bing tracking image
  1. Trailer Hitch
  2. Nissan
  3. Rogue
  4. 2018
  5. etrailer
FITS 2018 Nissan Rogue
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Item # e98846
Retail:$258.63
Our Price: $161.51
You Save: $97.12
Trailer Hitch
Confirmed to Fit
2018 Nissan Rogue

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
The best technical support and full trailer hitch installation instructions. Great price Rogue trailer hitch and expert service. Nissan Rogue, 2018 trailer hitch by etrailer are available from etrailer.com. For expert service call 1-800-940-8924 to order your etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part number e98846, or order online at etrailer.com.
  • All Info
  • Reviews (1018)
  • Q & A (0)
  • Photos

2018 Nissan Rogue - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • 3500
  • Concealed Cross Tube
  • 525
  • etrailer
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Nissan Rogue's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 525 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e98846 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E98846 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
525 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Underbody trim panel must be modified or trimmed if present





Customer Satisfaction Score:


Customer Reviews

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98846

Average Customer Rating:  4.8 out of 5 stars   (1018 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

by: 06/28/2023

Quality product that appears to be well-made.
Shipping
container could have been more sturdy (it busted through the box in three places).
Install instructions were simple but helpful (socket sizes to remove the tow hook bolts and install the tow hitch, extension, how to remove the plastic retainers).
Install was very easy and I didn't need to unhook the exhaust as suggested by the instructions. Only a small amount of trimming was necessary for the rock guard to fit around the hitch.

Leo

6/29/2024

No issues one year on, still performing as expected, though I only use it for a bike rack.



by:

For the most part I am very happy with this wiring kit. Assembly was easy and everything fit perfectly. However, I didn’t run the hot wire (black) to the battery. That would have made the installation much more difficult. I simply spliced in a 12 volt plug. When I use the trailer I just plug it into the receptacle in the rear of the car. I attached 2 photos of my hot lead. This option works great.



by:

Installed on 2018 Rogue. Easy install. Works well for my intended purposes. I use it for storage and transportation racks. It is a little off center, but I don't use it for towing.

Jr

10/6/2023

Still holding strong after 1 years use.

Etrailer Expert

Mike L.

10/21/2023

@Jr We're glad to hear that! What do you use the # e98846 hitch for?


by:
2016 NissanRogue

63 years old. I have finally found the first project in my life that actually went as easy at it should have! The accompanying videos were spot on. Ran the back end up on ramps. Secured the front wheel. No need to drop muffler. Done in less than 30 minutes. Still can’t believe it was this easy of an install.

Pete

6/25/2024

After a year of use I am happy to say the hitch is as solid today as the day I installed it!



by:
2016 NissanRogue

The parts look great and fits the car perfectly. Had a test drive with a 2 bicycle rack mounted and it was perfect. The package was damaged in some areas upon delivery and some color damage was showing at 2 spots (minor). The installation video was very helpful and made the installation an easy job

Golan

4/14/2024

Working flawlessly for the past year!

Etrailer Expert

Bud M.

5/13/2024

@Golan Great to hear. Thank you for the update.


by:

Shipping isn't the greatest. I understand that it is a 40ish pound metal, but packaging could be better. Returned the 1st one sent and got another one, but even then there was another hole in the package.

Customer service was quick to send me another one and I loved how quick it was.

Currently live in AZ so chipping in the paint doesn't matter since there isn't a big rust issue. But will be moving to WI soon and some places still use salt. Don't want rusting already.

Saw some minor paint chipped areas on the 2nd one sent. Not as bad as the first one sent.

Not sure why they used a 19mm for the new bolts. Was annoyed that the old ones was 18mm and then swapped to 19mm.

Easy installation. Forgot the name of the piece but think it was a elbow socket, so I didn't even need to waste my time taking off the exhaust.

Had some left over green spray paint so I used that to spray over the chipped areas instead of wasting $ on black paint.

Overall, not sure if I would go with etrailer again for my trailer needs. Loved how fast customer service worked to resolve my issue. Packaging needs to be better. It's a hitch receiver, a piece of metal... not much to say about it except I hope the ugly spray job prevents rust! I mean it will rust eventually, just don't want the life span of it to be less.



by:

My overall assessment of the product is that it meets the basic requirements, but there are some notable issues with its packaging and alignment. Like others have pointed out, the packaging was insufficient considering the weight of the product, leading to concerns about its integrity during shipping. Additionally, there was an alignment issue with the third bolt hole on the driver's side, which was not mentioned in the installation videos on etrailer.com. While the website suggests bending and flexing the product to address this, I believe such modifications shouldn't be expected from customers, and it reflects poorly on etrailer's quality control.

Given these concerns, I'll primarily be using the product for lighter applications like a bike rack or cargo rack. However, I'm apprehensive about the reliability of the third bolt. If I happen to be in the vicinity of etrailer in St. Louis, I might consider visiting them to rectify the issue. Other than this, I was happy with the process and the product.



by:

The hitch was very easy to install! However, I could only get 4 of the 5 bolts to work. The fifth bolt hole (driver side closest to the front) half covered the hole in the frame.). I only bought it to haul our bicycles so this should be fine but I wouldn’t try it under full load.



by:

Fairly easy to install, even for a 64 year, like me. Just had a little trouble with the bolt holes being rusty on drivers' side and passenger side had a plate I had to remove.



by:

Perfect fit didn't have to remove anything on the car just 5 bolts and i was ready to go. Also best price online and exceptional quality. This is the 2nd hitch i have purchased from etrailer for different cars and will be coming back if need anymore.



by:

If it weren’t for careless shipping (or maybe substandard packaging) I’d be much happier! There were four places where the Diana’ finish was scratched down to bare metal. This means, before I can even install it, I’m going to have to paint it so it doesn’t rust in those places. I’m stunned that there was so little packaging or protection besides the outer cardboard box and two, thin wrappings around the frame. The hitch may function great…after $7.50 in paint and an hour of my time.



by:

2018 Nissan Rogue (not the Sport model). Perfect fit. Hidden well. Will order again from etrailer for my next car.

I use a longer ball mount to ensure trailer clears the bumper. For the electrical I purchased the Nissan wiring harness and cut the end off instead of going through the floor of the car (not a good idea in my opinion). Instead I used the connector portion that came from etrailer and hang it out the hatch when needed (also avoids the weather wear).

Ed

3/24/2021

Perfect. Ive used it several times pulling a 5x8 trailer. Still 5 stars!



by:
2019 NissanRogue

Excellent product; fit my 2019 Rogue exactly as described in the very helpful video; had no problem installing the hitch which took about 30 minutes (the holes lined up perfectly and I didn't even have to jack up the car or put it on a lift); especially satisfied with the expeditious delivery which took about 4 days. I plan to use it with the Swagman XC 2-bike rack platform style that I ordered from etrailer to carry my wife's and my bikes on vacation trips.

Peter P.

8/9/2020

Works out great. Im very satisfied with both the receiver &amp the rack.



by:

I've had this hitch on my vehicle for over a year and still holding strong. No rust at all. I highly recommend this hitch.



by:
2017 NissanRogue

Well explained. Easy installation. Just what we needed. Fair price.



by:
2018NissanRogue

Amazingly quick delivery...a couple days. One piece so pretty simple, actually it won't go on wrong. Still tricky lining up holes and holding it in place for bolts...definitely a two man job (and one fairly strong, holding it in place). Only real challenge was removing and reinstalling the rubber/plastic covers from the vehicle. Very heavy duty, haven't towed yet but looks like the car will fail before the hitch does!

James

8/14/2023

Great! Simple but not necessarily easy to install...had to move a few things under car around, but with neighbors help, AOK.



by:

Product is well made, fit as described….. no adjustment need.. can be self installed…. I am very happy with this product.

Jimmy W.

5/15/2024

Perfect….. easy installation, no fit issues … would and do recommend



by:

Excuse the dark picture but I installed the hitch by myself as soon as I got home when I saw that it had been delivered. Hitch receiver is very well made and high quality. Everything aligned perfectly and it looks awesome installed. The only thing visible is the receiver tube. Absolutely cannot beat this hitch for the price. Thank you etrailer!

Kenny V.

5/6/2022

Its been a year and everything that I said previously still stands. I use my hitch every weekend and it has held up to everything.



by:

Sturdy hitch. We connected a bike rack to it and it hold very well. We are connecting a pop camper this summer and we will see how it holds. If I don't come back here for a second review, that means I stand by my initial review.



by:

Looks nice feels solid and installs simply. This hitch is exactly what I needed for the bike carrier I use and couldn’t be happier. Installed on my 2008 Nissan Rogue with my only troubles being the rogues frame being a little crusty making the bolts tough to screw in on the left side. Nothing brute strength and spray lube couldn’t handle though. Did not need to move the exhaust or modify anything as it fit perfectly.

Joe

7/11/2020

Fantastic. Absolutely no issues



by:
2012 NissanRogue

The trailer hitch receiver for my 2012 Rogue was easy to install. We did not need to drop the muffler. The holes lined up perfectly. The only problem we had was removing the rust from the exposed weld nuts to attach the hardware on the driver's side.
Fast Delivery- received it before expected

Etrailer Expert

Sierra K.

7/20/2021

Thank you for your review. Here are some helpful tips for cleaning weld nuts:



by:

Fantastic quality, looks great on vehicle and have towed over 50 times, way to go etrailer, home run on design and functionality



by:
NissanRogue

This receiver was hands down the best investment into our rogue we ever made. It paid for itself by allowed us to save on moving cross country with my bike attached to our car. Shipping pricing was almost double & I was able to keep our bikes with us & secure the entire trip. Now two almost 3 years on the hitch has seen a full range of uses.

Installing from etrailers was perfectly fit to the car. The only challenge was putting bolts into the corroded threaded holes of our car. If I could have put this trailer hitch on the day we bought our car, I would have. Cleaning the holes out was as simple as a wire brush attachment to my drill & some like machine oil to clean the rusted dust out the factory holes.

I haven’t done a full weight test but I was able to pull my small mower trailer around our farm. This is by far our best investment to our little car & we’re now ordering roof rack accessories for our next vehicle.



by:

Easy install, great quality, fast shipp ing



by:

Hitch working great. Pull my trailer and teardrop camper with it. Was easy to install. If you need a hitch check out these guys

Jimmy

1/1/2022

Works great with both of my trailers


25
1018
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • Will etrailer Trailer Hitch Receiver e93ZR Work With Lift Gate Sensor On 2021 Nissan Rogue SL?
    I would be happy to help! A trailer hitch receiver like the etrailer Trailer Hitch Receiver # e93ZR will partially block the rear lift gate sensor on your 2021 Nissan Rogue SL but it will still work by placing your foot on either side of the receiver. You will want to move your foot in and out until you find the sweet spot for the sensor. I recommend going with the # e93ZR due to it having a nice matte black powder coat finish that will blend in nicely black trim on your vehicle, and...
    view full answer...
  • Trailer Hitch for 2020 Nissan Rogue to Carry Kuat NV 2.0 Bike Rack
    The etrailer hitch part # e98846 that you referenced would be a great hitch choice for your 2020 Nissan Rogue to carry a Kuat NV 2.0 bike rack part # NV22G. The etrailer hitch is mostly hidden since only the hitch hangs below the rear bumper and has the highest tongue weight rating which is why I recommended it.
    view full answer...
  • Will etrailer Trailer Hitch Receiver Fit 2019 Nissan Rogue Sport
    The # e98846 hitch you were looking at is designed to fit the 2019 Nissan Rogue. For the 2019 Nissan Rogue Sport you would need the # e79YR instead. This has the same capacity, bolt-on installation, and a 2" receiver. The only difference is the design to fit the Sport model. If you plan on towing, you will also need wiring and a ball mount. The Curt T-Connector Vehicle Wiring Harness # C56397 plugs into the connection points in your rear cargo area. This will provide you with a 4-way...
    view full answer...
  • Class III Trailer Hitch and Wiring for 2018 Nissan Rogue
    We do have a towing set up, including a Class III, 2 inch trailer hitch receiver that will fit your 2018 Nissan Rogue. Let's start with the trailer hitch, and the best option for your Rogue is the etrailer Trailer Hitch Receiver # e98846. This hitch has the best capacities, is a complete bolt-on installation, and a rugged matte black finish that is going to hide the inevitable nicks or scratches better than the glossier finish of the other hitches that fit your Rogue. Along with the...
    view full answer...
  • Will etrailer Trailer Hitch For 2011 Nissan Rogue Allow Hatch to Open w/ Kuat Transfer V2 Bike Rack
    Excellent choices for your 2011 Nissan Rogue, and you will indeed be able to open the rear hatch with the hitch and Kuat rack you asked about: - etrailer Trailer Hitch Receiver # e98846 - Kuat Transfer V2 Bike Rack # KU84FR With no bikes on the rack, you will have full rear hatch access, opening it up completely without issue. If you have bikes on the rack, when you tilt the rack down - depending on how long the handlebars on your bikes are - it may not allow the hatch to go all the...
    view full answer...
  • Trailer Hitch Recommendation that Fits 2015 Nissan Rogue SV
    The etrailer hitch # e98846 would be a great hitch for your 2015 Nissan Rogue SV AWD. It's mostly hidden as only the hitch opening hangs below the rear bumper (also helps with ground clearance), and also has great towing capacities as well. It actually fits all models of the 2015 Rogue which is how it fits the SV models. If you need trailer wiring too the Curt kit part # C56033 would be a great option as well. It does not require any splicing of the vehicle wiring since it is a custom fit.
    view full answer...
  • etrailer Trailer Hitch Receiver # e98846 Driver's Side Mounting Bracket Clearance of Exhaust Hanger
    The etrailer Trailer Hitch Receiver # e98846 will have a larger notch for the exhaust hanger on your 2011 Nissan Rogue that is coming into contact on your Draw-Tite Hitch # 75902. I felt that the best way to show you is with a picture that I have included of the etrailer hitch installed on the Nissan Rogue. You can see where the bolt hole is in relationship to the notch in the receiver for the exhaust mount. This will help you to see if the exhaust hanger on your Rogue will interfere...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch Recommendation for 2017 Nissan Rogue
    The etrailer hitch part # e98846 would be a great option for your 2017 Nissan Rogue as it's mostly hidden and has plenty of towing capacity. Like all of the hitches that fit your vehicle there will be some fascia trimming needed and the panels will have to be removed temporarily for install which is standard for hitch installs on your vehicle as well as others. I attached an install video for this hitch on a similar 2017 Nissan Rogue. For trailer wiring then the Tekonsha kit part # 118480...
    view full answer...
  • Will A Hitch Mounted Cargo Carrier Affect The Rear Automatic Braking System On A 2019 Nissan Rogue?
    Yes, we have had issues in the past with trailer hitches and accessories affecting the Rear Automatic Braking system on the 2019 Nissan Rogue. Basically it will detect the hitch and carrier and may cause the brakes to activate while you are backing up. We have not found a work around as of yet. Your best bet would be to contact a Nissan Dealership to see if they know of a way to bypass or deactivate this sensor.
    view full answer...
  • Trailer Hitch Receiver, Wiring, and Ball Mount For Towing a U-Haul Trailer With a 2018 Nissan Rogue
    I recommend the etrailer Trailer Hitch Receiver # e98846 for your 2018 Nissan Rogue. This receiver is rated for 525lbs of tongue weight and 3,500lbs of total trailer weight. Be sure to verify your maximum towing capacity with your Nissan dealer. The etrailer Ball Mount Kit # 989900 will provide you will 2 ball mounts and a 2" or 1-7/8" ball. Either ball will fit the U-haul trailer you intend to haul but the ball mounts have different amounts of rise(1"or3") to allow you to best level...
    view full answer...
  • Recommended Trailer Hitch for Use with Cargo Carrier on 2017 Nissan Rogue
    If you are looking for a trailer hitch for your 2017 Nissan Rogue, I recommend our etrailer Trailer Hitch Receiver # e98846. This is a Class III trailer hitch that has a 3,500 lbs towing capacity and 525 lbs tongue weight capacity, which is more than enough for a hitch-mounted cargo carrier to carry an electric scooter. You should also verify the towing and tongue weight capacities of your vehicle, which is usually listed in the owner's manual. If your vehicle weight capacity is lower,...
    view full answer...
  • Trailer Hitch Receiver For a 2016 Nissan Rogue
    The Curt Trailer Hitch Receiver # C13902 is a multi fit hitch that is not designed for one particular vehicle but will fit on several models with some drilling. This particular hitch is for Chevrolet, Ford and Dodge Trucks. I recommend the etrailer Trailer Hitch Receiver # e98846 for your 2016 Nissan Rogue. This hitch is custom fit to bolt to into the factory weld nuts that are on your Rogue. This hitch is rated for 525lbs of tongue weight and 3,500lbs or trailer weight. Be sure to check...
    view full answer...
  • Torque Specifications for Installing etrailer Receiver Hitch e98846 on 2015 Nissan Rogue
    The Torque Specification is found in the installation instructions on our product page on the etrailer # e98846 receiver hitch. A Torque Wrench # PT87ZR would be the type that you would need to achieve that rating.
    view full answer...
  • Recommended Class III Trailer Hitch for 2018 Nissan Rogue That Doesn't Require Lowering Exhaust
    The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98846 does not require the exhaust to be lowered during installation, so it's exactly what you're looking for. I really like the matte black finish on this hitch, so it's going to do a great job of hiding nicks/scratches and dirt, and this is a Class III hitch with a 2" receiver like you're seeking. I've linked an installation video of this hitch for you to check out that details the process. I've...
    view full answer...
  • What size Bolts Are Used For the etrailer Receiver On My 2012 Nissan Rogue?
    According to the instructions that I have linked below the 5 bolts used are M12-1.25 x 35mm for the etrailer Trailer Hitch Receiver # e98846.
    view full answer...
  • Will etrailer Hitch for 2014 Nissan Rogue Work Great with Bike Rack
    Yes the etrailer hitch part # e98846 that you referenced that fits the 2014 Nissan Rogue SL would work great with a bike rack like the Hollywood Racks Trail Rider part # HR200Z.
    view full answer...
  • How to Install Trailer Hitch on Vehicle that is Missing Weld Nuts in Trailer Frame
    What you can do is use a bolt leader like # 80101-1 with a carriage bolt block through an open portion of your frame to basically act as a weld nut so you can install the hitch. This normally is a solution we use when a vehicle has a broken weld nut and we have to come up with a way to install the hitch. We made a video on how to do this which I have attached to this page. Best option will be to source a carriage bolt (it will have square shoulders under the head of the bolt) the correct...
    view full answer...
    Image 1 for
  • Best Trailer Hitch for Bike Rack On a 2018 Nissan Rogue
    The etrailer Trailer Hitch Receiver part # e98846 is what I recommend using to install a bike rack like the Swagman Trailhead 4 Bike Rack part # S63380 on a 2018 Nissan Rogue. The etrailer hitch has a hidden design and matte finish for a clean finished install look and it offers bolt-on installation.
    view full answer...
  • Recommended Trailer Hitch and Trailer Wiring Harness
    For a hitch, I'd recommend the etrailer brand # e98846. The hitch itself is manufactured in the USA, and has a 525 lb tongue weight/3500 lb towing capacity. Per the owner's manual, the vehicle's towing capacity is limited to 1100 lbs towing/110 lbs tongue weight. For a trailer wiring harness, I prefer the Tekonsha # 118480 over the Curt # C56033 you'd looked at . You'll also need a # 2753 ball mount which includes the hitch pin, and either a 1-7/8 inch trailer ball, part # 19260 or a 2...
    view full answer...
  • Will Trailer Wiring Harness Fit 2017 Nissan Rogue SV
    Yes it will! I am happy to confirm for you that your 2017 Nissan Rogue SV is absolutely compatible with the T-One Vehicle Wiring Harness # 118480. I have added a link below to a video install for you to check out as well. Additionally, if you plan on doing some towing and need a trailer hitch for your 2017 Rogue I recommend the etrailer Trailer Hitch Receiver # e98846.
    view full answer...
  • Recommendation For Bike Rack on 2012 Nissan Rogue With a Rear Spoiler
    Since your 2012 Nissan Rogue has a rear spoiler the only trunk mount bike racks that will work are the suction-cup types like the # 298-BH1302 or the # 298-BK1910-AB. Instead, I recommend a hitch for your Nissan Rogue and a hitch mounted bike rack. If you don't already have a hitch, the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98846 would work great. Then for a bike rack, I recommend the Thule Camber # TH9058. I attached a video of this...
    view full answer...
  • Does Trailer Hitch for 2019 Nissan Rogue also Fit Sport Models
    The hitch fits are different between the Sport model 2019 Nissan Rogues and the non-Sport models. So what you'd need is the part # 76177 for a Class III 2-inch hitch that fits your 2019 Sport model. This has a concealed crosstube which allows it to be less visible and also helps with ground clearance. I attached an install video and a picture of what the hitch looks like installed as well. The hitch you referenced does not fit your vehicle so it would not work for you.
    view full answer...
    Image 1 for
  • Is there a Hitch for a 2019 Nissan Rogue Special Edition?
    Yes, the etrailer Trailer Hitch Receiver item # e98846 fits all models of the 2019 Nissan Rogue including the special edition. This hitch is custom fit and bolts directly to your frame with included hardware. It installs in preexisting holes and does not require any drilling or welding. I have linked an installation video and attached a picture below so you can follow along with the process and see the final product. If you need a wiring harness to control your trailer or accessories...
    view full answer...
    Image 1 for
  • What All Vehicles Does the etrailer Trailer Hitch Receiver e98846 for a Nissan Rogue Fit
    The etrailer Trailer Hitch Receiver part # e98846 is a fit for the following vehicles: 2008 - 2020 Nissan Rogue 2010 - 2011 Nissan Rogue excluding Krom 2014 - 2015 Nissan Rogue Select Please note, trailer hitches are vehicle specific so they only fit vehicles with the same chassis.
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Michael B
Video by:
Michael B
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Wilson B
Updated by:
Wilson B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.