrailer Hitch item # e98853, you were looking at, is confirmed to fit all models of the 2015 Toyota Sienna....
view full answer... - Best Trailer Hitch for a 2016 Toyota SiennaActually the Draw-Tite # 76112, Curt # C13343, etrailer # e98853, and EcoHitch # 306-X7255 all install so that only the receiver is showing. A lot of people like this look instead of having a thick piece of steel underneath their vehicle as well. You are correct in choosing a Class III trailer hitch with a 2" receiver over a Class II trailer hitch with a 1-1/4" receiver. The reason being that they are stronger and they are compatible with many more accessories. For your application I recommend...
view full answer... - Difference Between the etrailer And Draw-Tite Trailer Hitch Receivers For A 2020 Toyota Sienna The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98853 and Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76112 are very similar in design and weight capacity. They both have a maximum maximum gross trailer weight of 3,500lbs and maximum tongue weight of 525lbs. Both hitches are bolt-on installations and have a black powder coat finish for superior rust protection. The one key difference is that the # e98853 is not rated...
view full answer... - Recommended Hitch for Carrying Bike Rack on 2015 Toyota SiennaIs your bike rack compatible with a 1-1/4 inch or a 2 inch receiver? We offer both for the 2015 Sienna. I'll typically recommend a 2 inch hitch, because it's the most popular size and therefore will have the best selection of hitch mounted accessories available for it. For a 2 inch hitch that uses a partially concealed design that places the hitch crossbar behind the bumper so it's not visible, I'd recommend the US made etrailer brand Class III hitch, part # e98853. If your bike rack is...
view full answer... - Fit of etrailer Brand e98853 Class III Trailer Hitch on 2017 Toyota Sienna SEThe etrailer brand Class III hitch you mention, part # e98853 is a confirmed fit for your 2017 Toyota Sienna. Installation will not require any trimming of the fascia, but the under-body panel shown in the instructions which I've linked will need to be trimmed or removed and permanently left off. If you elect to trim the panel, it won't be visible at from the rear of the vehicle. As you can see in the linked video, the hitch is a perfect fit. If you'll be towing with the hitch, you'll...
view full answer...
- What Local Installers do You Recommend to Install My Hitch for Me? Yes! In order to find a local installer for the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - 2" # e98853 for your 2015 Toyota Sienna, there is text underneath the product photos/videos that reads "Need help with installation? Locate installers near me." I went ahead and attached a photo that shows where this is located. From that link, you can find local installers that we recommend near your zip code.
view full answer...
- Is etrailer Brand Class III e98853 Hitch Shipped With Installation HardwareThe install hardware and install instructions for the etrailer brand # e98853 Class III hitch can be found in a plastic bag that's placed in the square receiver tube. You should have received 6) M12-1.25x40mm hex bolts and 6) conical toothed washers. If they can't be found in the receiver tube, let me know and we'll get that taken care of for you.
view full answer... - Possible to Add Third Crossbar to Roof of 2015 Toyota SiennaThere isn't a way that we can help you install a third crossbar on the roof of your 2015 Toyota Sienna so the best option would be a hitch like the etrailer # e98853 and a Rhino-Rack T-Load # RTL002.
view full answer... - Correct Trailer Hitch for 2020 Toyota Sienna Limited Premier with AWDThe etrailer Trailer Hitch Receiver part # e98853 is what I recommend for a 2020 Toyota Sienna (All Models). I checked with the manufacturer and verified that there will be no issues on a Limited Premier with AWD. The etrailer Trailer Hitch Receiver offers bolt-on installation and it has a hidden design for the best overall appearance.
view full answer... - Comparing etrailer, Curt and EcoHitch Hitch Receivers For Ground Clearance On a 2014 Toyota SiennaThe only difference in the etrailer Trailer Hitch Receiver # e98853 and Curt Trailer Hitch Receiver # C13343 is going to be the powder coat being matte black on the etrailer and gloss black on the Curt. As we have partnered with Curt to build our receivers in the matte black finish they are identical in dimensions. I do prefer the matte black powder coat on the etrailer receiver as it gives a more OEM appearance. As these both mount in the same position as the EcoHitch Hidden Trailer...
view full answer... - Trailer Hitch Recommendation for 2019 Toyota Sienna for Exhaust ClearanceThe etrailer.com hitch part # E98853 would be an excellent choice for your 2019 Toyota Sienna in terms of exhaust clearance. I attached a picture of the hitch installed and you can see that it easily fits with the exhaust with room to spare.
view full answer...
- Recommended Trailer Hitch and 4-Bike Rack For A 2020 Toyota SiennaI recommend the etrailer.com Trailer Hitch Receiver part # e98853 for the 2020 Toyota Sienna because of it's concealed cross tube design. The only portion of the hitch that is visible once installed is the receiver square which sticks through the fascia instead of installing under the bumper so it will provide more ground clearance compared to a visible cross tube design. I have attached photos for your reference. The etrailer.com hitch is also a nice matte black finish which hides scratches...
view full answer...
- Comparing Trailer Hitch e98837 And e98853 For A 2018 Toyota Sienna LYou are correct that both the # e98853 and the # e98837 will both fit your 2018 Toyota Sienna L. There are a few noteworthy differences. One difference is that with the # e98853 the crosstube will be concealed behind the bumper. The crosstube on the # e98837 will be visible under the bumper once installed. The # e98853 has a higher tongue weight rating at 525 lbs (350 for the # e98837). The # e98853 cannot be used with a weight distribution hitch, whereas the # e98837 is rated for use...
view full answer... - Hitch Pin Hole Differences in the etrailer E98853 and Curt c13343 Hitches on a 2018 Toyota Sienna I would be happy to help you. I took a look at the installation videos for both the Curt item # C13343 and the etrailer item # E98853 and it looks like the bumpers on the Sienna's are slightly different causing the discrepency in the measurements. The hitches are identical with the exception of the powder coating on the etrailer item # E98853 being flat. They are both manufactured by Curt. Both of these hitches are confirmed to fit your 2018 Toyota Sienna. They bolt directly to your van...
view full answer... - Best Hitch and Trailer Wiring for 2017 Toyota Sienna XLE AWDThe best hitch option is the etrailer # e98853 which has the most tongue weight capacity of the hitches that fit your 2017 Toyota Sienna and has the best ground clearance since it has a concealed crosstube. I attached a picture of this hitch installed as well as a link to an install video. For trailer wiring then the best option is the Tekonsha kit part # 118648 as it's very easy to install and also very reliable. Since you wanted to do some towing you might be interested in etrailer...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Dustin K
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Chris R
Video Edited:
John S
Updated by:
Wilson B
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jed
4/24/2024
A year out and working great. No problems at all.